Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Toccata Series oil rubbed bronze knob describes a Berenson Toccata Series knob in an oil rubbed bronze finish that sets the visual tone for cabinet fronts and furniture faces, giving projects a consistent decorative hardware style across the run. The 1-1/4 inch diameter face creates a familiar, easy-to-grab pull point that fits comfortably between fingers, which helps with repeatable opening on doors and drawers in daily use. Its round 1-1/4 inch width presents a balanced proportion on standard cabinet rails and stiles, so layouts stay visually even from unit to unit. The knob body is made from zinc die cast material, which provides a solid, uniform shape that supports precise manufacturing and consistent feel when operated many times a day. As part of the Toccata Series from Berenson Corporation, this knob matches that collection's design language, simplifying hardware selection when coordinating multiple pieces.
This 1-1/4 inch diameter knob uses its round face and 9/16 inch base dimension to guide drilling on cabinet doors and drawer fronts, giving installers predictable spacing from panel edges. The 1-1/16 inch projection defines how far the knob stands off the surface, which helps when aligning hardware depth across a whole kitchen or bank of casework. The specified 8-32 x 1 inch screw size indicates the machine thread and overall length intended to engage through typical cabinet front materials, supporting reliable fastening when centered through a drilled hole. With these fixed measurements, layouts can be repeated across units, keeping the Berenson Toccata Series oil rubbed bronze knob consistent row to row.
This Berenson Corporation Toccata Series knob is designed as decorative hardware for cabinets and related woodworking projects, tying directly into the Decorative Hardware & Moldings - Knobs category. The oil rubbed bronze finish places it in a finish family often used on kitchen, bath, and built-in cabinetry, so the knob can visually match other oil rubbed bronze components in the project. With a 1-1/4 inch diameter face, this knob scales well on typical cabinet doors and standard drawer fronts, where that size reads as substantial without dominating narrower rails. The zinc die cast material supports precise shaping of the Toccata profile, so each knob in a run carries the same lines and face details, important when hardware is installed in a tight grid across multiple fronts. By using the same 8257-1ORB-P part on every front in a room, installers maintain a unified look and handle feel from unit to unit. The defined 32 mm diameter also aligns well with common layout habits in shops that work in metric spacing, while still reading clearly as 1-1/4 inch in imperial planning.
The 1-1/4 inch diameter and 1-1/4 inch width provide a circular face that centers easily over a single drilled hole, simplifying jig use and speeding repetitive installs along a bank of cabinets. A 1-1/16 inch projection sets a consistent standoff from the cabinet face, so doors and drawers share the same reach distance along an entire run, which can help keep hardware lines looking straight when viewed from the side. The 9/16 inch base dimension defines the contact ring against the door or drawer surface, giving enough area to seat firmly on finished wood or laminate while remaining compact for narrower frames. The specified 8-32 x 1 inch screw size matches a widely used knob thread, which supports straightforward matching to pre-drilled holes sized for that machine screw diameter. Because this knob belongs to the Toccata Series, its geometry and finish are coordinated with that collection, allowing installers to pair it with other Toccata pieces while maintaining shared proportions. The combination of zinc die cast construction, oil rubbed bronze finish, defined diameter, and standard 8-32 threading helps streamline both layout and fastening during project work.
The Berenson Toccata Series knob has a 1-1/4 inch (32 mm) diameter, a 1-1/4 inch width, a 1-1/16 inch projection, and a 9/16 inch base dimension, which define its size and footprint on cabinet fronts.
The 1-1/16 inch projection establishes how far the knob stands off the door or drawer, giving fingers room to grip while keeping hardware close to the surface for a compact profile.
The 8257-1ORB-P Toccata knob is made from zinc die cast material, providing a solid cast body that supports consistent shaping and a uniform feel across multiple knobs.
This Toccata Series knob uses an 8-32 x 1 inch screw size, which aligns with common cabinet knob threading and length for standard door and drawer front thicknesses.
The oil rubbed bronze finish gives the knob a dark, warm tone that coordinates with other oil rubbed bronze decorative hardware, helping projects maintain a consistent finish theme.
This knob is classified under Decorative Hardware & Moldings in the Knobs product class, identifying it as a decorative cabinet knob for woodworking projects.
The Berenson Toccata Series oil rubbed bronze cabinet knob, part number 8257-1ORB-P, combines a 1-1/4 inch diameter face, 1-1/16 inch projection, and 9/16 inch base to define its working footprint on doors and drawers. Zinc die cast construction and an oil rubbed bronze finish give it a coordinated look and feel suited to decorative cabinet work. For projects that call for a consistent round knob profile with a standard 8-32 x 1 inch screw size and a defined oil rubbed bronze appearance, this Toccata Series knob aligns hardware dimensions and finish across the installation.
Sold In: 1 Each
