Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Mitre Fold Drawer 1/2 inch describes a Genesis drawer construction system that uses pre-cut blanks to assemble a finished drawer for closet installations. The drawer is designed for standard 24 inch wide by 14 inch deep closet openings, so it matches a common closet module without layout changes. The core of the white vinyl drawer sides is high density particle board, which delivers greater screw holding strength when you fasten slides or fronts. The drawer dimensions of 350mm by 583mm by 114mm set a consistent drawer footprint and height, which helps align multiple drawers in a Genesis system run. A 1/2 inch thick construction gives the sides a substantial profile, which supports typical residential closet storage loads. The Genesis miterfold white vinyl drawer sides are sealed with Durawrap abrasion resistant surface, so the drawer resists surface wear in everyday use and stays easy to wipe down. Vinyl material at 8 mil thickness is non-flammable, which supports use in typical interior closet environments where fire performance data matters.
Drawers assemble quickly from blanks by using wood glue, folding the sides around the matching drawer bottom and closing the remaining side onto dowels, so installers can build consistent boxes without separate side and front machining. The 1/4 inch drawer bottom dado keeps the bottom positively located in a groove, which reduces racking and helps the drawer stay square during installation of slides. A 3/8 inch bottom reveal defines the visible offset from the underside of the drawer, so the finished piece lines up predictably with closet partitions and hardware clearances. The drawer is designed for standard 24 inch wide by 14 inch deep closet openings, giving a clear fit target when planning closet sections and hardware positions. The 350mm by 583mm by 114mm sizing ties the metric dimensions to a repeatable build pattern, so production shops can standardize drawings and cut lists. Genesis miterfold white vinyl drawer sides sealed with Durawrap abrasion resistant surface mean the assembled drawer maintains a professional look throughout installation and adjustment.
The drawer is designed for standard 24 inch wide by 14 inch deep closet openings, so it works in typical residential closet systems built around that module. The 350mm by 583mm by 114mm miter fold format suits BHK Genesis drawer system layouts that rely on consistent drawer heights and depths across a run of cabinets. Vinyl drawer side heights available from 2-3/4 inches through 10 inches give a range of drawer front stacks, so closet designs can mix shallow accessory drawers with deeper storage drawers while keeping the same construction method. Genesis miterfold white vinyl drawer sides sealed with Durawrap abrasion resistant surface support closet applications where drawers slide against clothing and stored items, keeping surfaces smooth. The non-flammable 8 mil vinyl material supports interior use in closet spaces, where material performance is part of standard project requirements. The high density particle board core with greater screw holding strength fits projects that use standard drawer slides and applied fronts, because fasteners bite securely into the core along the drawer sides.
Drawers assemble quickly from blanks by using wood glue, folding sides around the matching drawer bottom and closing the remaining side onto dowels, which reduces assembly steps compared with traditional separate side, front, and back joinery. All vinyl miterfold drawers having a 1/4 inch drawer bottom dado means every drawer bottom locates the same way, so installers can set up jigs and routines that repeat without constant measurement. The 3/8 inch bottom reveal creates a consistent offset at the bottom edge, which simplifies aligning drawer fronts and hardware because the relationship between drawer bottom and side is always the same. The core of high density particle board delivering greater screw holding strength gives confidence when driving screws for runners, fronts, and internal dividers, since the substrate is engineered to grip threads firmly. Genesis miterfold white vinyl drawer sides sealed with Durawrap abrasion resistant surface help maintain clean, damage-resistant edges while the drawers are handled through cutting, gluing, clamping, and mounting. Vinyl drawer side heights from 2-3/4 inches through 10 inches allow shops to standardize tooling on the same Genesis drawer construction system while covering multiple drawer height requirements in one workflow.
The Genesis miterfold drawer has dimensions of 350mm by 583mm by 114mm, which provides a consistent drawer footprint and height for closet layouts using this BHK drawer system.
The miter fold drawer is designed for standard 24 inch wide by 14 inch deep closet openings, aligning it with typical residential or light commercial closet systems using that module.
The Genesis miterfold drawer assembles from blanks using wood glue, folding the sides around the matching drawer bottom and closing the remaining side onto dowels for a quick, repeatable build.
The 1/4 inch drawer bottom dado locates the bottom panel in a groove in the drawer sides, helping the drawer stay square and adding rigidity during installation and use.
The high density particle board core provides greater screw holding strength, which supports secure fastening of slides, drawer fronts, and internal components to the drawer sides.
The Durawrap abrasion resistant surface on Genesis miterfold white vinyl drawer sides resists surface wear, keeping the drawer sides smooth and easy to clean in everyday closet use.
This Genesis miterfold white vinyl drawer with 350mm by 583mm by 114mm sizing and 1/2 inch thick construction gives a standardized solution for standard 24 inch wide by 14 inch deep closet openings. The combination of high density particle board core, Durawrap abrasion resistant surface, and 1/4 inch bottom dado with 3/8 inch bottom reveal supports efficient assembly and consistent fit across a BHK Genesis drawer system project. For closet runs built around these dimensions and materials, this miter fold drawer helps streamline shop work while delivering a uniform finished result.
Sold In: 1 Each
