Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Deco Series satin nickel knob describes a zinc die cast knob from the Deco collection that delivers a consistent look wherever that series is already in use. The 1 inch diameter head provides a defined gripping surface, giving fingers a clear purchase when opening cabinet doors or drawers. A 7/8 inch projection spaces the knob away from the front, so hands pull against the knob rather than the cabinet face, helping reduce fingerprints on finished surfaces. The satin nickel finish diffuses light rather than reflecting it sharply, which helps this knob blend into satin nickel hinge and pull layouts on the same run of cabinets. The 1 inch width and 15/16 inch base diameter create a compact footprint, supporting layout on smaller drawer fronts where space between knobs matters.
This Deco Series satin nickel knob uses an 8-32 thread size, which sets the screw interface that engages the knob body during installation. The 1 inch diameter head works well on typical cabinet doors and standard-width drawers, giving enough surface to grab without crowding neighboring hardware. With a 7/8 inch projection, the working depth of the knob is defined, helping installers align it in relation to door edges and drawer rails for a consistent reveal from piece to piece. The 15/16 inch base diameter transitions the knob to the door or drawer surface, guiding where to position the center point when laying out rows or grids of knobs.
The P3102-SN satin nickel knob belongs to the Deco collection, setting it up for use wherever that profile is already specified on cabinets. The 1 inch diameter and compact 1 inch width allow it to fit comfortably on both upper doors and smaller drawers, supporting consistent hardware selection across a full run of kitchen or bath cabinets. A 7/8 inch projection maintains a modest stand-off from the cabinet face, which works well when doors may open near walls or appliances by limiting how far the knob extends into adjacent space. The satin nickel finish ties into satin nickel hinges and pulls, supporting a continuous finish theme in residential or light commercial millwork where that color tone is required.
The defined 1 inch diameter gives installers a clear reference when centering the knob on door stiles or drawer fronts, helping repeat placements from cabinet to cabinet. The 15/16 inch base diameter establishes how much surface area rests on the face, guiding spacing decisions when multiple knobs are used on wider drawers. With a 7/8 inch projection, the pull depth is predetermined, so layout jigs can be set once to maintain the same functional reach across an entire job. The zinc die cast material supports consistent thread engagement at the 8-32 interface, which helps each knob seat the same way when tightened during final hardware installation.
The Hickory Hardware Deco Series satin nickel knob has a 1 inch diameter head, which defines the gripping area and helps plan spacing on cabinet doors and drawers.
The P3102-SN cabinet knob has a 7/8 inch projection, so the working face of the knob stands slightly off the cabinet surface to give fingers pulling clearance.
This Hickory Hardware Deco Series knob is zinc die cast, establishing a uniform base material that supports a consistent feel across multiple installed knobs.
The Belwith Keeler Deco cabinet knob has a satin nickel finish, which provides a muted metallic look that pairs with other satin nickel decorative hardware.
This satin nickel cabinet hardware knob has a 15/16 inch base diameter, which defines the contact ring resting on the cabinet surface during installation.
The P3102-SN satin nickel knob uses an 8-32 screw thread size, which sets the fastener interface used to secure the knob to cabinet doors or drawers.
The Hickory Hardware Deco Series satin nickel knob in the P3102-SN model ties together a 1 inch diameter head, 7/8 inch projection, and 15/16 inch base to support clean layouts on cabinet doors and drawers. The satin nickel finish and zinc die cast construction define both the appearance and the underlying material, helping projects stay consistent when multiple knobs are used across a room or job. For work calling for Deco collection styling and satin nickel decorative hardware, this knob aligns size, finish, and thread details to support straightforward cabinet hardware planning.
Sold In: 1 Each