Hickory Hardware Crystal Palace Crysacrylic 1-3/16" (30 mm) Diameter Knob, P30-CA3

KNOB 30MM CRYSACRYLIC For Cabinet Projects

The KNOB 30MM CRYSACRYLIC is a 1-3/16 inch (30 mm) diameter knob that provides a defined handhold for doors or drawers, helping installers and users open and close cabinetry with a consistent grip point. The knob belongs to the Crystal Palace collection, which gives projects a coordinated decorative style across multiple knobs when specified together. Its Crysacrylic material forms the main knob body, so the gripping surface stays visually clear and smooth for repeated everyday use. A solid brass component used with the Crysacrylic supports the connection area, which matters when fastening the knob to cabinet fronts for long-term service. The knob has a Crysacrylic polished brass finish, which presents a bright, reflective surface that matches polished brass themes across other decorative hardware runs. The Belwith Keeler brand association identifies the manufacturer, which helps buyers match this knob to other Belwith Keeler Crystal Palace Series parts on a project.

Crystal Palace Knob Details That Support Use

• The 1-3/16 inch (30 mm) diameter spreads pulling force across a comfortable area, so drawers and doors can be operated without concentrating pressure on a small contact point during regular use.
• A projection of 1-1/2 inches offsets the knob from the cabinet face, giving fingers room behind the knob so users can grasp and pull without scraping knuckles along the door or drawer front.
• The 1-3/16 inch width matches the listed diameter, which maintains a balanced, circular footprint on the front of the cabinet, helping layouts look even when multiple knobs are arranged in a line.
• A base diameter of 1/2 inch defines the footprint at the mounting surface, which keeps the contact area compact so the knob seats neatly on narrow rails or stiles without overhanging edges.
• The Crysacrylic polished brass finish coordinates visually with polished brass decorative themes, allowing this knob to tie in with hinges, pulls, or other brass-finished fittings on the same installation.

Cabinet Knob Mounting And Screw Interface

The knob uses an 8-32 x 1 inch screw size, which establishes a standard machine-screw thread and length for passing through typical cabinet doors or drawer fronts into the knob. This thread size allows fabricators to drill straightforward pilot holes that align with common cabinet machining practices. The 1-1/2 inch projection defines how far the gripping point sits off the surface, giving installers a fixed reference when positioning knobs in relation to neighboring components or trim. A 1/2 inch base diameter provides a clear edge to caulk or finish paint around if a project requires tight visual detailing around each mounting point. The 1-3/16 inch diameter head centers on the mounting screw, so once the mounting hole is set, installers can rely on the knob geometry to self-center over that hole for repeatable placement.

Using The Hickory Hardware Crystal Palace Knob

Where This 30 mm Crysacrylic Knob Performs

The knob is categorized under decorative hardware knobs, so it serves as a primary touchpoint on cabinet doors or drawers where appearance and function need to work together. Its Crysacrylic material offers a clear, crystal-like look that suits applications aiming for a bright, glass-like accent without using actual glass. The Crysacrylic polished brass finish ties this knob to polished brass themes, which matters on projects where every visible fitting must coordinate with brass lighting, faucets, or hinges. A base diameter of 1/2 inch means the knob sits securely on modest stile or rail widths often found in residential cabinetry, helping maintain proportion on narrow drawer fronts. The 1-3/16 inch diameter face gives enough visual presence that one knob can comfortably serve typical kitchen or bath drawer widths without appearing undersized.

Details That Support Repeatable Layouts And Replacement

The 8-32 x 1 inch screw size defines a clear fastening standard, which helps when matching this knob to pre-tapped holes or when replacing an existing knob that already uses 8-32 machine screws. The 1-1/2 inch projection sets a predictable stand-off from the cabinet face, so installers can line up this knob with adjacent hardware knowing the hand clearance will be the same across every door and drawer. With a 1-3/16 inch diameter and matching width, the knob presents a true circular profile, which simplifies layout spacing when multiple knobs are installed side by side on wide drawers. The 1/2 inch base diameter offers a fixed bearing surface that seats flat against the panel, so when knobs are swapped or upgraded, the contact ring remains consistent and covers the previous compression mark on the finish. The manufacturer part number P30-CA3 uniquely identifies this specific Crystal Palace Series knob, aiding repeat orders or one-for-one replacements on future phases of a project.

Common Questions About The P30-CA3 Knob

Selecting This Crystal Palace Knob For Your Job

The Hickory Hardware Crystal Palace Series Crysacrylic 1-3/16 inch diameter knob P30-CA3 combines Crysacrylic material, a Crysacrylic polished brass finish, and an 8-32 x 1 inch screw interface to support cabinet projects that need coordinated decorative hardware. The defined 1-3/16 inch diameter, 1-1/2 inch projection, and 1/2 inch base diameter give clear layout dimensions, helping installers plan consistent spacing and hand clearance. For projects using Belwith Keeler decorative hardware, this P30-CA3 knob offers a Crystal Palace option that ties visual design to specific, repeatable measurements across doors and drawers.