
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Brush and Roller Grade Contact Adhesive gives installers a non-flammable contact adhesive option for laminate work where brush or roller application fits the job. This Formica Adhesives product is classed as a high pressure laminate adhesive, so it is built for bonding laminate to substrates in typical shop and jobsite conditions. The adhesive is designed for both porous and nonporous surfaces, which lets you handle particleboard, MDF, and laminate faces with one product. Clear color helps during layout because substrate markings stay visible through the glue line. An economy 14% solids formulation sets the working character of the adhesive, which influences film build and spread rate in day-to-day use. Sold in a 1 gallon size, it supports small production runs and typical installation volumes without constant changeover.
This Formica Adhesives contact adhesive is described as brush and roller grade, which means it is formulated to be applied with these common tools across panels and edges. An open time of 1 hour sets a generous window between application and bonding, which helps when working through multiple parts or complex assemblies before bringing surfaces together. A dry time of 3 minutes, based on conditions, indicates how quickly solvent leaves the film before contact, so panels can move from coating to assembly without long delays. Coverage rated at 110 square feet per gallon establishes how far each container goes, which supports planning for small runs or multi-sheet laminate projects. Non-flammable classification defines how the adhesive behaves from a flammability standpoint, which affects how it fits into shop environments that handle solvent-based products.
This high pressure laminate adhesive is intended for bonding laminate to both porous and nonporous surfaces, so it fits cabinet shops and millwork operations handling sheet goods and laminate faces together. Non-flammable properties are relevant in shops that operate around ignition sources, because the adhesive formula addresses flammability classification during storage and use. With a 1 gallon size, the product suits installers and fabricators doing regular laminate work without moving to drum or tote volumes. Clear adhesive color supports detailed layout on counters, panels, and fixtures where scribe lines or cut marks guide laminate placement. Because the adhesive is similar to Helmitin 4505, it speaks to users familiar with that performance profile when planning bonds on casework, fixtures, and tops.
Excellent green strength means that once coated surfaces contact, the bond holds quickly, which reduces slip when positioning laminate on vertical faces or large panels. High heat resistance gives the bond the ability to perform in areas subject to temperature swings, which matters near equipment or sun-exposed surfaces. Post-formable behavior allows forming operations after bonding, which supports work on wrapped edges and curves typical in laminate fabrication. Easy spreading and uniform coverage reduce holidays and thin spots in the glue line, which is important when aiming for even adhesion across wide surfaces. An open time of 1 hour creates flexibility in staging coated parts before assembly, which helps coordinate clamping, rolling, and trimming in a steady workflow. The stated coverage of 110 square feet per gallon allows consistent estimating of material needs, which is useful when scheduling laminate jobs through a shop or on site.
This product is a contact adhesive classified as a high pressure laminate adhesive, so it is formulated for bonding laminate to appropriate substrates in shop or installation settings.
The adhesive is identified as brush and roller grade, so it is intended to be applied using brush or roller, which matches common shop tools for coating panels and edges.
This adhesive is described as non-flammable, indicating its formulation meets a non-flammable classification, which is important information for shops handling solvent-based products.
The contact adhesive has an open time of 1 hour, giving a substantial window after application to align and bond parts during laminate assembly operations.
The product lists a dry time of 3 minutes based on conditions, meaning the adhesive film reaches a ready state for bonding quickly after application.
The adhesive coverage is rated at 110 square feet per gallon, which helps plan material usage for countertops, panels, and similar laminate projects.
This brush and roller grade contact adhesive from Formica Adhesives provides non-flammable, clear, high pressure laminate bonding in a practical 1 gallon size. With 110 square feet per gallon coverage, 1 hour open time, and 3 minute dry time, it supports steady production pacing. Excellent green strength, high heat resistance, and post-formable behavior align with common laminate fabrication needs on porous and nonporous surfaces. For shops needing an economy 14% solids laminate adhesive similar to Helmitin 4505, this product fits everyday laminate bonding work.
Sold In: 1 Each