Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
5/8" Non-Swivel Leveling Glide from DH Casters is an economy leveling glide that supports standard duty applications, so it suits everyday work surfaces and tables in shops or commercial environments. The glide has a floor base diameter of 7/8 inch, which spreads the load over a defined footprint and helps stabilize furniture legs on typical hard floors. The stem uses a 1/4-20 thread, providing a familiar machine-thread interface that matches many furniture leg inserts and metal leg designs. The overall stem length is 1 inch, giving adjustment travel for leveling while keeping the foot profile compact under the leg. As a non-swivel design, the glide does not pivot at the stem, which keeps the base firmly oriented during height adjustments and helps maintain consistent contact with flat floors.
This DH Casters furniture glide uses a 1/4-20 threaded stem, which ties into common machine-thread tapped holes or inserts found in many work surface and table legs. The 1 inch stem length allows installers to dial in leg height across multiple corners, so a bank of tables or a long workbench can be brought into level alignment over uneven floors. The 7/8 inch base diameter defines the visible footprint under each leg, which matters when aligning legs to existing floor markings or narrow bases. Because the economy leveling glides are non-swivel, rotation occurs at the thread interface during adjustment while the base stays aligned to the leg, helping maintain a clean visual line under cabinets or tables.
This furniture glide sits in the Work Surface & Tables category and the T-Nuts and Glides grouping, so it suits furniture pieces that rely on threaded legs or inserts for height control. The 1/4-20 stem specification matches many commercial table legs and fixtures that accept machine-thread glides, letting the installer use a consistent thread size across multiple units. With its 7/8 inch floor base diameter, the glide fits under compact leg profiles while still giving a clear bearing area, which is useful on narrow metal legs or square tube frames. The product is classed as a Furniture Glide, so it plays the role of a height-adjustable foot rather than a caster, keeping the furniture stationary once set. An optional metal insert bushing is designed to fit 1 inch square leg bases, which allows this glide to be paired with square tube legs when that bushing is used in the leg structure. This combination creates a defined interface between glide stem and leg base, supporting repeatable installation across matching legs.
The non-swivel construction means the glides do not swivel from the stem, so the base remains oriented and flush to the leg as the stem turns within the threaded insert, which helps keep each leg seated solidly after leveling. In practice, this behavior lets installers walk around a work surface, adjust each corner by the stem, and retain stable foot contact with flat floors without a joint that pivots under load. The 1 inch stem length and 1/4-20 thread pitch together provide fine vertical adjustment steps, so small turns at the stem translate into controlled changes in height at each leg. Over a run of connected tables, this control helps bring tops into a common plane. The economy leveling glides description signals a value-driven option that still delivers standard duty support, which is important in environments with many identical stations or fixtures. The ability to pair the glide with an optional metal insert bushing for 1 inch square leg bases also streamlines leg design, because one glide specification can serve multiple square-leg assemblies that share that bushing.
The ADJC-7814 part is a 5/8" Non-Swivel Leveling Glide classified as a Furniture Glide, so it functions as an adjustable foot for work surfaces and tables rather than a rolling caster.
The glide uses a 1/4-20 threaded stem, so it threads into compatible machine-thread holes or inserts in furniture legs, creating a secure, adjustable connection for leveling.
The 7/8 inch floor base diameter sets the contact area on the floor, which spreads the load under each leg and contributes to stable support on typical hard surfaces.
The non-swivel design keeps the glide from pivoting at the stem, so height changes occur through the threads while the foot stays oriented, helping maintain steady floor contact.
The 1 inch stem length provides adjustment travel to compensate for minor floor variations, so installers can bring all legs of a work surface to a consistent height.
The optional metal insert bushing is designed to fit 1 inch square leg bases, creating a receiving point so this glide can be used with square tube leg designs.
The 5/8" Non-Swivel Leveling Glide from DH Casters combines a 1/4-20 threaded, 1 inch long stem with a 7/8 inch floor base diameter, giving a straightforward way to level standard duty work surfaces and tables. When paired with the optional metal insert bushing for 1 inch square leg bases, this single glide specification can serve multiple square-leg projects that share that leg format. For projects built around threaded legs or inserts, this furniture glide offers an economy leveling glides solution that aligns with everyday shop, office, and commercial work surface needs.
Sold In: 1 Each