Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Opus Series knob in the Opulence Series is a Verona Bronze cabinet knob designed for decorative cabinet and woodworking projects where consistent sizing matters. The knob uses zinc die cast construction, which provides a solid metal feel that suits regular opening and closing of doors and drawers. Its 1-3/8 inch length sets the hand contact area, giving a defined grip point that helps with repeatable pulls across a run of fronts. The 1-3/16 inch width defines the visible face, so layouts maintain a uniform appearance on framed or frameless cabinets. A 1/2 inch base diameter keeps the footprint compact, which helps when you are working near edge profiles or narrow rails. The 7/8 inch projection establishes stand-off from the surface, creating finger clearance that helps users grab the knob without scraping the cabinet finish.
The knob uses an M4 x 45mm screw size, which defines the thread interface to the cabinet front and affects drilling and boring setups. With a 1/2 inch base diameter, the bearing area at the cabinet face stays compact, which matters when placing the knob close to panel lines, glass inserts, or detailed profiles. The 7/8 inch projection dimension determines the distance from the mounting surface to the front of the knob, helping installers visualize how it will clear surrounding trim or adjacent doors. The 1-3/8 inch length and 1-3/16 inch width shape the handling area, giving a repeatable form factor that fits typical residential cabinet fronts and many furniture drawer applications.
This Berenson Corporation knob is part of the Opulence Series, so it aligns well with cabinet and woodworking projects built around that design family. The Verona Bronze finish gives the knob a defined color, which coordinates with other Verona Bronze components in the same space for a unified appearance. Its 1-3/8 inch length and 1-3/16 inch width keep the knob in a mid-size range that works well on standard kitchen, bath, or built-in cabinet fronts where users expect a comfortable single-hand grip. The 1/2 inch base diameter allows placement on narrower rails or stile areas without overpowering the surrounding profile, which is useful on smaller doors or furniture pieces. With a 7/8 inch projection, the knob stands out enough from the surface to provide finger clearance on thicker drawer fronts without extending excessively into walk paths or tight clearances around cabinetry.
The zinc die cast construction helps the knob hold a consistent shape from piece to piece, which supports straight sight lines when multiple knobs are used across a bank of doors. The defined 1-3/8 inch length and 1-3/16 inch width give installers predictable dimensions when they are laying out centerlines and drilling patterns, reducing layout variation between cabinets. The 1/2 inch base diameter limits how much of the door or drawer face is covered, preserving decorative panel profiles or veneer patterns that run close to the pull location. A 7/8 inch projection provides a measured stand-off that allows most fingers to wrap the knob without pressing against the cabinet face, which helps limit wear to finishes around high-use locations. The specified M4 x 45mm screw size identifies the thread type used to secure the knob, which matters when coordinating with pre-bored fronts designed around metric fastener standards.
The Berenson Opus Series knob has a 1-3/8 inch length and 1-3/16 inch width, giving a mid-size grip area that suits standard cabinet doors and drawers in many residential layouts.
The Verona Bronze cabinet knob projects 7/8 inch from the mounting surface, providing clearance for fingers while keeping the hardware close enough to the door or drawer front.
The 7173-10VB-P knob is made from zinc die cast material, giving a molded metal body that supports consistent sizing and shape across multiple installed knobs.
This Opulence Series cabinet knob belongs to the Opulence Series collection, aligning its style with other pieces in that Berenson decorative hardware family.
This Berenson cabinet knob has a 1/2 inch base diameter, creating a compact footprint that works near narrow rails, stiles, or detailed edge profiles on cabinet fronts.
This Verona Bronze knob uses an M4 x 45mm screw size, defining the metric thread standard that secures the knob to doors or drawers during cabinet installation.
The Berenson Opus Series knob in Verona Bronze brings a defined 1-3/8 inch by 1-3/16 inch profile that aligns with many cabinet and furniture fronts. Its zinc die cast construction and 7/8 inch projection give a predictable feel and clearance for repeated daily use. With a 1/2 inch base diameter and M4 x 45mm screw specification, the knob integrates into layouts that follow metric mounting standards while preserving nearby panel detail. For projects built around the Opulence Series look, this 7173-10VB-P knob offers matched sizing and finish to keep installations visually consistent.
