Schaub Traditional Series knob gives you a 1-1/4 inch diameter pull point, so fingers find the center of the knob quickly on doors and drawers. The solid brass construction provides a dense feel in the hand, which helps doors close with a controlled motion in everyday use. The polished nickel finish reflects surrounding light, helping this knob read cleanly against both painted and stained fronts. A 3/4 inch base diameter keeps the load spread near the mounting hole, which supports repeatable installs on standard cabinet rails and stiles. The 1 inch projection brings the gripping surface away from the face just enough for a secure pinch without feeling bulky on smaller fronts. An 8-32 threaded connection on this knob matches common cabinet hardware threading, which supports straightforward layout using standard drilling patterns.
This Schaub and Company 706-PN knob uses an 8-32 thread, which pairs with standard cabinet knob screw sizing during layout and installation. The 1-1/4 inch overall diameter lets this knob sit comfortably on both single small drawers and wider doors, maintaining proportion on typical face frames. With a 1 inch projection from the mounting surface, the gripping edge clears most door styles while staying compact enough for banks of drawers with tight vertical spacing. The 3/4 inch base diameter transitions the stem to the face, which helps cover the drilled hole while keeping a clean reveal around the knob on cabinet fronts.
This Schaub Traditional Series knob sits in the decorative knobs category, so it fits naturally on cabinet doors, vanity fronts, and built-in casework that call for a polished nickel accent. The 1-1/4 inch diameter face presents enough presence for full-size kitchen and bath doors, while still looking controlled on smaller utility cabinets. Its polished nickel finish aligns visually with other nickel-finished decorative hardware and moldings, which helps tie together pulls, hinges, and trim choices within one space. The solid brass construction positions this piece for use in higher-touch areas, since the material supports a substantial feel each time a door or drawer is operated.
On furniture-style pieces, the 3/4 inch base diameter keeps the footprint refined at the mounting point, which helps the knob land cleanly on narrow rails or slender drawer fronts. The 1 inch projection also keeps the knob from overreaching on shallow-depth cabinets, preserving clear lines on built-ins and wall units. Because the 706-PN part number defines this exact polished nickel, solid brass, 1-1/4 inch knob, it can be specified repeatedly across a project where matched components are needed.
The 1-1/4 inch diameter and 1 inch projection work together to provide a predictable grasp point, which aids consistent user feel from cabinet to cabinet in a run. The 3/4 inch base diameter covers the machining around the 8-32 threaded hole, which helps hide minor drill tear-out at the mounting location. With solid brass listed as the material, the knob carries weight through the stem and face, which helps it resist flexing when users pull hard on heavier doors or loaded drawers. The polished nickel surface reflects ambient light along its profile, which highlights the round shape and makes it easier to visually locate on darker cabinet colors.
The 8-32 thread specification directly matches the common fine-thread pattern used across much cabinet hardware, which lets installers rely on familiar drilling jigs and hardware planning. A consistent projection at 1 inch also supports accurate planning of clearances at corners and near walls, since the standoff from the face does not vary from knob to knob. The defined 706-PN manufacturer part number connects these dimensions, material, and finish to a single repeatable choice, which simplifies reorders and service work on future phases of the same project.
The Schaub 706-PN knob has a 1-1/4 inch diameter face, a 3/4 inch base diameter, and a 1 inch projection, which together set its profile on cabinet doors and drawers.
The knob is made from solid brass, which gives it a dense feel during use and supports a substantial pull on cabinet and furniture fronts.
This knob uses a polished nickel finish, which provides a bright, reflective surface that coordinates with other nickel cabinet hardware.
The 706-PN knob projects 1 inch from the mounting surface, giving enough clearance for fingers while keeping the hardware compact on tight layouts.
This knob uses an 8-32 thread size, which matches standard cabinet knob screw threading for straightforward installation on typical doors and drawers.
The 706-PN part number identifies this specific Schaub Traditional Series solid brass knob with a 1-1/4 inch diameter and polished nickel finish.
The Schaub Traditional Series 706-PN knob pairs a 1-1/4 inch diameter face with a 1 inch projection and 3/4 inch base, so it lands cleanly on typical cabinet and furniture fronts. The solid brass material and polished nickel finish give this knob both weight and visual clarity in day-to-day operation. With an 8-32 thread, it integrates easily into standard cabinet hardware layouts. For projects calling for a defined polished nickel, solid brass round knob, the 706-PN part delivers a consistent, repeatable choice.