Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Opus rustic tin knob is a zinc die cast cabinet knob from the Opulence Series that provides a decorative pull point for doors or drawers, giving a consistent touch point across cabinetry runs. The rustic tin finish presents a weathered metal look that visually suits traditional or relaxed spaces where subtle aging detail is preferred. The knob length of 1-3/8 inches offers a full finger grip, helping users grab and open fronts without slipping. A 1-3/16 inch width spreads the contact area, which supports a comfortable feel when pulling heavier cabinet fronts. The projection of 7/8 inch holds the hand slightly off the surface, helping reduce finger marks around the knob center. A base diameter of 1/2 inch concentrates the footprint, which can help this knob sit neatly on narrow frame sections or smaller drawer faces. The M4 x 45mm screw size provides a defined mounting interface for installers.
This Opus Series knob uses an M4 x 45mm screw size, establishing a metric threaded connection that pairs with common cabinet door and drawer front drilling setups. The 7/8 inch projection defines how far the knob stands off the surface, allowing installers to visualize hand clearance in tight galley layouts or near adjacent hardware. With a 1-3/8 inch length, the knob positions its longest dimension vertically or horizontally depending on drilling orientation, giving flexibility when setting out patterns across multiple fronts. The 1/2 inch base diameter centers the load around the mounting hole, which supports a tight fit on standard drilled bores. The zinc die cast material supplies a rigid mounting body, which works well with the M4 screw to keep the knob seated under repeated pulls.
This Berenson Opus Series rustic tin knob belongs to the Decorative Hardware & Moldings knob category, so it functions as a primary touch point on cabinet doors and drawers in kitchens, bathrooms, or built-in furniture runs. The 1-3/8 inch length and 1-3/16 inch width create a proportion that suits both base and wall cabinets, helping layouts keep one knob size across upper and lower sections. In spaces favoring warmer metal tones, the rustic tin finish introduces an aged appearance that coordinates with similar rustic tin hardware pieces. The 7/8 inch projection defines a profile that works on fronts where deeper pulls might interfere with nearby edges, giving adequate grip without pushing too far into walk paths. Because this knob is part of the Opulence Series, it supports design schemes that repeat the same style across multiple cabinets for a unified look.
The defined 1/2 inch base diameter helps installers position the knob consistently over standard drill locations, which supports straight visual lines when multiple knobs are aligned across drawer banks. Using the specified M4 x 45mm screw size means the mounting interface is predictable, which simplifies planning for bore diameters and hardware scheduling in a shop setting. Zinc die cast construction gives the knob a solid, formed core, helping it maintain its geometry when subjected to repeated opening cycles in high-use areas. The rustic tin finish supplies a textured metal appearance that can help visually soften high-contrast cabinet colors. With length, width, projection, and base measurements clearly identified, layout decisions such as center-to-edge spacing or vertical placement can be calculated in advance, supporting repeatable results from cabinet to cabinet and reducing layout variation across a project.
The Berenson Opus rustic tin knob has a length of 1-3/8 inches, a width of 1-3/16 inches, a projection of 7/8 inch, and a base diameter of 1/2 inch, guiding layout and clearance decisions.
The 7/8 inch projection sets the knob away from the door or drawer front, giving fingers room to pull while helping limit contact with the cabinet surface around the knob.
The 7171-10RT-C Opus knob is zinc die cast, providing a solid formed body that supports a stable pull point on cabinet fronts during frequent daily use.
This Opulence Series cabinet knob has a rustic tin finish, delivering a weathered metal look that coordinates with other rustic tin decorative hardware in a project.
This Berenson Opus rustic tin knob uses an M4 x 45mm screw size, giving installers a defined threaded interface for drilling and fastening cabinet doors and drawer fronts.
The 1/2 inch base diameter keeps the footprint compact around the mounting hole, which suits narrow rails or smaller fronts where larger bases might crowd nearby edges.
The Berenson Opus rustic tin knob combines a 1-3/8 inch length, 1-3/16 inch width, and 7/8 inch projection to create a balanced grip that works across many cabinet fronts. Zinc die cast construction and the rustic tin finish provide a defined visual and structural profile, while the 1/2 inch base and M4 x 45mm screw size supply clear mounting parameters. For projects calling for Opulence Series styling with rustic tin coloration, this knob offers measured dimensions that support consistent cabinet layouts and predictable hand clearance.
