Berenson Opus Series Rubbed Bronze 1-3/8" (35 mm) L x 1-3/16" (30 mm) W Knob, - 7172-1010-C

Berenson Opus Rubbed Bronze Knob For Cabinets

Berenson Opus Series rubbed bronze knob gives cabinets a defined 1-3/8 inch length profile that helps installers line up hardware along doors and drawers. The 1-3/16 inch width spreads the hand contact area, which supports comfortable everyday operation for users. Its 7/8 inch projection sets the knob out from the front, creating finger clearance that helps avoid knuckles dragging against finished surfaces. The 1/2 inch base diameter concentrates the mounting footprint, which is useful when working on narrow stiles or rail frames. Zinc die cast material builds the knob body, providing a consistent shape that supports uniform appearance across multiple openings. The rubbed bronze finish defines the visible surface tone, which matters when matching this knob to other rubbed bronze decorative hardware on the job.

Key Opus Knob Details That Help On Site

• The 1-3/8 inch length gives a repeatable reference point for layout, helping installers keep knobs aligned from cabinet to cabinet.
• The 1-3/16 inch width provides a usable gripping area, which helps users get a solid pull on doors or drawers without crowding their fingers.
• The 7/8 inch projection sets a consistent stand-off from the face, helping maintain clearance on thicker door edges or profiled fronts.
• The 1/2 inch base diameter keeps the contact area compact, which is helpful when mounting on narrow frames or near edge details.
• The rubbed bronze finish defines the color tone in the Opulence Series, supporting visual coordination with other rubbed bronze components on the same project.
• The zinc die cast construction creates a stable knob body, supporting consistent dimensions when multiple knobs are used across a run of cabinets.
• The M4 x 45mm screw size defines the thread and length, helping match the knob to cabinet doors or drawer fronts drilled for metric hardware.

Opus Knob Fit, Mounting, And Screw Details

The Opulence Series zinc die cast knob uses an M4 x 45mm screw size, setting the thread standard that pairs with common metric boring in cabinet shops. Its 7/8 inch projection works with the 1/2 inch base diameter to define how far the knob stands off the face, which matters when planning door swing clearance next to walls or adjacent fronts. The 1-3/8 inch length and 1-3/16 inch width together define the overall footprint, helping installers position the center point so the knob clears edge profiles and still looks balanced on narrow rails.

Using This Opus Series Knob In Cabinet Work

Where The Opus Rubbed Bronze Knob Fits Best

This Berenson Corporation Opus Series rubbed bronze knob is part of the Opulence Series, placing it within a decorative hardware family that targets cabinet applications. The 1-3/8 inch length gives enough presence for standard kitchen and bath doors while staying compact for smaller vanity or office cabinets. With a 1/2 inch base diameter, the knob sits comfortably on face frames without overhanging narrow stiles, which is important on inset or framed construction. The 1-3/16 inch width supports use on both doors and drawer fronts, so shops can keep the same knob style across different cabinet types. Its rubbed bronze finish ties into rubbed bronze decorative hardware and moldings, helping maintain a coordinated look across knobs and other Berenson Opus Series pieces on the same run.

Details That Support Consistent Layout And Use

The zinc die cast material used in this Opulence Series knob helps maintain consistent sizing from piece to piece, which is valuable when lining up multiple knobs along a long bank of cabinets. The 7/8 inch projection sets a predictable distance from the cabinet face, supporting repeatable drilling patterns when using jigs or templates. With the M4 x 45mm screw size specified, shops can set up boring operations around a metric fastener standard, reducing layout changes between different knob models. The 1/2 inch base diameter also defines how much flat surface area is needed at the mounting point, guiding where installers place bores on detailed profiles. Together, the 1-3/8 inch length and 1-3/16 inch width help keep hardware visually centered on doors and drawers, which supports a clean finished look across the project.

Common Questions About This Berenson Opus Knob

Selecting This Opus Knob For Cabinet Projects

The Berenson Opus Series rubbed bronze knob, part of the Opulence Series, combines a zinc die cast body with a 1-3/8 inch length, 1-3/16 inch width, and 7/8 inch projection to define how it functions on cabinet fronts. Its M4 x 45mm screw size and 1/2 inch base diameter provide clear mounting parameters, which helps streamline layout across doors and drawers. For cabinet work calling for rubbed bronze decorative hardware, these defined dimensions and finish details support straightforward selection when matching other Berenson components.