Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Virtuoso knob is a zinc die cast cabinet knob in the Virtuoso Series from Berenson Corporation, sized 1-3/8 inch long by 1-3/8 inch wide. That square footprint gives doors and drawers a balanced contact point, which helps layouts look orderly on aligned fronts. The knob uses a Rustic Tin finish, so it delivers a weathered metal appearance that supports designs calling for a worn, traditional, or industrial look. The projection is 1 inch from the mounting surface, giving enough clearance for fingers while keeping the pull point close to the face of the cabinet for a tight profile. A 3/8 inch base diameter focuses the load onto a compact pad, which is useful when laying out on narrow stile frames or smaller drawer fronts. The part is identified as 7144-10RT-C, supporting consistent repeat selection across multiple jobs.
The knob uses an M4 x 45mm screw size, which ties directly into standard metric cabinet drilling setups and boring patterns used in many shops. Using that thread size lets installers work with existing M4 drilling workflows when mounting through common door and drawer thicknesses. The 1 inch projection sets the working distance from the cabinet face, helping layouts where internal clearances near adjacent walls or appliances are important. With a 1-3/8 inch by 1-3/8 inch square profile, the knob centers cleanly over a single bored hole, which supports accurate alignment down long cabinet runs. The 3/8 inch base diameter localizes contact at the mounting point, which matters when positioning near narrow stile edges or inside tight panel reveals on detailed fronts.
This Virtuoso Series cabinet knob, at 1-3/8 inch length and width, suits both cabinet doors and drawer fronts where a single pull point is needed. The square plan makes it practical for grid-like cabinet layouts, because spacing from edges reads consistently from piece to piece. The Rustic Tin finish means it pairs with projects calling for a muted, aged metal tone, supporting jobs that lean toward traditional, farmhouse, or industrial-influenced interiors. Since the knob is part of the Virtuoso Series, it fits into projects already using Virtuoso hardware, so visual lines and proportions stay the same from base cabinets up through wall units. The zinc die cast construction keeps the piece in the decorative metal category, fitting the expectations of residential and light commercial cabinet work.
The specified screw size of M4 x 45mm gives installers a clear metric thread and length target, which aligns with common through-bore cabinet construction and helps maintain consistency when drilling multiple fronts. The 1-3/8 inch by 1-3/8 inch face dimension makes laying out centerlines straightforward, because a single bore location defines both horizontal and vertical alignment. A projection of 1 inch controls how far the hand moves away from the door, which can matter when running hardware near adjacent tall cabinets, side panels, or tight walkways. The 3/8 inch base diameter defines the bearing circle against the wood surface, letting layout crews judge edge distances and stile clearances from a known contact point. The manufacturer part number 7144-10RT-C anchors the exact configuration, so repeat orders and punch-list replacements match the installed hardware visually and dimensionally.
The Berenson Virtuoso knob measures 1-3/8 inch in length and 1-3/8 inch in width with a 1 inch projection and a 3/8 inch base diameter, giving a compact square pull profile.
The knob is made from zinc die cast material with a Rustic Tin finish, creating a metal piece with an aged tin appearance suited to rustic or industrial cabinet designs.
The 7144-10RT-C knob is specified with an M4 x 45mm screw size, tying into standard metric cabinet boring patterns for doors and drawers using M4 machine threads.
The rustic tin cabinet knob has a 1 inch projection, placing the grip close to the door face and supporting low-profile hardware runs along cabinet fronts.
This knob belongs to the Berenson Virtuoso Series, aligning its style and proportions with other Virtuoso decorative hardware pieces on the same project.
The 3/8 inch base diameter concentrates contact at a small footprint, helping placement on narrow stiles or slim drawer fronts without crowding edges or trim details.
This Berenson Virtuoso Series Rustic Tin knob, at 1-3/8 inch square with 1 inch projection, offers a defined set of dimensions for planning cabinet layouts. The zinc die cast construction and Rustic Tin finish give a predictable material and surface in the decorative hardware package. With a specified M4 x 45mm screw size and 3/8 inch base diameter, the knob ties cleanly into common cabinet boring and mounting practices. For projects using Virtuoso Series styling and a rustic tin look, this 7144-10RT-C knob provides a consistent choice for doors and drawers across the run.
Sold In: 1 Each
