Nexis Hinge 125D Screw-On For Cabinet Doors

Nexis hinge 125D full overlay screw-on identifies this Grass Nexis self-close concealed cabinet hinge as a 125 degree opening option for full overlay doors, giving installers the clearance needed for wide door swing on face-frame or frameless cabinets using the same hinge family across projects. Grass Nexis self-close full overlay face-frame;frameless hinges in nickel finish provide a concealed look while closing the door automatically, which helps keep fronts aligned without exposed hardware on the cabinet exterior. Being a concealed cabinet hinge in the European standard hinge category places this part in a long-arm format familiar to shop workflows, so drilling and mounting steps stay consistent from job to job. The manufacturer part F015072938236 clearly identifies this specific Nexis 125 degree hinge, which simplifies reordering matching pieces for service work or additional cabinet runs.

Key Nexis Hinge Details That Support Cabinet Work

• For door thickness up to 19 mm (3/4 inch) this hinge keeps the Nexis 125 degree system suited to common cabinet doors, so standard stock panels can be drilled and hung without changing to a different hinge line.
• Cup depths of 11.8 mm for Nexis and 12 mm for Nexis Impresso define the bore depth, helping drilling setups produce consistent cup holes that seat the hinge flush without over-boring the panel.
• A hinge cup edge drilling distance of 3 mm to 6 mm gives a workable range at the door edge, so shops can keep one boring program while still fine-tuning reveal and overlay on different cabinet builds.
• Single screw side-to-side adjustment of plus 1 mm to minus 3 mm allows lateral tweaking after installation, which helps pull reveals even without re-boring hinge cups or shifting mounting plates.
• Boring patterns of 42 mm and 45 mm match common jig layouts, letting installers use existing drilling equipment and patterns while staying within the Nexis 125 degree hinge family.

Hinge Mounting And Adjustment For Practical Installation

The screw-on design of this Nexis hinge uses a "screw-on" cup fastening interface, which ties directly to standard drilling and fastening steps in the shop, so hinges can be mounted with straightforward screw attachment on the door side. Nexis hinges feature a 3-dimensional adjustment allowing fine-tuning of side, depth, and height, which lets installers dial in reveals and alignment across a run of doors without pulling parts off the cabinet. Single screw side-to-side adjustment of plus 1 mm to minus 3 mm specifically addresses horizontal alignment, which helps correct small drilling variances and still produce tight, even gaps along the face. As a concealed cabinet hinge in the Grass Nexis 125 degree family, this part supports a repeatable mounting approach that suits both face-frame and frameless cabinet construction noted in the product name.

How This Grass Nexis Hinge Performs In Use

Nexis Hinge Application On Cabinet Doors

Grass Nexis self-close full overlay face-frame;frameless hinges place this part in everyday cabinet applications where doors overlay the front and need automatic closing, so shops can standardize on one hinge line for many residential or commercial layouts. Being a concealed cabinet hinge means the hardware sits inside the cabinet, which keeps the exterior appearance clean while still providing the 125 degree opening angle identified as Nexis hinge 125D full overlay screw-on. For door thickness up to 19 mm (3/4 inch), this hinge matches common panel stock, so designers can specify typical 3/4 inch doors while relying on the Nexis system for consistent operation. Cup depths of 11.8 mm on Nexis and 12 mm on Nexis Impresso define how the hinge sits in the bore, which helps CNC programs or line-boring equipment maintain the correct seating depth for smooth swing across multiple doors. Boring patterns of 42 mm and 45 mm align to frequent drilling standards, letting installers apply the same hinge across different cabinet lines that may favor one pattern or the other while still staying in the Nexis family.

Adjustment, Construction, And Soft-Close Compatibility

The 3-dimensional adjustment allowing fine-tuning of side, depth, and height gives this Nexis concealed cabinet hinge the flexibility to correct alignment after doors are hung, which reduces rework when framings or panels vary slightly from plan. Single screw side-to-side adjustment of plus 1 mm to minus 3 mm focuses lateral movement into one fastener, so installers can bring doors into line quickly during final fit-out. Screw-on and doweled hinges feature a stamped steel cup, which provides a solid metal seating surface in the door for both fastening styles, supporting long-term use in a typical cabinet environment. Tool-less Impresso hinges use a die-cast steel cup and closing flap with all metal construction for positive and secure attachment to the cabinet door, which benefits projects that favor fast press-in installation while still expecting a firm connection at the hinge cup. Available in self-closing only, Nexis hinges pull the door shut at the end of travel, helping doors reach the closed position consistently without reliance on separate catches. Nexis hinges are compatible with the soft-close devices, so a project using this Nexis 125 degree hinge can integrate dedicated soft-close components within the same system where that function is required.

Common Nexis 125 Degree Hinge Questions Answered

Select This Nexis Hinge For 125 Degree Full Overlay

The Grass Nexis self-close full overlay face-frame;frameless hinge in nickel with 125 degree opening and 3-dimensional adjustment offers a concealed cabinet hinge solution suited to 19 mm doors. Using the Nexis hinge 125D full overlay screw-on part F015072938236 supports consistent drilling patterns, familiar European standard hinge geometry, and compatibility with soft-close devices across cabinet projects.