Berenson Toccata Series Brushed Nickel 1-1/2" (38 mm) Diameter Knob, - 8249-1BPN-P
Description
Berenson Toccata Brushed Nickel Round Cabinet Knob
Berenson Toccata Series brushed nickel knob provides a 1-1/2 inch (38 mm) diameter pull point, giving fingers a broad, centered grip that helps steady opening on cabinet doors and drawers. The knob is part of the Toccata Series from Berenson Corporation, so it matches other Toccata decorative hardware for a unified look across a run of cabinetry. Its brushed nickel finish softens reflections on the knob surface, which helps visually blend with many brushed nickel hinges and other decorative hardware without drawing glare under task lighting. The knob is made from zinc die cast material, creating a solid, consistent shape that supports repeated use over time in kitchens, baths, and shop cabinetry. A projection of 1-5/16 inch keeps the hand offset from the door or drawer face, which reduces knuckle contact on thicker fronts while still keeping the knob close enough for compact spaces.
Key Toccata Knob Details For Everyday Use
- The 1-1/2 inch diameter face gives a generous contact area, which helps users get a confident grip on wider or heavier doors and drawers during daily operation.
- Zinc die cast construction provides a uniform, molded body, which supports consistent alignment from knob to knob across multiple cabinets in a project.
- The brushed nickel finish creates a muted metallic surface, which helps this knob visually coordinate with other brushed nickel decorative hardware in the same room.
- A projection of 1-5/16 inch sets the knob out from the cabinet face, which helps fingers clear door edges while still keeping profiles relatively low on narrow walkways.
- The base dimension of 11/16 inch defines a compact footprint at the mounting point, which can sit comfortably on face frames or slab fronts without crowding nearby details.
- A width of 1/2 inch through the neck area shapes the transition from base to knob head, which supports a comfortable pinch grip when pulling smaller drawers.
Installation Details For Berenson 8249-1BPN-P Knob
The 8249-1BPN-P knob uses an 8-32 x 1 inch screw size, setting a clear thread standard that works with common cabinet drilling for knob installation. That screw length suits many cabinet door and drawer front thicknesses, helping the knob seat firmly against the face once tightened. The 1-1/2 inch diameter head centers over the drilled hole, which helps hide minor drilling variations while setting a consistent reveal from door or drawer edges. With a projection of 1-5/16 inch, the knob stands out far enough that the installer can comfortably test swing and drawer travel after mounting. The 11/16 inch base dimension provides a stable contact ring around the hole, which helps distribute load on the surface during repeated pulls.
Using This Toccata Series Knob On Cabinets
Where This 1-1/2 Inch Cabinet Knob Fits Best
This Berenson Toccata Series brushed nickel 1-1/2 inch diameter knob fits well on cabinet doors and drawers that benefit from a full, rounded pull surface. The diameter gives users clear leverage on taller pantry doors, while still staying proportional on standard wall cabinets. Its brushed nickel finish pairs with other brushed nickel decorative hardware, so designers can repeat the same finish across knobs, pulls, and hinges in one layout. The zinc die cast construction keeps each knob dimensionally consistent, which supports straight visual lines when multiple knobs are mounted along a bank of drawers. A width of 1/2 inch around the neck provides enough body for a finger pinch, which suits use on smaller bathroom or utility cabinet fronts where grip matters more than ornament.
Details That Support Repeatable Knob Installation Results
The defined 1-1/2 inch diameter face helps installers quickly center the 8249-1BPN-P knob over predrilled holes, which supports even spacing when laying out grids on drawer banks. The 11/16 inch base dimension gives a predictable landing area against the surface, helping layouts look balanced when knobs are placed near rail and stile joints. With a projection of 1-5/16 inch, the knob maintains consistent stand-off from the cabinet face, which supports smooth hand clearance across every door in the run. The specified 8-32 x 1 inch screw size lets installers match their drilling and thread expectations from one cabinet to the next, simplifying repetitive installation work. Because the knob is zinc die cast, its molded form keeps each piece uniform, which helps reduce rework due to irregular shapes or inconsistent fit against the cabinet face.
Common Questions About This Berenson Cabinet Knob
What is the diameter of the Berenson Toccata Series knob?
The Berenson Toccata Series brushed nickel knob has a 1-1/2 inch (38 mm) diameter, giving a broad contact surface that helps users grip cabinet doors and drawers comfortably.
How far does the 8249-1BPN-P knob project from the cabinet?
The 8249-1BPN-P knob has a projection of 1-5/16 inch, so fingers clear the cabinet face while pulling without pushing the knob too far into tight walkways.
What material is this brushed nickel Toccata knob made from?
This Toccata Series knob is made from zinc die cast material, providing a solid molded body that supports consistent shape and feel across multiple knobs.
What screw size is used to mount this Berenson cabinet knob?
The Berenson Toccata Series brushed nickel knob uses an 8-32 x 1 inch screw size, matching common cabinet knob drilling practices for straightforward mounting.
What are the base dimensions on the 8249-1BPN-P knob?
The 8249-1BPN-P knob has base dimensions of 11/16 inch, creating a compact footprint that seats neatly on face frames or slab drawer fronts.
How wide is the neck area on this Toccata cabinet knob?
The knob has a width of 1/2 inch, shaping the neck and head so users can get a secure pinch grip when operating smaller cabinet fronts.
Selecting This Knob For Your Cabinet Project
This Berenson Toccata Series brushed nickel knob combines a 1-1/2 inch diameter face, 1-5/16 inch projection, and zinc die cast construction to support dependable cabinet operation. Its 8-32 x 1 inch screw size, 11/16 inch base, and 1/2 inch width work together to deliver consistent, repeatable mounting across doors and drawers. For projects built around brushed nickel decorative hardware, this knob provides a coordinated option that supports both visual alignment and everyday grip comfort on residential or commercial cabinetry.