2-5/8 3-Wing Straight Edge Cutter describes a carbide tipped shaper cutter that produces straight edge profiles, giving woodworking shops a dedicated tool for clean, accurate edging work. The Amana Tool brand identifies this cutter as a professional-grade option in the shaper cutters class, aligning it with cabinet, furniture, and general woodworking setups that rely on consistent edge passes. The 3-wing design means three cutting edges engage the work, which smooths the cut surface and supports efficient material removal in typical straight-edge operations. Being part of the Bits, Blades and Cutters category positions it as a cutting solution that fits into an existing tooling lineup rather than a specialty jig. The 3/4 straight cutter description signals a 3/4 inch bore size as the base configuration, fitting shaper spindles designed for that diameter in everyday shop workflows.
The 3/4 straight cutter designation establishes a 3/4 inch bore for mounting, matching shaper spindles built around that diameter so the cutter seats directly on properly sized arbors. Two reduction bushings sized 1/2 x 3/4 reduce the bore to 1/2 inch, allowing the same cutter body to be used on 1/2 inch spindles by stepping the bore down. This dual-bore capability lets a shop move the cutter between different shaper machines or spindle sizes without changing the core cutting tool, keeping edge profiles consistent across multiple stations. The individually packed detail indicates each cutter is supplied as a single unit, which aligns with typical tooling management where each shaper station is tooled up with a specific straight edge cutter when needed.
The Amana Tool straight edge shaper cutter sits in the Bits, Blades and Cutters category and the Shaper Cutters product class, placing it squarely in the tooling lineup for shaper-based woodworking operations. Its straight edge design targets tasks where boards or panels need accurate, flat edges, such as cabinet components, face-frame parts, or furniture rails that will be joined, laminated, or finished. The 2-5/8 inch 3-wing configuration provides a cutting width and edge count suited to typical shop shaper machines, so it can slot into existing workflows without changing overall process steps. As a carbide tipped cutter, it is built around a hard cutting material bonded to the body, aligning with applications that demand repeated passes on wood or similar materials while keeping edge quality consistent.
The 3/4 straight cutter description defines a base bore that pairs with 3/4 inch shaper spindles, setting an accurate fit that helps the cutter run true at operating speed. The provided reduction bushings sized 1/2 x 3/4 let users step the bore down to 1/2 inch, expanding the range of shaper spindles this single cutter body can mount on without changing the profile. By covering both 3/4 inch and 1/2 inch bore setups, the cutter supports a more flexible shop layout where different machines run the same straight edge profile. The carbide tipped feature means the cutting edges are made from a hard carbide material attached to the body, which resists wear compared with plain steel, helping maintain edge sharpness over longer runs. In a shaper environment, this allows the 3-wing design to keep producing clean straight edges with fewer stops for sharpening, which supports steadier throughput and repeatable edge quality across multiple workpieces.
The Amana 912 is a 2-5/8 inch 3-wing straight edge shaper cutter, so it is used on shaper machines to produce flat, straight edge profiles on workpieces.
The cutter is described as a 3/4 straight cutter, indicating a 3/4 inch bore that mounts directly on shaper spindles designed around that diameter.
The 1/2 x 3/4 reduction bushings step the 3/4 inch bore down to 1/2 inch, allowing the cutter to run on shaper spindles built for 1/2 inch tooling.
The carbide tipped construction gives the cutting edges high wear resistance, so the straight edge profile stays sharper longer during repeated shaper passes.
The 3-wing configuration provides three cutting edges, which divides the cutting load and supports smoother edge finishes at typical shaper feed rates.
This cutter sits in the Bits, Blades and Cutters category and the Shaper Cutters product class, aligning it with standard shaper tooling in woodworking shops.
The Amana Tool straight edge shaper cutter described here combines a 2-5/8 inch 3-wing profile with carbide tipped edges, giving shaper setups a focused tool for straight edge passes. Its role as a 3/4 straight cutter with 1/2 x 3/4 reduction bushings means it can mount on both 3/4 inch and 1/2 inch spindles, supporting shaper stations with different arbor sizes while keeping the same edge profile in use. As part of the Bits, Blades and Cutters and Shaper Cutters lines, it fits naturally into woodworking workflows that rely on shapers for accurate straight edging. For shops that want a single cutter style to cover multiple shaper machines, this configuration offers a straightforward way to standardize straight edge work across the floor.