Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
422STL drawer roller describes a Knape and Vogt sliding component that supports drawer or sliding door motion in sheaves and tracks applications, helping you restore smooth travel when a worn roller is slowing or hanging up a run. The 1-13/16 inch nylon roller diameter gives a predictable rolling surface, so repeated installations track consistently when you are repairing multiple units in the same job. A 5/8 inch wide roller works within narrow track profiles commonly used in light drawer and sliding door hardware, which helps keep existing clearances and reveals without reworking the opening. The nylon roller material rolls quietly and resists flat spotting in normal drawer and door service, so the action stays smoother after repeated cycles. The steel finish noted in the description refers to the metal component construction around the nylon roller, adding strength where loads transfer to the mounting point.
This nylon roller steel finish unit mounts with a #5 flat head wood screw, giving you a flush-head fastener that seats cleanly in a countersunk hole or bracket. That flat head profile lets the roller assembly sit tight to the mounting surface, which keeps the wheel aligned in the track without a proud fastener interfering with movement. The 1-13/16 inch roller diameter defines the centerline height of the moving surface relative to the mounting point, so repeating the same part across a project keeps reveal gaps and rail alignments uniform. With its 5/8 inch width working in slim tracks, the roller can be installed where the hardware space is confined, supporting straightforward replacements in existing furniture or cabinet layouts.
This 1-13/16 inch nylon roller from Knape and Vogt fits into sheaves and tracks applications such as sliding drawer-style movements and light sliding door systems, where a guided wheel rides inside a fixed track. The 5/8 inch wide roller profile suits narrow channels commonly found in compact cabinet hardware, so it works well in furniture-grade pieces and built-ins that were originally configured around slim hardware. Its nylon roller surface interacts gently with the track raceway, which supports smooth motion over typical cabinet materials while the steel finish structure carries the connection back to the case. The specified #5 flat head wood screw interface ties the assembly directly into wood-based structures such as cabinet sides or drawer components, allowing the motion system to be anchored into solid material.
The 1-13/16 inch nylon roller diameter on the 422 STL nylon roller sets a consistent rolling radius, which keeps drawer or door elevation predictable when matching multiple units along a run. That predictability helps maintain even reveals between fronts, since each roller supports the same travel height within the sheaves and tracks layout. The 5/8 inch width concentrates contact inside the track, guiding movement along a defined path and reducing side-to-side wander that can cause rubbing at case edges. Nylon as the wheel material works with the steel finish body to control both noise and strength, with the rolling element damping contact while the metal framework transfers load into the mounting screw. Using a #5 flat head wood screw allows the head to sink flush in a countersink, keeping the fastener from protruding into the track region where it could interfere with the roller path.
The 1-13/16 inch diameter on this nylon roller sets the ride height in the track, which helps keep drawer or sliding door fronts aligned when you repeat the same part across multiple openings.
The roller is 5/8 inch wide, fitting narrow track profiles so it works in compact cabinet or sliding door hardware layouts that were designed for slim sheaves and tracks components.
This unit uses a nylon roller with a steel finish structure, giving a smooth-running wheel supported by metal components that transfer load into the mounting point.
The 422 STL nylon roller mounts using a #5 flat head wood screw, so the head can sit flush in a countersunk opening and keep the roller assembly tight against the wooden surface.
This roller is specified under sheaves and tracks, fitting sliding drawer-style systems and light sliding door applications where a guided wheel runs within a fixed track.
The 422STL drawer roller is made by Knape and Vogt, placing it within a builders hardware line focused on sliding components for cabinetry and related projects.
The 422STL drawer roller from Knape and Vogt pairs a 1-13/16 inch nylon wheel with 5/8 inch width and a #5 flat head wood screw mount, giving a defined size and fastening method for sheaves and tracks work. Those fixed dimensions help you match or standardize hardware across drawers or sliding doors that share the same track style, keeping motion and reveals consistent from one opening to the next. When a project calls for a nylon roller with a steel finish structure in this size range, this part number provides a clear, repeatable choice for ongoing cabinet and sliding door jobs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KV423 Mfr# 423 STL | 1-13/16" Nylon Sliding Door Roller, Steel Finish (100/Box) |
