Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV766 wall mount flange is a Knape and Vogt flange designed for 1-5/16 inch tubing, so it supports standard round closet rods in wardrobe and storage runs. The round bore sized for 1-5/16 inch tubing seats the rod firmly, which helps keep rods from shifting under normal use. This wall mount flange belongs to the Closet Rods and Flanges product class, so it functions as the fixed support point at the end of a rod span. The chrome finish on the flange presents a clean, bright appearance, which suits open closet layouts where hardware remains visible. Because this flange is described under closet tubing and flanges, it fits typical shelf, closet, and garage organization layouts that rely on 1-5/16 inch rod. The Knape and Vogt brand identification ties it into a known line of closet hardware, which helps match this flange to other KV components in the same project.
This wall mount flange uses two holes on 2-1/4 inch centers, which establishes a predictable footprint when fastening it to wall framing or a cabinet gable. The fixed 2-1/4 inch spacing lets installers transfer measurements from one location to another, which supports symmetrical closet layouts and mirrored rod runs. One hole set 90 degrees from the other changes the direction of the fasteners, which helps the flange resist twisting forces as the rod is loaded or pushed sideways. Because the flange is defined as wall mount for 1-5/16 inch tubing, it works at the termination of closet rods where they meet walls, panels, or vertical supports. The chrome finish pairs well where rods or other exposed hardware are also chrome, which keeps the visible end supports consistent in built-in closets and storage systems.
The 766 CHR part number identifies this component as a Knape and Vogt wall mount flange, which positions it within their system of closet tubing parts. Its sizing for 1-5/16 inch tubing points it directly at standard round closet rods, which are widely used in bedroom closets, hall storage, and light-duty garment areas. Because it is categorized under shelf, closet, and garage organization with closet tubing and flanges, it suits storage layouts where continuous rods tie into shelving or support panels. The chrome finish makes the flange particularly appropriate where exposed hardware is visible beneath open shelving, which keeps the support points visually aligned with other chrome-finished components across the closet or garage wall.
The two-hole layout on 2-1/4 inch centers gives installers a known pattern for drilling, which speeds repeated installations when setting multiple rods in a walk-in closet or bank of reach-in closets. This fixed spacing supports the use of simple drilling jigs, which helps maintain consistent vertical and horizontal alignment from opening to opening. The presence of one hole at 90 degrees to the other means fasteners engage material in different directions, which improves the flange's ability to hold position as the closet rod carries day-to-day garment loads. The chrome finish provides a hard, smooth surface around the rod contact area, which helps the flange maintain appearance as hangers slide near the rod ends. Because the flange is designed specifically for 1-5/16 inch tubing, it centers that rod diameter accurately, which supports straight hanging lines when rods span between two matched wall mount flanges.
The KV766 wall mount flange is designed for 1-5/16 inch tubing, which targets standard round closet rod used in many wardrobe and storage layouts.
The flange uses two holes on 2-1/4 inch centers, which creates a consistent footprint so installers can repeat drilling patterns across multiple closet or storage openings.
The 766 CHR flange places one hole at 90 degrees to the other, which helps resist twisting forces on the flange as the closet rod is loaded from different directions.
The Knape and Vogt 766 CHR flange has a chrome finish, which visually coordinates with chrome closet rods and other chrome closet hardware.
This flange is classified under Closet Rods and Flanges and closet tubing and flanges, so it serves as an end support for 1-5/16 inch closet rods.
The KV766 flange is used in shelf, closet, and garage organization projects wherever 1-5/16 inch closet tubing needs a wall-mounted support at the rod end.
The KV766 wall mount flange for 1-5/16 inch tubing combines a defined two-hole, 2-1/4 inch on-center pattern with one hole at 90 degrees, which supports stable mounting. The chrome finish and Knape and Vogt 766 CHR identification align it with closet tubing projects where matching 1-5/16 inch rods and coordinated chrome hardware are already specified.
Sold In: 1 Each
