Schaub Traditional Series distressed nickel knob gives you a 1-1/4 inch (32 mm) diameter pull point, which provides a comfortable gripping surface when you are opening cabinet doors or drawers in a kitchen, bath, or built-in run. The knob is made from solid brass, so the core material is metal rather than a plated light alloy, which matters when you want a dense feel and long-term wear on frequently used fronts. Its distressed nickel finish provides a muted metallic look, which helps the knob blend with other traditional or transitional decorative hardware where a bright, reflective surface is not desired. The base diameter of 5/8 inch steps down cleanly from the head, which creates a defined shoulder at the cabinet face and helps visually frame the contact point on the door or drawer.
This solid brass cabinet knob uses an 8-32 x 1 inch screw size, which sets the thread pattern and shaft length that engages into the knob body during mounting. That threaded connection determines how the knob clamps to the cabinet front, creating a secure attachment point on typical door and drawer panels. The 7/8 inch projection, measured from the cabinet face to the outermost point of the knob, defines how far the knob extends into the room, giving fingers room to hook behind the knob without contacting the door edge. With a 5/8 inch base diameter, the footprint at the surface of the cabinet is compact, so the knob can be positioned on narrow rails or stile locations while still covering the standard drilled hole.
The Schaub and Company 711-DN knob belongs to the Traditional Series, which ties it to decorative hardware applications that follow classic cabinet styling. The 1-1/4 inch diameter head suits cabinet doors and medium-width drawers, where a single knob centered on the front provides adequate leverage for everyday opening forces. Its distressed nickel finish supports installations where the design goal is a softened metal accent rather than a mirror-like surface, so it can be used on face-frame or frameless cabinets that call for a slightly aged appearance. The 7/8 inch projection works on upper wall cabinets or base cabinets because it establishes consistent clearance, which helps align user expectations as they move between different cabinet sections in the same room.
The Schaub Traditional Designs Series Distressed Nickel 1-1/4 inch (32 mm) diameter knob, part number 711-DN, gives installers a defined set of dimensions that guide drilling and layout. Knowing the 1-1/4 inch head diameter and 5/8 inch base diameter helps when planning backset from door edges, so the knob does not crowd neighboring fronts or decorative profiles. The 8-32 x 1 inch screw size sets the thread standard, which lets installers match the knob with their usual door and drawer thickness ranges that accept this screw length. With a 7/8 inch projection, the knob extends a known distance from the cabinet face, so the installer can coordinate with nearby obstacles such as adjacent doors or trim, maintaining smooth operation and consistent hand clearance across the project.
The Schaub Traditional Series 711-DN knob has a 1-1/4 inch, or 32 mm, diameter, giving a standard-size grip point well-suited to most cabinet door and drawer fronts.
The knob has a 7/8 inch projection from the cabinet face, which sets consistent finger clearance and helps avoid knuckle contact with the door or drawer surface when pulling.
The Schaub 711-DN knob is made from solid brass, so the entire knob body is brass, providing a metal feel and supporting repeated use on active cabinets.
This 1-1/4 inch cabinet knob uses a distressed nickel finish, giving a muted metallic appearance that coordinates with Traditional Series decorative hardware applications.
The knob is specified with an 8-32 x 1 inch screw size, which defines the thread pattern and length used to secure the knob to standard cabinet doors or drawers.
The Schaub 711-DN knob has a 5/8 inch base diameter, creating a compact footprint at the cabinet surface while fully covering the mounting hole area.
Choosing this Schaub Traditional Series distressed nickel solid brass knob gives you a 1-1/4 inch (32 mm) diameter pull point with 7/8 inch projection and a 5/8 inch base. Those fixed dimensions, combined with the 8-32 x 1 inch screw size, define how it mounts and how it feels in hand on completed cabinets. For projects calling for Traditional Series styling and a distressed nickel finish, these specifics help align your decorative hardware layout with the rest of the job. Wurth Baer Supply lists this 711-DN knob so you can match part numbers directly to your cabinet hardware schedule.