Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 1805 drawer slides define this 20 inch, 3/4 extension, self-close epoxy coated euro slide set for side-mount drawer applications. The slides belong to the 1805 Series, so they match that family of euro slides when a job calls for a consistent system. The side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch each side sets the drawer opening requirement, which guides case construction and makes repeat layouts predictable. The slide height of 35.5 mm fixes how the slide sits on the drawer side, keeping vertical positioning consistent across a bank of drawers. A 32 mm pattern is specified, so hole locations line up with standard 32 mm system drilling for faster production work. The white finish and epoxy coated euro slide construction give a white appearance that matches white case interiors.
This 1805Q WH 500 side mount drawer slide specifies a side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch each side, so the drawer width must be sized precisely to that opening for proper running clearance. The slide height of 35.5 mm establishes where to place mounting lines on drawer sides and cabinet sides, which supports straight, parallel installation across a stack. The 32 mm pattern matches standard system boring, letting shops with 32 mm equipment mount slides using existing rows. Recommended fasteners are #6 x 5/8 inch Phillips pan head, so installers can match drill sizes and driver bits to that specification for consistent holding power in typical cabinet materials.
The 20 inch length and side mount drawer slide design position this 1805 Series model for cabinets built around approximately 500 mm depth, so it fits common base and utility cabinet depths. The side clearance requirement of 1/2 inch plus, 1/32 inch minus, 0 inch each side ties directly into cabinet opening widths, enabling frameless or face-frame construction to be laid out around that number. The unhanded configuration simplifies placement on left and right sides, which is useful on repetitive casework where orientation mistakes cost time. The white finish and epoxy coated euro construction coordinate with white interiors, so visible hardware aligns with light-colored casework when drawers are opened.
The self-closing design of this 1805Q WH 500 model acts during the final part of closing travel, drawing the drawer home so fronts line up consistently without repeated manual positioning. The positive double-out stop keeps the drawer from over-traveling in operation, which protects both the slide and the cabinet from impact at the end of stroke during daily use. A lift out disconnect allows the drawer member and cabinet member to separate, which helps installers pull drawers out for hinge adjustment, interior fitting, or service, then reseat them on the same track. The 32 mm pattern in the slide supports production drilling practices, so dowel or system-bored cabinets can receive these slides using existing row spacing and jigs. Using #6 x 5/8 inch Phillips pan head fasteners aligns with common stock in cabinet shops, which streamlines installation across many drawers in larger projects.
This 20 inch 1805 Series slide matches drawer boxes sized for approximately 500 mm side mount slides, so drawer depth can be coordinated with typical cabinet depths using that length.
This 1805Q WH 500 model specifies side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch each side, so drawer width is set from that measurement relative to the opening.
This Knape and Vogt 1805 Series slide uses a 32 mm pattern, which aligns with standard system boring and supports mounting to cabinets drilled on 32 mm centers.
This euro slide calls for #6 x 5/8 inch Phillips pan head fasteners, so drilling and driving setups can be selected to match that screw size.
The 20 inch 1805 Series slide is a 3/4 extension design, so the drawer projects partway out of the cabinet, balancing access with support during operation.
The self-closing design on the 1805Q WH 500 pulls the drawer closed at the end of travel, helping drawer fronts return to a consistent flush position against the cabinet.
The 1805Q WH 500 Knape and Vogt side mount drawer slide combines 20 inch length, 3/4 extension travel, and a self-closing design, so it suits many cabinet depths where controlled closing is important. With 1/2 inch plus, 1/32 inch minus, 0 inch each side clearance, 35.5 mm height, and a 32 mm pattern, it ties smoothly into system-bored casework. Specifying #6 x 5/8 inch Phillips pan head fasteners also aligns this euro slide with standard cabinet hardware practice, streamlining installation across multiple drawers.
Sold In: 1 Each
