Double roman ogee router bit from Amana Tool is a profiling router bit designed to cut a reverse of the classical cove and bead, so you get a decorative edge profile in a single pass on appropriate stock. The bit has the cove coming directly off the bearing, which guides the cut along the workpiece and helps keep the profile consistent against a template or edge. Radius of the cove and bead are identical at 5/32 inch, creating balanced curves that line up visually along doors, rails, or trim. The 1 inch diameter cutting profile engages enough material for a defined shape, useful when a pronounced detail is needed along an edge. A cutting height of 5/8 inch sets the maximum depth of the profiled area, so the cutter can cover common edge widths in cabinet and furniture work.
The 1/2 inch shank is sized for routers with a 1/2 inch collet, which gives a thicker shank section to help reduce flex under load during profiling passes. This bit is suitable for use in either hand held or table mounted routers, so it can be set up in a portable router for on-site work or in a router table for shop-based runs. Using it in a table mounted router lets the bearing ride along fences or templates from below the workpiece, which helps when repeating the same double roman ogee detail on multiple parts. In a hand held router, the same bearing-guided design follows the work edge from above, which supports routing longer edges that are easier to handle off the table.
This Amana Tool router bit belongs to the profiling class of router bits, so it is intended for shaping decorative edges rather than joinery. The double roman ogee profile, described as the reverse of the classical cove and bead, suits edge details on cabinet doors, drawer fronts, and trim components where a shaped reveal is needed. The 1 inch diameter working profile lets the bit form a bold curve that stands out on face frames or wide rails. With a 5/8 inch cutting height, the profiled section covers common edge widths, which is practical for furniture tops and fascia where the detail stays near the outer edge. Having the cove originate at the bearing means the bearing rides the stock while the cove portion cuts immediately next to it, which is helpful when following straight or gently curved templates in custom work.
The matching 5/32 inch radius on both the cove and bead portions of the profile keeps the shape uniform along its full height, which supports visual consistency when lining up multiple routed parts side by side. A 2-flute layout provides two cutting edges, so each flute removes less material per revolution and helps the bit leave a finer finish surface that needs less sanding under typical feed rates. The 1/2 inch shank offers a larger cross-section than smaller shanks, which supports a more rigid connection in the router collet and contributes to smoother tracking along the edge. The total 2-1/2 inch overall length establishes how far the cutting edges extend from the collet, which affects how the router base, bearing, and workpiece interact during edge passes. Because the bit can be used in either hand held or table mounted routers, the same profile geometry can be applied in different setups, which helps keep profiles matching whether parts are processed on a bench or routed on installed work.
The Amana Tool 49210 bit cuts the reverse of the classical cove and bead, with the cove coming off the bearing, so it forms a double roman ogee-style decorative edge in one pass.
The Amana Tool 49210 router bit has a 5/32 inch radius on both the cove and bead, creating identical curves that keep the profile visually balanced across routed parts.
The Amana Tool 49210 bit has a 1/2 inch shank, so it is designed for routers equipped with a 1/2 inch collet that can hold this shank size securely during profiling.
The Amana Tool 49210 bit is specified for use in either hand held or table mounted routers, allowing it to be set up in a router table for repeated profiling.
The Amana Tool 49210 bit has a 1 inch diameter cutting profile, a 5/32 inch radius, a 5/8 inch cutting height, and a 2-1/2 inch overall length for typical edge profiling tasks.
The Amana Tool 49210 uses a 2-flute design, so two cutting edges share the material removal, which supports smoother cuts under normal routing feed and speed conditions.
The Amana Tool 1 inch x 5/32 inch radius double roman ogee router bit combines a 1/2 inch shank, 2-flute layout, and 5/8 inch cutting height to handle decorative edge profiling in either hand held or table mounted routers. Using this 49210 double roman ogee bit keeps the cove and bead radii identical, so profiles align when running multiple parts for cabinetry or furniture projects. For woodworking operations that call for a defined reverse cove-and-bead detail, this profiling router bit provides the geometry and dimensions needed to match that edge across your work.
Sold In: 1 Each