
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPWLS-30 to RSWLS-30.
Omega National 30 inch pie cut lazy susan gives a corner cabinet a one shelf rotating storage surface, so large items are easier to reach without pulling stock from the front of the opening. The shelf is constructed of hard maple and birch wood, which provides a solid wood platform for everyday kitchen loads in a typical cabinet environment. A solid maple rim is built around the shelf, so stored items are contained on all sides instead of sliding off the edge during rotation. The rim is 6 inches deep and forms a lip or bin, so tall or bulky items stay seated on the shelf while it turns. Bore and dowel butt joints are used in the rim construction, tying the maple pieces together as a solid frame that supports the shelf edge during regular use.
The shelf is designed for fixed shelf application, so it is intended to be mounted where the support level inside the cabinet does not move once positioned. The shelf is pre-mounted on patented die cast aluminum bearings, so the rotation mechanism is already attached to the wood when installers set the assembly on its support. This bearing setup provides ultra smooth movement, so the shelf rotates easily when loaded in typical kitchen use. The 30 inch diameter defines the footprint required in the corner cabinet, so installers can plan clearances around doors and face frames using that round dimension. The one shelf format gives a single rotating level, so layout focuses on a straightforward mounting height inside the corner space.
The Omega National 30 inch pie cut lazy susan shelf is identified as a corner solution shelf, so its role is to turn a hard-to-reach corner cabinet area into an accessible rotating surface. The one shelf configuration concentrates storage on a single level, so tall items can stand upright on the 30 inch diameter platform. The hard maple and birch wood construction suits typical kitchen cabinet interiors, so the rotating shelf matches wood-based casework visually and structurally. The 6 inch deep lip or bin around the perimeter makes the shelf well suited to holding large containers, so items such as bulk goods or tall bottles remain supported by both the base and the rim. The solid maple rim around the edge defines a raised boundary, so stored pieces are guided as the shelf turns within the corner opening.
The shelf is pre-mounted on patented die cast aluminum bearings, so rotational hardware is already integrated and the shelf turns on a defined center point once installed. These bearings are described as providing ultra smooth movement, so users experience an easy, controlled rotation rather than resistance or catching. The shelf carries a 360 lb weight capacity, so the structure and bearing system are rated to hold substantial distributed loads in service. This rating supports storage of heavier kitchen items on the 30 inch diameter surface, so the lazy susan can serve as a primary storage zone in the corner cabinet. Shelves are protected with a pre-catalyzed UV-cured clear coat finish, so the wood faces have a hardened protective layer that stands up to typical cabinet interior conditions over time. The combination of solid maple rim, bore and dowel butt joints, and die cast aluminum bearings creates a unified rotating assembly, so installers work with a single engineered unit when setting up the corner solution.
The Omega National 30 inch pie cut lazy susan has a 30 inch diameter shelf, so corner cabinet planning and clearances can be based on that round footprint.
The shelf features a 6 inch deep lip or bin formed by the solid maple rim, so tall and bulky items are contained during rotation inside the cabinet.
The lazy susan shelf uses hard maple and birch wood with a solid maple rim, so the rotating platform matches wood cabinet construction and supports everyday kitchen loads.
The shelf is pre-mounted on patented die cast aluminum bearings that provide ultra smooth movement, so the lazy susan rotates easily under normal storage loads.
The Omega National shelf has a 360 lb weight capacity, so it can support substantial distributed loads when used as a primary corner storage surface.
The shelf is designed for fixed shelf application, so it is used where the cabinet interior provides a stable, non-adjustable level for the rotating unit.
The Omega National 30 inch pie cut lazy susan shelf combines hard maple and birch construction, a 6 inch deep maple rim, and a 30 inch diameter platform, so a corner cabinet gains a defined rotating storage level. The pre-mounted patented die cast aluminum bearings supply ultra smooth movement, so the shelf turns easily under its 360 lb weight capacity in everyday use. For projects calling for a one shelf, fixed shelf application corner solution, the T8530K30TR6DCBMNL1 model provides a single integrated unit sized for a standard kitchen corner footprint.
Sold In: 1 Each