Forte Knob 1-11/16 Inch Oil Rubbed Bronze Use

Forte knob 1-11/16 inch oil rubbed bronze describes a Berenson Forte Series cabinet knob designed for furniture and cabinet doors where a round, easy-grip pull is needed. The knob has a 1-11/16 inch diameter, giving fingers a broad contact surface so doors and drawers can be opened with a solid, centered pull. Its zinc die cast construction provides a consistent, rigid shape that supports repeatable alignment across a run of cabinets. The oil rubbed bronze finish presents a dark, traditional look that pairs with classic cabinet styles while visually minimizing fingerprints in normal handling. With a projection of 1-3/4 inch, the knob stands off the cabinet face enough for a full hand grip, which helps on heavier doors. The Berenson Forte collection identity helps match this knob with other Forte pieces when building a coordinated hardware layout.

Key Forte Cabinet Knob Details For Projects

• The 1-11/16 inch diameter head creates a sizable grip point, which helps users pull drawers and doors straight out without twisting.
• A 1-3/4 inch projection sets the knob away from the surface, allowing room for fingers between the knob and cabinet face on thicker door profiles.
• The zinc die cast material delivers a uniform casting, which supports consistent appearance when several knobs are installed in the same line of sight.
• The oil rubbed bronze finish provides a dark, traditional tone, helping this knob visually coordinate with similar bronze hinges or pulls on the same job.
• A 3/4 inch base concentrates contact on the cabinet face, helping create a defined footprint that can visually cover previous knob imprints on many doors.
• The 1-5/8 inch width and diameter figure supports planning for knob spacing on drawer fronts where multiple pulls are laid out across wider faces.

Installation Details For Berenson Forte Cabinet Knob

The Berenson Forte cabinet knob uses an 8-32 screw size, which matches a common cabinet knob thread and simplifies drilling and tapping patterns on new work. With a 1 inch screw length listed, installers can plan hole depth in typical cabinet doors and drawer fronts so the screw engages fully in the knob without bottoming out early. The 3/4 inch base dimension defines the contact circle on the door, which helps when marking center points or aligning knobs to trim profiles. Because the knob is 1-5/8 inch in diameter with 1-3/4 inch projection, installers can check clearance to adjacent walls, appliances, or neighboring doors during layout, reducing the chance of knobs colliding when doors swing or drawers extend.

Using The Forte Series Knob In Cabinet Work

Where The Berenson Forte Knob Fits Best

The Berenson Forte Series oil rubbed bronze knob is suited to cabinet and furniture applications that call for a round pull with a traditional dark finish. Its 1-11/16 inch diameter face works well on both doors and drawers where a single centered knob is preferred, giving users a familiar hand feel. The 1-5/8 inch diameter and width specification allows this knob to sit comfortably on standard kitchen cabinet rails and stiles without overwhelming narrow frames. With a 3/4 inch base, the knob presents a proportionate footprint that works on face frame cabinets as well as frameless panels. The oil rubbed bronze finish from the Forte collection supports projects that repeat this finish across knobs and other hardware so the room carries one consistent hardware color.

Details That Support Consistent Cabinet Results

The zinc die cast material of the Forte knob yields a repeatable shape, which helps maintain uniform sight lines when multiple knobs are installed along upper or lower cabinets. The 1-3/4 inch projection gives installers a fixed stand-off dimension that can be used when planning reveals near countertops, backsplashes, or appliance panels so hardware does not feel crowded. The specified 8-32 screw size and 1 inch length help standardize drilling operations across a project, because the same pilot hole size and screw length can be used for each knob location. The 1-11/16 inch face combined with the 3/4 inch base defines how the knob visually steps down to the cabinet surface, which matters when trying to cover previous knob outlines during remodels. Using the known Forte collection designation also assists in selecting companion Forte pieces to keep knob and pull styling aligned from one room run to the next.

Common Questions About Forte Oil Rubbed Bronze Knob

Selecting This Forte Knob For Cabinet Projects

The Berenson Forte Series oil rubbed bronze 1-11/16 inch diameter knob combines a zinc die cast body, 1-3/4 inch projection, and 3/4 inch base to support practical cabinet layouts. Using the defined 8-32 screw size and 1 inch screw length, installers can plan consistent hole preparation across doors and drawers. For projects calling for a dark, traditional round pull that matches the Forte collection, this knob offers known dimensions and finish to build into cabinet drawings and room hardware schedules.