Berenson Maestro Series Rubbed Bronze 1-3/8" (35 mm) Diameter Knob, - 7184-1010-C
Description
Maestro Knob 1-3/8 Inch Rubbed Bronze Use
Maestro knob 1-3/8 inch rubbed bronze defines this Berenson Corporation Maestro Series cabinet knob as a compact, consistent pull point for doors and drawers, giving installers a repeatable layout reference across a project. The zinc die cast material creates a stable, rigid knob body, so the pull point stays solid when cabinets are opened repeatedly in everyday use. A 1-3/8 inch diameter face establishes a clear hand contact area, helping users grab confidently without crowding adjacent hardware. The 9/16 inch base diameter focuses the load into a small, defined footprint on the cabinet surface, which supports firm mounting on typical cabinet faces. The 15/16 inch projection holds the knob just under an inch off the fascia, creating finger clearance while keeping the hardware tight to the door or drawer. The rubbed bronze finish delivers a dark, muted appearance that coordinates with similar toned decorative hardware in the same space.
Key Maestro Series Rubbed Bronze Knob Details
- The Maestro Series designation ties this knob to the Berenson Maestro collection, which helps installers maintain a consistent style across multiple cabinets when specifying hardware from the same family.
- The zinc die cast construction forms a dense, molded knob body that supports a firm feel at the pull point, which is useful on frequently used cabinet doors and drawers.
- The rubbed bronze finish provides a dark metal appearance that visually matches other rubbed bronze decorative hardware, supporting unified finishes across a room or run of cabinets.
- The 1-3/8 inch diameter face sets a predictable contact size for hands, giving a defined pulling surface that works well on many standard cabinet door and drawer widths.
- The 9/16 inch base diameter concentrates the contact area against the cabinet face, which helps position the knob accurately during layout and drilling.
- The 15/16 inch projection keeps the front of the knob close to the cabinet while still giving space for fingers to grip from different approach angles.
- The specified width of 1-3/8 inch matches the stated diameter, simplifying layout measurements when aligning this knob horizontally with other hardware pieces.
Installation Dimensions And Screw Interface Details
This Maestro Series knob uses an M4 x 45mm screw size, so the threaded interface is metric and sized for that screw diameter, which is common in cabinet hardware layouts. The 1-3/8 inch diameter and matching 1-3/8 inch width provide a clear reference when marking hole centers on drawers or doors, supporting consistent spacing from edges. The 9/16 inch base diameter defines the footprint that contacts the door or drawer front, which is useful when aligning the knob to trim details or panel profiles. With a 15/16 inch projection, the pull point stands out far enough for comfortable use while staying close enough to the surface to avoid excessive leverage on the mounting point during operation.
Where This Berenson Maestro Knob Fits Best
Berenson Maestro Knob For Cabinet Doors
The Berenson Corporation Maestro Series knob with a 1-3/8 inch diameter is well suited to cabinet doors where a defined, circular pull is preferred, because the diameter provides a predictable hand contact area at each opening point. The 15/16 inch projection places the gripping surface slightly under an inch off the face, so users can wrap fingers around the edge of the knob without contacting the door surface first. The 9/16 inch base diameter helps position the knob centrally on narrow stiles, supporting balanced appearance when running several doors in a row. The rubbed bronze finish allows the knob to visually tie in with other rubbed bronze components in the same installation, creating continuity along a bank of doors.
Rubbed Bronze Cabinet Knob For Drawers
This rubbed bronze cabinet knob with a 1-3/8 inch diameter face works on drawers where a single centered pull is specified, because the consistent diameter simplifies alignment at mid-width. The zinc die cast material gives the knob body a solid feel under load as drawers are pulled outward, which suits drawers that see regular use in kitchens, baths, or work areas. The 15/16 inch projection defines the lever distance from the drawer front, so the force is applied close to the surface, helping maintain a controlled pull motion. The M4 x 45mm screw size specification sets the thread match for the knob, which matters when planning drilling and fastener selection for drawer fronts of varying thicknesses while keeping the same hardware style.
Common Questions About Berenson Maestro Knob Use
What are the main dimensions of this Maestro series knob?
The Berenson Maestro Series knob has a 1-3/8 inch diameter and width, a 9/16 inch base diameter, and a 15/16 inch projection, which together define its footprint and stand-off on cabinet surfaces.
How does the 15/16 inch projection affect cabinet use?
The 15/16 inch projection sets the pull point just under an inch from the cabinet face, giving finger clearance for gripping while keeping the knob close enough to limit leverage on the door or drawer.
What material is the Berenson Maestro knob made from?
The Berenson Maestro Series knob is zinc die cast, creating a molded metal body that supports a solid feel when pulling cabinet doors and drawers repeatedly.
What finish does this 1-3/8 inch Maestro knob have?
This 1-3/8 inch diameter Maestro knob has a rubbed bronze finish, giving it a dark metal appearance that coordinates with other rubbed bronze decorative hardware in the space.
What screw size does this cabinet knob use?
This cabinet knob uses an M4 x 45mm screw size, so its internal thread matches that metric diameter for fastening through typical cabinet door or drawer fronts.
Who manufactures the Maestro Series rubbed bronze knob?
The Maestro Series rubbed bronze 1-3/8 inch diameter knob is manufactured by Berenson Corporation, aligning it with other Berenson decorative hardware products.
Select This Maestro Knob For Consistent Style
The Maestro knob 1-3/8 inch rubbed bronze provides a defined 1-3/8 inch diameter face, 9/16 inch base diameter, and 15/16 inch projection, giving installers predictable layout measurements across cabinet doors and drawers. The zinc die cast construction and rubbed bronze finish connect this knob to the Berenson Maestro Series, supporting visual continuity wherever this hardware is specified. For projects calling for a metric-thread knob using M4 x 45mm screw size and a compact, round pull profile, this Berenson Maestro Series rubbed bronze knob aligns with those dimensional and appearance requirements.