Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt oval closet rod flange gives you a dedicated mounting point for oval closet tubing in shelf, closet, and garage organization layouts. This 1-1/8 inch diameter oval closet rod flange is built for 1-1/8 inch by 5/8 inch oval tubing, so it directly matches common oval rod stock where that exact profile is required for a tight, stable fit. The chrome finish presents a clean, bright surface that visually matches chrome oval rods in open or walk-in closets, helping the hardware disappear into the overall run. As part of the closet rods and flanges class, this flange supplies the fixed bearing surface that carries the load of hanging garments on an oval closet rod, turning raw tubing into a usable closet bar. The Knape and Vogt brand identity behind this 881 CHR part number gives installers a clearly defined component when specifying jobs or reordering for repeat layouts across multiple closets.
This 1-1/8 inch diameter oval closet rod flange is sized for 1-1/8 inch by 5/8 inch oval tubing, so the interior cradle matches that exact stock and supports the tube along its long axis for better load transfer. The piece is designed with one hole that carries the main fastener, giving you a single, definite drilling point at each flange location. Two 5 mm pins are integrated for 32 mm systems, so the flange keys into line-bored 5 mm holes on 32 mm centers, using the panel system to carry shear forces. The chrome finish on the Knape and Vogt 881 CHR flange presents a uniform surface around the rod seat, so the transition from flange to tubing feels continuous when rods are rotated or minor adjustments are made during final fitup.
This oval flange sits in the closet tubing and flanges category, purpose-built for 1-1/8 inch by 5/8 inch oval tubing such as the KV880 Series. That defined tubing size positions it for reach-in and walk-in closets where oval rod is specified instead of round bar, especially in systems that use 32 mm line boring. In that layout, the two 5 mm pins settle directly into the 32 mm system holes, so the flange self-registers at a fixed elevation along side panels or partitions. That pin engagement helps hold the flange against vertical shear when the closet rod carries hanging weight, letting the main fastener focus on clamping and preventing pullout. Because the chrome finish visually pairs with chrome oval rods, this flange works neatly in open shelf and wardrobe runs, presenting a consistent surface from support to support.
The defined 1-1/8 inch by 5/8 inch oval tubing interface on the 881 CHR flange means the rod nests into a closely matched pocket, which helps distribute load along the rod wall and can limit point stress at the bearing area. For installers working across multiple closets, that exact tubing callout simplifies ordering, since the same oval rod profile can be used with each flange location. The single mounting hole keeps layout straightforward, so repeated drilling across a bank of cabinets uses the same reference without shifting patterns. At the same time, the two 5 mm pins sized for 32 mm systems act as physical locators in line-bored panels, so each flange drops to the same centerline, maintaining rod height consistency between bays. The chrome finish on the Knape and Vogt oval closet rod flange provides a bright interface under the rod, and that continuity from flange to flange helps final installations read as one continuous system rather than a mix of components.
The Knape and Vogt 881 CHR oval flange is for use with KV880 Series or other 1-1/8 inch by 5/8 inch oval tubing, so it matches that specific oval profile along the full support area.
The 1-1/8 inch by 5/8 inch oval tubing size gives a flattened profile in the flange, which helps present a stable surface for hangers and can feel more substantial than smaller-diameter round rods.
The two 5 mm pins on the oval flange are for use in 32 mm systems, so they locate in 5 mm line-bored holes and help keep rod height and alignment consistent across panels.
The oval flange is designed with one hole for extra mounting strength focused at a central point, which simplifies drilling patterns while still providing a solid anchor location for the closet rod support.
The chrome finish on the 1-1/8 inch oval closet rod flange visually matches chrome oval tubing, helping closet runs look uniform from support to support in open storage areas.
This Knape and Vogt closet rod flange carries manufacturer part number 881 CHR, giving designers and installers a clear reference when drafting lists or repeating a known closet layout.
The Knape and Vogt 1-1/8 inch diameter oval closet rod flange in chrome ties directly to 1-1/8 inch by 5/8 inch oval tubing and 32 mm systems, giving you defined geometry for repeatable layouts. When planning closet tubing and flanges on your next project, using this 881 CHR oval flange with matching KV880 Series or other 1-1/8 inch by 5/8 inch oval tubing keeps rod support, alignment, and appearance consistent from bay to bay.
Sold In: 1 Each
