Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Toccata Series weathered nickel knob identifies this piece as part of the Berenson Toccata Series, which gives projects a consistent design language across all cabinet fronts. The 1-1/2 inch (38 mm) diameter face provides a comfortable gripping surface, helping users open doors and drawers with control. A weathered nickel finish gives the knob a muted metal appearance, which supports designs that call for softer, aged nickel tones rather than bright polish. The material is zinc die cast, so the knob body is formed as a solid casting, supporting everyday cabinet use in kitchens, baths, and shop storage. An 11/16 inch base dimension creates a stable footprint on the cabinet surface, helping distribute pull forces and maintain alignment over time. Wurth Baer Supply presents this Berenson Corporation knob for projects that need decorative hardware in this exact size, finish, and style.
The 1-1/2 inch diameter, 1/2 inch width, and 1-5/16 inch projection give installers fixed reference points for drilling layouts and clearance planning on cabinet faces. An 11/16 inch base dimension defines the footprint that meets the door or drawer, helping align the knob over stile centers or drawer midlines. The knob uses an 8-32 screw size, tying directly into standard cabinet knob drilling routines already set up around this common thread, which streamlines installation workflows.
This Berenson Toccata Series knob sits naturally on cabinet doors and drawers that call for a 1-1/2 inch diameter pull point, because the round face suits both vertical and horizontal orientations. The weathered nickel finish lets it work across residential kitchens, baths, and built-ins where a subdued metal tone supports surrounding appliances and fixtures. With an 11/16 inch base dimension, the knob anchors cleanly on standard face frames and slab fronts, keeping the transition from cabinet surface to hardware tight and controlled. The 1-5/16 inch projection positions the grip at a comfortable distance from the door or drawer face, which helps on deeper edge profiles or applied moldings that sit proud of the panel. Since the material is zinc die cast, the knob integrates well into decorative hardware plans where matching zinc pieces maintain a consistent feel across all touchpoints on the project.
The 1-1/2 inch (38 mm) diameter gives installers a repeatable measurement for laying out centerlines, which supports straight, level runs of knobs across banks of doors and drawers. A 1/2 inch width and 11/16 inch base dimension define the visual weight at the mounting point, helping balance spacing between neighboring knobs on multi-drawer configurations. The 1-5/16 inch projection keeps hands away from the cabinet surface when pulling, which helps preserve finish wear patterns around frequently used doors. Using the specified 8-32 screw size means drill setups can follow standard pilot hole practices for this thread, which supports consistent torque and seating across every knob installed. The zinc die cast construction keeps each part uniform from piece to piece, helping maintain the same feel and appearance wherever this Toccata Series knob is used in the run.
The Berenson Toccata Series weathered nickel knob has a 1-1/2 inch (38 mm) diameter, which provides a full-size grip point suitable for standard cabinet doors and drawers.
The Berenson 8252-1WN-P knob has a 1-5/16 inch projection, setting the gripping surface off the cabinet face to give fingers room behind the knob.
The Toccata Series weathered nickel knob is zinc die cast, creating a solid, uniform body suited to repeated cabinet door and drawer use.
This cabinet knob uses an 8-32 screw size, aligning with common cabinet hardware threading for straightforward installation into drilled fronts.
The Berenson Toccata knob has an 11/16 inch base dimension, giving a defined footprint where the knob meets the cabinet surface.
The 8252-1WN-P knob has a weathered nickel finish, delivering a softer, aged nickel appearance across cabinet hardware layouts.
The Toccata Series weathered nickel knob from Berenson Corporation combines a 1-1/2 inch diameter face, 1-5/16 inch projection, and 11/16 inch base dimension in a zinc die cast construction. When a project calls for weathered nickel decorative hardware in this size range, this 8252-1WN-P knob from Wurth Baer Supply provides a defined option that aligns finish, diameter, projection, and standard 8-32 screw threading on cabinet doors and drawers.
Sold In: 1 Each
