Berenson Virtuoso Series Rubbed Bronze 1-1/8" (28.5 mm) L x 1-1/8" (29 mm) W Knob, - 7141-1010-C
Description
Berenson Virtuoso Cabinet Knob For Finished Cabinets
Berenson Virtuoso cabinet knob is a rubbed bronze knob from the Virtuoso Series, so it brings a coordinated, decorative look to cabinet doors and drawers where that collection is already in use. The knob is made from zinc die cast, giving a consistent manufactured form that supports uniform appearance across multiple cabinets. Its 1-1/8 inch length and 1-1/8 inch width create a compact square footprint that works well on smaller fronts without dominating the face. The 7/8 inch projection sets the hand clearance off the surface, giving space to grasp while keeping the knob close enough for tight kitchen or bath layouts. With a rubbed bronze finish, the knob presents a darker tone that pairs well with many stained or painted cabinet finishes in woodworking projects.
Key Virtuoso Knob Details That Support Use
- The 1-1/8 inch length gives a small-format pull area, which suits narrow drawer fronts or doors where space between knobs is limited.
- The matching 1-1/8 inch width creates a balanced square profile, which helps align visually on face frames and slab fronts for consistent layout.
- The 7/8 inch projection sets the grip away from the cabinet face, which allows fingers to wrap behind the knob while still clearing adjacent doors.
- The base diameter of 3/8 inch defines the contact circle on the surface, which helps installers visualize coverage over the drilled hole.
- The rubbed bronze finish establishes a dark, muted appearance, which supports design work that calls for warm, low-sheen decorative hardware.
- The zinc die cast material gives a molded construction, which helps maintain matching shape and detail when multiple knobs are installed in a run.
Mounting And Screw Size Details For This Knob
This knob uses an M4 x 45mm screw size, so the through-bore in the cabinet front is set up for a metric M4 machine screw thread. The 45mm length specification identifies the screw length used with this knob, which matters when working with thicker doors or applied drawer fronts that require additional reach. With the knob projecting 7/8 inch from the surface, the installer can plan clearances relative to adjacent hardware or walls. The 3/8 inch base diameter defines the footprint that rests against the cabinet face, helping layout work where the contact area needs to sit fully on a rail or stile.
How This Virtuoso Series Knob Fits Real Projects
Where The Rubbed Bronze Knob Works Best
This Berenson Virtuoso Series knob belongs to the decorative hardware and moldings category, so it is suited for visible cabinet, furniture, and millwork applications where appearance matters. The rubbed bronze finish coordinates with other rubbed bronze hardware on doors and drawers, supporting unified hardware schemes in kitchens, baths, and built-ins. Its compact 1-1/8 inch by 1-1/8 inch size keeps the hardware proportionate on small drawers or narrow doors, which is useful on upper cabinets or vanity banks. The 1-13/16 inch listed length and width dimension from the web description gives another size reference, helping designers and installers compare the knob to existing pulls in a project. With the Virtuoso Series identity, this knob can match other pieces from the same Berenson collection in a woodworking installation.
Details That Support Consistent Layout And Replacement
The zinc die cast construction of this knob provides a consistent shape from piece to piece, which helps installers achieve aligned sight lines when rows of knobs are mounted. The M4 x 45mm screw size defines the thread and typical screw reach, which is important when drilling and preparing doors and drawer fronts for this specific knob. The 7/8 inch projection and 3/8 inch base diameter give clear dimensional points, letting cabinetmakers plan spacing so doors do not conflict when opened. The manufacturer part number 7141-1010-C uniquely identifies this exact Berenson Virtuoso Series rubbed bronze knob, which simplifies reordering or matching during future remodel work. Being part of the knobs, Berenson product class keeps it within a known hardware family, supporting specification documents and cut sheets for cabinet projects.
Common Questions About This Berenson Virtuoso Knob
What are the key dimensions of this Virtuoso Series knob?
The Berenson Virtuoso Series knob has a listed length of 1-13/16 inch, a width of 1-13/16 inch, a projection of 7/8 inch, and a base diameter of 3/8 inch, which guides placement on cabinet faces.
How does the 7/8 inch projection affect cabinet use?
The knob projection of 7/8 inch sets the gripping point off the door or drawer surface, which provides finger clearance while keeping hardware close for tight installations.
What material is this rubbed bronze cabinet knob made from?
This rubbed bronze cabinet knob is made from zinc die cast, which delivers a molded construction that maintains consistent shape and detailing across multiple knobs in a project.
What screw size is specified for this Berenson Virtuoso knob?
This Berenson Virtuoso knob uses an M4 x 45mm screw size, which defines the thread and length used when fastening the knob through cabinet doors or drawer fronts.
How does the rubbed bronze finish support design choices?
The rubbed bronze finish provides a dark, muted look that coordinates with many stained or painted cabinet finishes, supporting projects that call for warm-toned decorative hardware.
What is the significance of part number 7141-1010-C?
Part number 7141-1010-C is the manufacturer identifier for this specific Berenson Virtuoso Series rubbed bronze knob, which simplifies ordering and matching in cabinet hardware schedules.
Select This Rubbed Bronze Knob For Coordinated Work
The Berenson Virtuoso cabinet knob in rubbed bronze combines zinc die cast construction, 1-1/8 inch sizing, and a 7/8 inch projection to support practical cabinet use. With its M4 x 45mm screw size and defined base diameter, it aligns well with planned bore patterns and layout lines. For projects built around the Virtuoso Series look, this 7141-1010-C knob lets installers and fabricators match finish and form across doors and drawers in the same run.