Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPCO2-VHM-1 to RSCO2-VHM-1.
Omega National CO2 Series Maple Tambour Doors describes a wood veneer tambour front designed for cabinet and appliance garage projects where a flexible, slatted maple surface is needed for a clean cabinet face. The 15 inch width establishes a defined opening size that suits layouts calling for a compact door span in a run of cabinets, which helps keep small appliance bays visually aligned with surrounding fronts. The 1/2 inch depth describes the overall door thickness, which affects how the door nests within a cabinet track system and how it transitions to adjacent cabinet parts. The maple wood veneer face provides a real-wood surface, giving finishers a solid starting point when they need to stain or clear-finish to coordinate with other maple cabinetry in the same run.
The 15 inch width on this Omega National CO2 Series Maple Tambour Doors piece sets a predictable door span, so cabinet designs can center or group this opening among neighboring units without later adjustments. The 1/2 inch depth defines the maple tambour thickness as it rides in a track space, which influences the groove or channel dimensions that fabricators cut into side panels or face frames. The maple wood veneer face creates a uniform substrate thickness for sanding and finishing, which helps maintain consistent reveal lines when this door sits next to solid maple rails, stiles, or neighboring fronts in the same bank of cabinets.
This Omega National CO2 Series Maple Tambour Doors product sits in the Appliance Garages & Tambour Doors class, positioning it for cabinet openings that need a flexible, roll-style front rather than a hinged door. The 15 inch width makes it a candidate for narrower appliance garage bays, coffee centers, or small work zones where a compact opening is preferred over a wide span. Because the visible surface is maple wood veneer, this tambour door works alongside other maple cabinetry in kitchens, break rooms, or shop furniture, helping keep the grain and tone consistent across the installation. The 1/2 inch depth allows the tambour to occupy a modest track space inside the cabinet, which is important when interior storage or equipment clearances are tight.
The combination of 15 inch width and 1/2 inch depth on the CO2-VMA-1 maple tambour door gives designers fixed reference points, so cabinet cutlists and machining setups can be repeated from job to job. Working with a maple wood veneer face gives finish departments a familiar surface that responds predictably to stains, clear coats, and toners used on other maple cabinet projects, which helps reduce color variation across door runs. The CO2 Series designation ties this door to a known Omega National tambour family, so shops can build standards around this line when laying out appliance garages and similar cabinet fronts. Using a defined manufacturer part number, CO2-VMA-1, supports straightforward reordering and documentation, which keeps future replacements or expansions aligned with the original cabinet appearance.
The Omega National CO2-VMA-1 maple tambour door is 15 inches wide and 1/2 inch deep, which sets the opening span and track space when designing or machining cabinet components.
The CO2-VMA-1 tambour door uses maple wood veneer on its face, giving finishers a real-wood surface that can be stained or clear-finished to coordinate with other maple cabinetry.
This item is classified under Appliance Garages & Tambour Doors, positioning it for cabinet openings that benefit from a flexible tambour-style closure instead of a hinged door.
The CO2 Series label groups this maple tambour door into a defined Omega National product series, helping shops standardize on a consistent look and construction across projects.
The 1/2 inch depth defines the tambour thickness as it travels in its track space, which influences the groove dimensions machined into cabinet side panels or face frames.
The maple veneer surface allows the tambour to visually match other maple cabinet components, supporting a unified appearance across appliance garages and neighboring fronts.
The Omega National CO2 Series Maple Tambour Doors CO2-VMA-1 model combines a 15 inch width, 1/2 inch depth, and maple wood veneer face, giving cabinetmakers fixed parameters for appliance garage or tambour-front openings. These defined dimensions and surface characteristics support consistent cabinet layouts and finishing schedules across kitchens, break rooms, or shop furniture projects. For projects calling for a maple veneer tambour front within this size range, this Omega National Products part aligns cabinet design, machining, and finishing around a single, documented component.
Sold In: 1 Each