Cove Moldings Dentil Style, 8' Unfinished Cherry

Cove Moldings Dentil Style For Cherry Projects

Cove Moldings Dentil Style 8' Unfinished Cherry describes a Pro Value Series machine made dentil molding that is 3/4 inch wide and 1/2 inch thick, so you get a consistent cherry profile ready to match cabinet or trim layouts that call for that size. The molding is 96 inches long, giving a full 8 foot run that works well along cabinet tops, shelving faces, or room transitions without short splices. All moldings have a 1/4 inch gap between the up raised teeth, which sets a regular dentil rhythm that stays even across multiple sticks on longer jobs. The unfinished cherry wood lets you stain or clear coat to align with existing cherry components or other finishes on site. As part of the Pro Value Series, this dentil molding supplies an economy-minded option while keeping the key dimensions and cherry material consistent from piece to piece.

Key Dentil Cherry Molding Details For Projects

• The dentil molding is 3/4 inch wide and 1/2 inch thick, giving a compact profile that fits well on cabinet crowns, face frames, or light rail details where space is tight but a visible decorative edge is needed.
• Each molding stick is 96 inches long, so one length can span most standard cabinet runs or wall sections, which reduces the number of joints that need aligning and sanding during installation.
• All moldings have a 1/4 inch gap between the up raised teeth, creating an even dentil spacing that carries cleanly across multiple pieces and helps layouts stay visually consistent around corners.
• The product is made from unfinished cherry wood, allowing sanding, staining, and topcoating on site so the molding can blend with existing cherry doors, frames, or furniture-grade work.
• The Pro Value Series designation marks this as an economy line of machine made dentil moldings, helping control material costs while keeping a uniform machined pattern over the full length.

Cherry Dentil Molding Fit And Layout Details

The Pro Value Series crown moldings are machine made dentil moldings that measure 3/4 inch wide by 1/2 inch thick, so installers can plan reveals and step-backs around that fixed footprint when building out crown assemblies. Because each piece is 96 inches long, the molding can bridge standard cabinet banks or wall segments with fewer seams, which simplifies layout around corners or over appliance gaps. The 1/4 inch gap between the up raised teeth defines the visual pacing of the dentil pattern, which helps when setting starting points at a centerline or inside corner. Working in unfinished cherry allows cutting, profiling edges if desired, and finishing after fitting, so the molding can be tuned on site to match shop-sprayed or field-finished cherry components.

Using Pro Value Series Cherry Dentil Molding

Where This Unfinished Cherry Molding Works

The Web Description identifies these Pro Value Series parts as crown moldings in an economy line of machine made dentil moldings, so they suit crown-style details on cabinets, built-ins, or room trim where a dentil profile is specified. With a 3/4 inch width and 1/2 inch thickness, the molding can sit above upper cabinets or along a face frame edge without overpowering smaller sections, which is useful on standard kitchen runs or office casework. The 96 inch length supports continuous runs across typical wall spans, while the 1/4 inch gap between the up raised teeth keeps the dentil pattern legible even on longer straight sections. Because the product is unfinished cherry, it fits projects using cherry doors, panels, or trim where the molding must carry the same species through corners, returns, or stacked molding build-ups.

Details That Support Consistent Dentil Results

The description notes that these are machine made dentil moldings, which means the 3/4 inch width, 1/2 inch thickness, and 1/4 inch gap between teeth repeat along each 96 inch length, helping installers cut multiple pieces with predictable pattern alignment. That regular tooth and gap spacing lets you plan cuts so the up raised teeth land cleanly at cabinet ends, pilasters, or focal points instead of breaking awkwardly mid-gap. The unfinished cherry construction gives flexibility to sand end grain, ease edges, and then stain or clear coat, so cut joints and returns visually merge with factory faces once finished. As part of the Pro Value Series, the economy line positioning can help outfit longer runs of cabinetry, shelving, or trim with matching dentil detail, keeping the same cherry species and machined profile across the full installation. The manufacturer part number M83822CUF2 and the SAP description DENTIL MLD 3/4'-CHERRY identify this exact 3/4 inch cherry dentil molding, which helps specifiers and shops call out the same profile whenever additional lengths are required.

Common Questions About This Cherry Dentil Molding

Select This Cherry Dentil Molding For Your Run

The Pro Value Series cove moldings dentil style, 8 foot unfinished cherry profile offers a machine made 3/4 inch wide by 1/2 inch thick cherry molding with a 1/4 inch gap between up raised teeth, giving you a defined dentil pattern along a full 96 inch length. For runs where cherry species, compact crown dimensions, and repeatable dentil spacing matter, this dentil molding provides a consistent profile that matches the DENTIL MLD 3/4'-CHERRY specification and supports straightforward layout across residential or commercial woodworking projects.