Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The ChemSet 732G Z-shaped stamped metal sink clips from Chemical Concepts are mounting clips used to fasten a sink to the countertop or cabinet structure during installation. The Z-profile gives the clip the offset geometry needed to bridge the sink flange and draw it tight against the counter surface.
Sink clips attach below the counter, hooking over or bearing against the sink flange while a screw draws the clip inward and pulls the sink up snug to the underside of the countertop or down onto the counter rim. The Z-profile of the 732G creates the vertical offset between the fastener plane and the contact plane, allowing the clip to reach the flange without interfering with the surrounding cabinet structure. This makes the clips particularly useful where access is limited once the counter is in place and installers need a fast, repeatable way to lock the sink in position from below.
These clips are stamped metal, which gives them a consistent shape and enough rigidity to stay set under the weight and vibration that comes with a working kitchen sink. The Z-form is a standard profile in sink installation hardware, meaning the clips fit alongside commonly used sink installation screw sets and fasteners. Because the clips are a consumable installation item, having extras on hand avoids a project stall if one is damaged or lost during the install.
Fabricators cutting countertops for drop-in sinks, cabinetmakers building and installing sink bases, and remodelers pulling out an old sink and fitting a new one all reach for clips like these as standard installation hardware. The 732G suits shops that install sinks regularly and want a reliable clip on the shelf rather than sourcing individual pieces per job. Kitchen and bath installers who work with multiple sink brands benefit from keeping a supply on hand, since the Z-profile is one of the most widely used clip geometries in the category.
The Z-profile positions one leg of the clip against the sink flange and the other against the mounting fastener, so tightening the screw pulls the sink up against the counter from below. The finished counter surface stays unobstructed.
The clip itself is material-agnostic; it contacts the sink flange and the cabinet or counter structure. Compatibility depends on the sink's flange geometry and the installer's fastener selection. Confirm the sink manufacturer's clip requirements before installing.
Pack quantity is shown in the product spec block on this page.
When the sink needs to go in clean and stay put, the right clip geometry makes the difference. The ChemSet 732G Z-shaped clip is a straight-forward, dependable piece of installation hardware for shops and installers who do this work regularly.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CZM1B37 Mfr# M1B38-1/4-20X3/4 | ChemSet No Drill Undermount Sink Fastener |