
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf wall cabinet organizer brings pull-out access to narrow wall cabinet storage with a fully assembled maple frame, soft-close slides, and a perforated stainless steel panel. This wall cabinet pull-out is part of the Rev-A-Shelf 444 maple wall organizer line and is designed for wall cabinetry organizers and fillers where organized access matters. The rev a shelf design includes adjustable door mount brackets, bottom mounted tri-slides, and rubberized black hooks and pegs for flexible storage. The magnetic stainless steel panel organizer surface allows customized placement of accessories, and some buyers may also use the panel like a marker board or dry erase board surface if that use fits their application. Verified product dimensions are 5 inches wide and 26-1/4 inches high.
Key specs to confirm: This Rev-A-Shelf 444 maple wall organizer is listed at 5 inches wide and 26-1/4 inches high. Buyers should confirm cabinet opening width, interior cabinet height, depth clearance, door connection points, and face frame conditions before ordering. The included door mount brackets allow up to 5 inches of adjustment, and the package includes rub bushings for 1-1/2 inch or 1-3/4 inch face frames. The wall cabinet pull-out uses soft-close slides and patented bottom mounted tri-slides, with a verified 100 lb load capacity. If you need additional dimensional details, mounting hole locations, or any compliance information, confirm those items with the manufacturer or technical documentation before installation.
What's included: The organizer comes fully assembled with perforated stainless steel panels, adjustable door mount brackets, rub bushings for 1-1/2 inch or 1-3/4 inch face frames, and a variety of rubberized black hooks and pegs.
What to verify before ordering: Confirm your cabinet opening can accept a 5 inch wide organizer, verify the 26-1/4 inch height fits your wall cabinet, check that your door style works with the adjustable brackets, and review face frame thickness so the supplied bushings match your cabinet construction.
A wall cabinet pull-out like this is useful when a narrow wall cabinet becomes hard to organize with fixed shelves. Installers often run into cabinets where small items get stacked behind each other, making access slow and inconsistent. The Rev-A-Shelf 444 maple wall organizer addresses that problem by bringing the stored contents out of the cabinet instead of forcing the user to reach into a tight opening.
This soft-close wall organizer is a practical fit for kitchens, utility areas, and other cabinet runs where a slim organizer can improve access to small packaged goods, wraps, bottles, or frequently used items. The fully assembled format can help speed installation for trade professionals and serious DIY buyers who want fewer loose parts to manage. The adjustable door mount brackets allow up to 5 inches of adjustment, which helps when aligning the pull-out to different door styles. That flexibility matters on remodel jobs where cabinet conditions may vary from one opening to the next.
The perforated stainless steel panel is one of the more useful verified details on this Rev-A-Shelf wall cabinet organizer. Because the panel is magnetic and perforated, buyers can customize storage with the included rubberized black hooks and pegs. For buyers searching rev a shelf or revashelf organizers with a marker board or dry erase board style panel in mind, it is important to note the verified feature is a magnetic perforated stainless steel panel intended for customizable storage. If a buyer plans to write directly on the panel, that specific use should be confirmed with the manufacturer.
Stability is another key use-case factor. Rev-A-Shelf states that the patented bottom mounted tri-slides prevent side-to-side motion and provide complete stability when pulled out of the cabinet. In daily use, that can help the organizer feel more controlled when loaded. The verified 100 lb load capacity also gives buyers a concrete reference point for storage planning. Even with that rating, buyers should still confirm cabinet construction, mounting conditions, and intended contents before installation.
When comparing wall cabinetry organizers and fillers, buyers usually look at access, adjustability, and installation time. This Rev-A-Shelf wall cabinet pull-out offers a clear combination of verified details: a fully assembled organizer, soft-close slides, a maple frame, a magnetic perforated stainless steel panel, and adjustable door mount brackets. That mix supports buyers who want a ready-to-install organizer that can be configured after install with hooks and pegs.
Some wall organizers focus mainly on shelf storage. Others offer a pull-out frame but limited customization. This magnetic stainless steel panel organizer stands out in a practical way because the panel allows repositioning of accessories as storage needs change. That can be useful in a working kitchen where the contents of a narrow cabinet may shift over time.
The tri-slide design is also relevant in generic comparison. A wall cabinet pull-out that minimizes side-to-side motion can be easier to use in narrow openings, especially when the organizer is door-mounted and pulled often. The included rub bushings for 1-1/2 inch or 1-3/4 inch face frames provide another concrete fit detail that buyers can compare against their cabinet construction. Rather than relying on broad claims, this Rev-A-Shelf 444 maple wall organizer gives buyers several verified checkpoints they can use to judge fit, install effort, and day-to-day usability.
This wall cabinet pull-out fits only where cabinet opening size, interior height, depth, and door mounting conditions match the product requirements. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf organizer is listed at 5 inches wide and 26-1/4 inches high.
The Rev-A-Shelf wall cabinet organizer comes fully assembled, which can reduce installation time.
The organizer includes adjustable door mount brackets with up to 5 inches of adjustment for different door styles.
This Rev-A-Shelf wall organizer includes rub bushings for 1-1/2 inch or 1-3/4 inch face frames.
The wall cabinet organizer uses patented bottom mounted tri-slides that prevent side-to-side motion and provide stability when pulled out.
The magnetic stainless steel panel organizer includes perforated stainless steel panels, adjustable door mount brackets, rub bushings, and rubberized black hooks and pegs.
The Rev-A-Shelf 444 organizer is rated at 100 lb load capacity.
The verified feature is a magnetic perforated stainless steel panel for customizable storage. Marker board or dry erase board use should be confirmed with the manufacturer before purchase.
This rev a shelf organizer should be checked for opening width, cabinet height, face frame size, door bracket alignment, and any unlisted depth or mounting details. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf wall cabinet organizer is a practical choice when you need a narrow wall cabinet pull-out with a fully assembled maple frame, soft-close slides, and a magnetic perforated stainless steel panel. Before purchase, confirm your cabinet opening, interior height, face frame size, and door mounting conditions. Included components are verified to include adjustable door mount brackets, rub bushings, and rubberized black hooks and pegs. If you need exact depth, mounting dimensions, or other technical details, confirm those points before ordering.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 6 Each | RS434PEG6-6 Mfr# 434-PEG6-6 | Rev-A-Shelf 434 Series 6" W Black with, - 434-PEG6-6 |