Flush Trim V-Groove Bit For Clean Cabinet Work

flush trim v-groove bit from Amana Tool trims the edges of face frames flush with cabinet sides while also cutting a decorative V groove, so one pass both evens the frame and creates a finished detail at the joint. The 5/8 inch diameter cutting head controls the cut width, which helps define how the V groove presents along the seam between frame and case. A 1 inch cutting height gives coverage for typical face frame stock, supporting a full flush trim across the frame edge. The 3-1/4 inch overall length provides reach from the collet to the work, which matters when working on assembled cabinet cases. A 1/2 inch shank fits routers that accept this shank size, giving a solid interface between bit and collet for stable cutting.

Key Trim Bit Details That Support Cabinet Jobs

• The 5/8 inch diameter controls the groove width and trimming path, which helps keep the V detail consistent along face frame seams.
• The 1 inch cutting height matches common frame thickness, so the bit can flush-trim the full edge without leaving a shoulder.
• The 3-1/4 inch overall length sets the working reach, which supports trimming on assembled cabinets where access can be limited.
• The 1/2 inch shank engages routers sized for this shank, giving a solid grip in the collet for controlled cuts on hardwood or panel stock.
• The 2-flute cutting design shapes the trim and V groove profile in one rotation step, simplifying router passes along the cabinet edge.

Installation And Router Setup For Precise Trimming

The 1/2 inch shank seats into a matching router collet, which positions the bit securely for trimming along cabinet sides. With a 1 inch cutting height, the bit engages the full thickness of typical face frame stock when set to the proper depth, helping align the frame edge with the case side. The 5/8 inch diameter sets the contact area along the edge, so the router can track the cabinet side while the V groove forms at the seam. The 3-1/4 inch overall length gives room to clear the router base and reach the joint line on deeper cabinet fronts.

Using This Router Bit In Cabinet Construction

Where This Router Bit Fits Into Cabinet Builds

This Amana Tool router bit is classified under trim bits and router bits, so it serves in routing tasks that finish cabinet edges. It is described for trimming the edges of face frames flush with cabinet sides, placing it directly in the stage where frames are already attached to the case. By cutting a decorative V groove at the same time, the bit works along the seam between the frame and the case, adding a visible detail right at that transition. The 5/8 inch diameter and 1 inch cutting height define the area of contact at the joint, which matters when matching the bit to the cabinet dimensions used in a shop. The 3-1/4 inch overall length lets the bit operate on assembled cases where some depth from the router base to the seam is required.

Bit Details That Support Repeatable V-Groove Results

The 2-flute configuration shapes the trim and V groove each rotation, which helps create a consistent profile along the full run of the face frame seam. The 1/2 inch shank connects the bit to the router using a common heavy-duty shank size, helping maintain alignment during passes along long cabinet sides. Diameter at 5/8 inch keeps the V groove and trim path within a controlled width, which benefits repeat work across multiple cabinets using the same setup. With a 1 inch cutting height, the bit engages enough material for standard face frames, aiding in duplicate results from cabinet to cabinet. The manufacturer part number 47162 identifies this specific geometry, so shops can match replacement bits to existing setups without changing trim and groove dimensions.

Common Questions About This Flush Trim V-Groove Bit

Select This Bit For Face Frame V-Groove Trimming

This Amana Tool flush trim v-groove bit is specified to trim face frame edges flush with cabinet sides while forming a decorative V groove at the seam, so it targets that combined cleanup and detailing step. With a 5/8 inch diameter, 1 inch cutting height, and 3-1/4 inch overall length on a 1/2 inch shank, its dimensions are defined for routing along cabinet frames and cases. For shops routing face frames to cabinet sides with a V-groove finish, these fixed dimensions outline how the bit will perform on that task.