Edge Forming Beaded Groove 2-Flute router bit 56174

Edge Forming Beaded Groove 2-Flute Router Bit Use

Edge Forming Beaded Groove 2-Flute router bit from Amana Tool is a router bit designed to cut beaded quarter-round profiles while grooving. It forms a quarter-round profile on each side of a flat, so one pass shapes both beads and the center channel in a consistent pattern. Used with a fence or edge guide, this beading bit functions as an edge former, allowing the same tool to handle both grooving and decorative edge work along a board. The 7/8 inch diameter cutting profile engages a broad area, which helps produce a noticeable bead detail along cabinet parts, trim, and similar workpieces where a defined groove and bead look are required.

Key Beaded Groove Bit Details For Woodworkers

• The 7/8 inch diameter cutting profile shapes a wide beaded groove, which matters when a pronounced decorative line is needed along door rails, stiles, or face frames.
• The 13/64 inch radius forms each quarter-round bead, so the resulting profile has a consistent small-radius curve that reads cleanly on finished edges.
• The 15/32 inch cutting height defines how deep the profile cuts into the edge or surface, which helps match this bit to stock thickness and desired bead depth.
• The bit forms a quarter-round on each side of a flat, so the groove and beads are aligned by design, reducing layout steps when repeating the same detail.
• Using the bit with a fence or edge guide supports straight tracking along workpieces, which helps maintain a uniform beaded groove from end to end.

Installation And Router Fit Details For This Bit

This Amana Tool router bit uses a 1/4 inch shank, so it seats in routers designed for 1/4 inch shank tooling, supporting common handheld and table-mounted setups that accept this size. The overall length of 2-3/16 inch gives the bit enough projection for its 15/32 inch cutting height while leaving remaining shank length for secure clamping in the collet. With D1 specified at 1/2 inch, the bit presents a defined shoulder portion in the profile that helps guide how the groove relates to adjacent surfaces. These dimensions work together so installers and woodworkers can position the beaded groove profile predictably relative to the edge or face being routed.

Using This Router Bit In Real Woodworking Jobs

Where This Edge Forming Beaded Groove Bit Works

This router bit is in the Grooving category and Product Class Router Bits, so it is suited for operations where a groove is cut while forming decorative detail. Its ability to cut quarter-round profiles on each side of a flat makes it useful wherever a double-bead look defines an edge or panel field. When used as an edge former with a fence or edge guide, it can run along straight stock such as cabinet doors, face frames, or trim pieces to create matching beaded lines. The 7/8 inch diameter cutting area allows the decorative profile to stand out on typical woodworking materials used in cabinetry, furniture, and interior finish work that fit the bit dimensions.

Why These Bit Dimensions Support Consistent Results

The 13/64 inch radius determines the curvature of each quarter-round bead, so every pass produces the same small, rounded shape that visually ties different pieces together in a project. The 15/32 inch cutting height sets the vertical extent of the profile, which helps keep the bead proportionate to common stock thickness, supporting repeatable visual balance across multiple parts. With a 1/4 inch shank, the bit interfaces with widely available 1/4 inch collets, simplifying tool changes when moving between different grooving or edge forming bits in the same router. The 2-3/16 inch overall length gives the bit reach for its profile while fitting typical router setups, which supports stable handling when guiding along a fence or edge guide. Being identified as Manufacturer Part 56174 and SAP Description 56174 BIT provides a consistent reference when matching this exact profile for repeat jobs or future replacements.

Common Questions About Amana Tool 56174 Bit Use

Select This Beaded Groove Bit For Defined Profiles

The Amana Tool Edge Forming Beaded Groove 2-Flute router bit with 7/8 inch diameter, 13/64 inch radius, and 15/32 inch cutting height gives a defined double-bead profile suited to decorative grooving. Its 1/4 inch shank and 2-3/16 inch overall length fit common router setups that accept this size. For repeatable beaded grooves on cabinet and woodworking projects that match the 56174 profile, this bit offers a clearly defined geometry ready for precise routing work.