Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Toccata Verona Bronze knob defines this knob as part of the Toccata Series from Berenson Corporation, so it matches other pieces from the same collection on a project. The knob is a decorative knob in the Knobs, Berenson product class, giving it a clear role as visible cabinet hardware rather than a hidden component. A 1-1/4 inch diameter head creates a comfortable gripping surface that is easy to grab when opening cabinet doors or drawers. The 1-1/4 inch width matches the listed diameter, so the knob presents a consistent round footprint on the face of the cabinet. A 1-1/16 inch projection sets how far the knob stands off the cabinet front, which affects finger clearance and the visual depth of the installation. The Verona Bronze finish identifies the color and surface look, helping installations coordinate with other Verona Bronze decorative hardware.
This knob uses zinc die cast material, defining the base metal installers will drill and mount against, which affects how it responds to typical cabinet use. The Verona Bronze finish is specified in the description, so the visible surface color and tone are fixed for coordinating with hinges or other decorative pieces in the same finish. The screw size is given as 8-32 x 1 inch, identifying the thread and length that interface with the knob body during mounting. That screw size detail matters during layout and drilling because it tells installers the thread standard that matches the knob. The 1-1/4 inch diameter and 1-1/16 inch projection combine to define how far the gripping point sits out from the mounting hole, which influences drilling patterns when knobs are placed close to adjacent doors, drawer fronts, or moldings.
This knob is classified under Decorative Hardware & Moldings with the specific category Knobs, showing it is intended for cabinet and furniture doors or drawers where a pull point is needed. The Toccata Series designation groups it with other Toccata Series cabinet knob options, which helps when a project calls for consistent styling across base cabinets, wall cabinets, and furniture pieces. The 1-1/4 inch diameter and matching 1-1/4 inch width provide a moderate-sized handhold that suits common residential cabinet doors and drawer fronts. With a 1-1/16 inch projection, the knob stands off the surface enough for fingers to catch the edge while still keeping the profile relatively tight to the face frame or panel. Base dimensions of 9/16 inch concentrate the load onto a smaller footprint, which is helpful when the knob is centered on narrower rails or slimmer drawer faces.
The zinc die cast material defines the underlying construction, so each Berenson zinc die cast knob shares consistent sizing and threading, supporting repeatable installations across multiple cabinets. The specified 8-32 x 1 inch screw size ties directly to that material and design, meaning each mounting point uses the same thread engagement for a uniform feel when tightening knobs on a run of doors. A 1-1/4 inch diameter head offers a predictable layout reference point, which simplifies measuring consistent centerline distances from door edges or drawer top rails. The 1-1/16 inch projection dimension helps installers plan clearance from adjacent hardware or trim, reducing the chance of knobs touching each other on tight reveals. The 9/16 inch base dimension offers a defined seating area that helps locate the knob square to the cabinet surface, supporting cleaner visual alignment from door to door. Being clearly identified as Verona Bronze cabinet hardware, the knob keeps finish selection straightforward when matching other Verona Bronze components in the same room.
The Berenson Toccata Series knob has a 1-1/4 inch diameter, giving a moderate gripping surface suited to typical cabinet doors and drawers.
The knob projection is 1-1/16 inch, so it stands off the cabinet face enough for finger clearance while staying relatively low profile.
The knob is made from zinc die cast material, providing a cast metal body that supports consistent sizing and threading across multiple pieces.
The knob uses an 8-32 x 1 inch screw size, so its internal threading is designed for that standard cabinet knob machine screw.
The base dimensions are 9/16 inch, describing the footprint where the knob meets the cabinet surface and affecting the bearing area on the door or drawer.
The 8256-1VB-P knob has a Verona Bronze finish, giving the cabinet hardware a defined bronze color to coordinate with other Verona Bronze pieces.
The Berenson Toccata Series Verona Bronze 1-1/4 inch diameter knob, part number 8256-1VB-P, combines a defined 1-1/4 inch diameter, 1-1/16 inch projection, and 9/16 inch base with zinc die cast construction and an 8-32 x 1 inch screw interface. Those fixed dimensions and material details let installers plan hole locations, clearances, and finish coordination with confidence when choosing knobs for new cabinets or when replacing older cabinet knobs with a Verona Bronze option from the same Toccata Series.
