Berenson Maestro Series Satin Nickel 1-3/8" (35 mm) Diameter Knob, - 7182-1015-C
Description
Berenson Maestro Series Satin Nickel Knob Use
Berenson Maestro Series satin nickel knob gives you a 1-3/8 inch (35 mm) diameter grip point, so fingers land comfortably and doors or drawers can be pulled open in a controlled way on typical cabinet fronts. The knob comes from the Maestro collection, so matching pieces share the same style line for visually consistent runs of cabinetry in kitchens, baths, or built-ins. Its satin nickel finish tones down reflectivity, which helps the knob read clean and professional under varied lighting without showing sharp glare. The knob is built from zinc die cast material, giving it a solid, uniform body that feels substantial in the hand and supports repeat use on frequently accessed fronts.
Key Details That Support Cabinet Projects
- The 1-3/8 inch diameter face creates a broad contact area, which helps spread pulling force across the front and supports a comfortable grip when opening heavier cabinet doors or drawers.
- The satin nickel finish provides a muted metallic look, which works well where a modern but understated appearance is needed across multiple cabinets in the same room.
- Zinc die cast construction forms a dense, one-piece knob body, so the part feels solid during daily operation and supports consistent performance across a bank of doors.
- The Maestro collection designation ties this knob to the same design family, allowing installers to carry the same look across upper cabinets, base cabinets, and other casework.
- The round knob profile suits left- or right-hand use equally, giving flexibility when laying out hardware on mixed cabinet configurations in a space.
Dimensions And Fit For Cabinet Mounting
This Maestro knob has a stated length or diameter of 1-3/8 inch, which sets the overall face size that interacts with the user and determines how much of the cabinet front it visually occupies. The base diameter is 9/16 inch, so the footprint against the door or drawer front is compact, helping the knob sit cleanly on narrow rails or stile edges. A projection of 15/16 inch sets how far the knob stands off the surface, giving fingers room to hook behind while staying tight enough to avoid snagging in close quarters or on passing clothing along walkways.
Using The Maestro Satin Nickel Knob In Work
Where This Maestro Collection Knob Fits Best
The Berenson Maestro Series satin nickel knob works as a round pull point on cabinet doors or drawer fronts where a 1-3/8 inch diameter element matches the scale of the face. Because the finish is satin nickel, it visually coordinates with other satin nickel decorative hardware and moldings in the same project, allowing a unified look between knobs, pulls, and trim pieces. The knob sits in the Decorative Hardware & Moldings and Knobs categories, so it is aimed at cabinetry and casework rather than structural fastening, keeping its role focused on everyday opening and closing tasks. With its zinc die cast construction, the knob serves well on frequently used doors, supporting a consistent feel from one opening to the next in kitchens, baths, offices, or shop cabinetry.
Why These Knob Dimensions Support Consistent Results
The 1-3/8 inch diameter and 15/16 inch projection work together to create a predictable hand clearance, which helps installers lay out multiple knobs at the same height knowing that each grip point behaves the same. The 9/16 inch base diameter defines the contact circle on the cabinet face, so installers can align the knob center relative to rail widths or panel details with confidence about how much visual space the base occupies. The specified M4 x 45mm screw size interfaces with the knob, giving a known thread standard that fits common cabinet drilling setups using metric screws in this length range. Because all these values are fixed by the 7182-1015-C part number, repeat orders for the same job or future add-on cabinets will bring in knobs that match the original scale, projection, and connection points.
Common Questions About This Satin Nickel Maestro Knob
What is the face size of this Maestro cabinet knob?
The Berenson Maestro Series satin nickel knob has a 1-3/8 inch diameter face, which sets the visual scale and provides a broad area for gripping cabinet doors or drawers.
How far does the 7182-1015-C knob project from the cabinet?
The 7182-1015-C satin nickel knob projects 15/16 inch from the cabinet front, creating finger clearance while keeping the knob close to the surface in tight spaces.
What material is the Maestro collection knob made from?
The Maestro collection knob is made from zinc die cast material, giving the knob a solid, uniform body suitable for repeated use on cabinet fronts.
What screw size does this satin nickel knob use?
The satin nickel knob uses an M4 x 45mm screw size, so it pairs with standard metric cabinet fasteners in that thread and length range.
Which finish does the Berenson Maestro Series knob have?
The Berenson Maestro Series knob has a satin nickel finish, giving a muted metallic appearance that coordinates with other satin nickel decorative hardware.
How does the base diameter affect cabinet layout?
The 9/16 inch base diameter defines the footprint on the cabinet face, helping layout work where knobs must fit cleanly on narrow rails or stiles.
Choose This Maestro Knob For Matching Projects
The Berenson Maestro Series satin nickel knob with 1-3/8 inch diameter, 9/16 inch base diameter, and 15/16 inch projection provides a defined size package for consistent cabinet work. Its zinc die cast construction and satin nickel finish keep the look and feel aligned across doors and drawers, while the M4 x 45mm screw interface ties into common cabinet fastening practice. Selecting this 7182-1015-C part number allows projects using Maestro collection hardware to carry the same dimensions and finish from one installation phase to the next.