Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amana Tool edge forming router bit produces a fingernail flute rather than a full 180 degree radius flute, so it shapes a more compact decorative profile along an edge where a full half-round would be too wide. The bit is part of the Amana Tool edgeforming router bits class, which keeps it in the wheelhouse for projects needing clean, repeatable edge shaping. A 3/4 inch radius is built into the cutter, so each pass forms a substantial contour that shows clearly on moldings or trim. The 7/8 inch cutting diameter defines the overall width of the cut, helping you plan stock size and layout along an edge. With a 1 inch cutting height, the bit can cover common edge thicknesses in a single pass when the workpiece matches that dimension.
The bit is designed for use in a hand held or table-mounted router, so you can choose the setup that matches the job or shop workflow. The 1/2 inch shank seats into a matching collet, which centers the 7/8 inch diameter cutter so the flute tracks true. With a 1 inch cutting height, you can align the profile to the edge thickness by setting bit height in the router lift or base. The ball bearing guide runs against the workpiece edge during cutting, which keeps the fingernail flute on line even when following curved or straight edges.
This router bit is part of the Bits, Blades and Cutters edgeforming category, so its role is shaping decorative or functional edges on workpieces. The fingernail flute it produces suits edge runs where a more modest cut than a full 180 degree radius flute is needed, such as along rails, stiles, or longer trim. The 3/4 inch radius produces a noticeable, rounded contour that breaks sharp corners while remaining distinct in profile. With a 7/8 inch diameter and 1 inch cutting height, the cutter can address a range of edge dimensions that fall within those measurements, letting you repeat the same profile across different parts that share similar thickness.
The 2-flute cutter layout shares the cutting load between two edges, which helps the bit maintain the designed fingernail flute geometry as it rotates. Because the bit has a defined 3/4 inch radius and 7/8 inch diameter, you can set up router fences or stops in a table-mounted router to return to the same position for repeated parts. The 1 inch cutting height gives a fixed vertical reference for bit height adjustments, so once the edge is centered on that cutting height, you can repeat the setting for matching pieces. The ball bearing guide controls lateral position against the workpiece edge, which is especially useful in hand held router work where the edge itself serves as the reference instead of a table fence.
The 54306 router bit produces a fingernail flute rather than a full 180 degree radius flute, so it cuts a rounded but shallower channel along the workpiece edge.
This router bit is designed for use in a hand held or table-mounted router, so it fits both bench work and on-site routing tasks using the same profile.
The ball bearing guide at the tip rides along the edge of the workpiece, so it keeps the fingernail flute aligned with the edge without relying solely on a fence.
The 3/4 inch radius defines the curvature of the flute, so every pass creates a consistent rounded shape that can be repeated across multiple parts.
The 1 inch cutting height allows the bit to shape up to 1 inch of edge height per pass, so it can cover common edge thicknesses in a single setup.
The Amana Tool 54306 router bit has a 1/2 inch shank, so it fits routers equipped with a 1/2 inch collet for this class of bit.
The Amana Tool edge forming router bit with 3/4 inch radius, 7/8 inch diameter, and 1 inch cutting height gives a defined fingernail flute profile for edgeforming tasks. The 1/2 inch shank and ball bearing guide support both hand held and table-mounted router setups. With its 2-flute design and specific Amana Tool 54306 identity, this bit fits jobs that call for a controlled, repeatable fingernail flute instead of a full 180 degree radius flute.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AA54302 Mfr# 54302 | Amana Tool edge forming router bit 54302 |