
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Standard duty shelf brackets without flange from Reeve Store Equipment Company provide support for shelving using the RV41 bracket design. The RV41 model is typically used with RV20 and RV40 series standards, so it works within that standard-and-bracket system on storage runs. This specific Reeve 41-8-BT brass 8 foot bracket is made from 0.080 inch thick tempered steel, giving the bracket a stable, rigid structure under normal loading. The bracket has a shelf lip at the end with no flange, so shelving rests against the lip while the top stays clear of extra material. Brackets are designed with stabilizers to reduce sway, which helps shelving track straight along the standard when loaded. RV41 has two engagement teeth, so it locks into the RV20 and RV40 standards at two points for a more secure engagement in service.
The Reeve 41-8-BT bracket is part of the RV41 model line, which is typically used with RV20 and RV40 series standards, so the engagement teeth are shaped for that standard profile. RV41 has two engagement teeth that drop into the matching slots on RV20 and RV40 standards, giving a two-point contact that helps resist pull-out under load. The bracket uses stabilizers along its body, so once it is seated in the standard it resists side-to-side movement, which keeps shelf rows running straight. The shelf lip at the end of the bracket supports the front edge of the shelving, so the board seats consistently along the run. The 0.080 inch thick tempered steel section keeps the bracket profile relatively slim while still supporting standard duty shelving loads in the rated range.
The Reeve 41-8-BT standard duty shelf bracket without flange fits into the RV41 family, which is typically used with RV20 and RV40 series standards, so it works wherever those standards are part of the wall layout. With available lengths from 4 through 20 inches, the RV41 line can handle shallow shelves for light storage up through deeper shelves for bulkier items, all within the 130-350 pounds per pair weight rating based on length. The 8 foot brass variant listed under SAP description "SHELF BRKT, BRASS-8'" provides a brass-tone appearance suited to installations that call for Brasstone finish, while the same design is also available in Brillatone zinc to match lighter metal schemes. Because the bracket uses a shelf lip at the end with no flange, shelves sit flat against the bracket face while the lip helps position the front edge, supporting wood, laminate, or metal shelving surfaces in line with the standards. Stabilizers built into the bracket reduce sway along the standard, which is especially useful on tall wall runs where multiple brackets carry a continuous shelf.
The RV41 bracket design uses 0.080 inch thick tempered steel, giving enough section strength for the stated 130-350 pounds per pair capacity range, so installers can select a length that meets the loading for each shelf span. Two engagement teeth tie the bracket into the RV20 and RV40 standards, distributing the load into the standard at two points rather than one, which supports more consistent performance across loaded bays. The presence of stabilizers helps the bracket resist twisting or racking when shelves are bumped, so alignment along a run stays more uniform over time. The shelf lip at the end of the bracket provides a defined front support line without a flange wrapping over the top, which keeps the shelf top clear for materials that need a smooth upper surface. Available finishes in Brasstone and Brillatone zinc allow the bracket appearance to match the selected standards, so the finished installation looks uniform across all levels.
The RV41 shelf brackets are typically used with RV20 and RV40 series standards, so they are suited to storage runs built around those matching Reeve standards.
The Reeve 41-8-BT shelf bracket is made from 0.080 inch thick tempered steel, giving the bracket a solid, rigid section for supporting standard-duty shelf loads.
The standard duty RV41 shelf brackets have a weight rating of 130-350 pounds per pair, based on length, so loading is matched to the chosen bracket depth.
The shelf lip at the end without a flange supports the front edge of the shelf while keeping the top surface clear, so shelving sits flush on the bracket.
The RV41 bracket uses stabilizers to reduce sway and two engagement teeth for dual contact in the standard, helping maintain alignment under load.
The RV41 series is available in Brasstone and Brillatone zinc finishes and in lengths from 4 to 20 inches, so shelf depth and appearance can be matched.
The Reeve 41-8-BT standard duty shelf bracket without flange combines 0.080 inch thick tempered steel, a shelf lip, stabilizers, and two engagement teeth to support shelving on RV20 and RV40 standards. With a weight rating of 130-350 pounds per pair based on length and finish choices in Brasstone and Brillatone zinc, the RV41 line lets you match depth, capacity range, and appearance to your storage layout. For a brass 8 foot solution within the Reeve RV41 system, this model aligns with the RV20 and RV40 standards and the available length and finish structure of the series.