Festool Clamping Element For Precise Workholding

Festool clamping element gives a solid way to hold work in place for sawing, sanding, routing, and drilling operations, so the piece stays steady while tools do their job. This clamping element is designed for use with the Festool MFT/3 Multifunction Table, MFT/3-Kapex Multifunction Table, and MFT/3 Multifunction Table Basic, so it ties directly into common workshop setups built around those tables. The design supports safe and exact fixing of work, which helps keep cuts, edges, and holes consistent from piece to piece. By providing controlled pressure at the workpiece, the clamping element helps limit movement that can throw off layout lines or cause tool chatter. This part is identified as Manufacturer Part # 488030, which helps match it accurately to Festool documentation and workshop planning using that specific clamping system.

Key Clamping Details That Support Workflow

• The Festool brand ties this clamping element into the broader Festool system, which helps installers and woodworkers keep workholding consistent across MFT/3-based stations.
• The design is meant for safe and exact fixing of work, which supports more repeatable cuts, cleaner routed edges, and more accurate drilling when tasks repeat during a project.
• Use during sawing, sanding, routing, and drilling operations keeps the same clamping habit across different tools, which can streamline how parts are staged and processed.
• Compatibility with the MFT/3 Multifunction Table, MFT/3-Kapex Multifunction Table, and MFT/3 Multifunction Table Basic lets the same clamping approach carry across those specific benches.
• Dog hole use at 20 mm diameter connects the clamping element to the MFT grid, which supports predictable positioning and alignment on the table surface.

Clamping Setup On Festool MFT Style Tables

This clamping element works with the 20 mm dog hole pattern in the Festool MFT/3 Multifunction Table family, so it nests directly into the grid that many shops already rely on for layout. By using the grid hole pattern, the clamping element fixes pieces without breaking up the work surface, which is valuable when long or wide panels have to move smoothly past blades, bits, or abrasives. The element is described as suitable for clamping material from the edges or sides, so it can hold parts without blocking the main face where tools contact the workpiece. This side and edge clamping capability supports more control when trimming edges, sanding faces, or routing profiles along the perimeter.

Using Festool Clamping Elements In Real Projects

Where This Festool Clamping Element Fits Best

This Festool clamping element is intended for the Festool MFT/3 Multifunction Table, MFT/3-Kapex Multifunction Table, and MFT/3 Multifunction Table Basic, so it lives naturally in shops built around those benches. The 20 mm dog hole diameter matches the MFT grid, so the element drops into the pattern and locks work in locations that line up with fences, guides, or tool paths set on the table. Because it can clamp from the edges or sides, it works well when the main face of the material has to stay clear for sanding pads, saw blades, or router bases that travel across the surface. The design also works with square, round, or irregular shaped material, so it can support case parts, panels, and more awkward offcuts or templates that still need accurate machining.

Why These Clamping Details Support Accuracy

The ability to use the grid hole pattern for clamping keeps the work surface uninterrupted, which matters when full panels must slide or when routing and sanding need smooth travel past the clamping points. When material is held from edges or sides, cutting and drilling operations can run across the main face with fewer obstructions, which helps maintain steady feed pressure and more controlled tool movement. The 20 mm dog hole interface ties the clamping point to known reference spacing, which supports repeat positioning of workpieces across multiple identical parts. Since the element is suited to square, round, or irregular shaped material, it helps bring the same stable holding to a wide range of job pieces, from frame parts to templates and jigs that still require accurate drilling, routing, or sanding work.

Common Questions About Festool Clamping Element 488030

Select Festool Clamping Elements For MFT Work

The Festool clamping element identified as part number 488030 is built to work with the MFT/3 Multifunction Table family and its 20 mm dog hole grid, so it fits directly into those benches. Using this element for sawing, sanding, routing, and drilling lets shops rely on one consistent workholding approach across multiple operations. For projects staged around MFT/3, MFT/3-Kapex, or MFT/3 Basic tables, this clamping element supports stable, repeatable positioning of square, round, and irregular shaped materials.