Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Blum STANDARD 230 is a 12 inch epoxy-coated roller slide built for production cabinet work — a self-closing, 3/4-extension Euro slide finished in white and designed to disappear against white melamine and laminate cabinet interiors.
A 12 inch Euro slide belongs in shallow-depth cabinet drawers: spice pull-outs, bathroom vanity drawers, base cabinets with limited interior depth, and upper cabinet rollouts. The 12 inch length suits cabinetry where a longer slide simply will not fit — the cabinet's interior depth drives the length selection before anything else. Because this slide is non-handed and sold per the Blum STANDARD 230 program, it is also a practical choice for shops standardized on Blum hardware who need a short-length filler for mixed-depth runs.
The white epoxy powder-coat is the right call when the cabinet box is white — it blends with white melamine, white thermofoil, and painted interiors so the slide does not draw the eye on open drawers. The steel body carries the roller system and gives the slide its structure; the epoxy is a color-and-corrosion finish, not a structural upgrade. Nylon rollers keep the action quiet at a price point that holds up in production volumes. This is an indoor slide for dry cabinetry — not a stainless option and not rated for exterior or high-humidity environments.
Cabinet shops running white-interior frameless or face-frame boxes reach for this slide when the drawer is shallow and the interior finish is white. Kitchen designers specifying standard-duty drawers in painted or white laminate kitchens will find the finish match straightforward. Homeowners doing a targeted vanity or bath cabinet refresh can use this slide wherever an existing 12 inch runner needs replacement — the non-handed design simplifies the swap. The self-closing ramp is standard on production residential cabinetry, so this slide fits directly into that workflow without modification.
The Motion Technology attribute lists soft-close, but the Blum STANDARD 230 is a roller slide with a self-closing ramp, not a damped soft-close mechanism. The close is positive and undamped. If you need a damped slow-down on the last inch of travel, look at Blum's BLUMOTION undermount or clip-on damper options instead.
No. This slide is non-handed — the same part installs on either side of the drawer, which simplifies ordering and cuts down on job-site sorting.
Euro roller slides typically require about 1/2 inch of side clearance per side, so build the drawer box approximately 1 inch narrower than the inside cabinet opening. Confirm the exact clearance spec in the Blum installation guide for the STANDARD 230 series.
It can, but face-frame installations require rear mounting sockets or brackets to support the back end of the slide, since the cabinet side is set back from the frame. Those components are series-specific — use Blum STANDARD 230 sockets, not generic or cross-brand hardware.
This is a 3/4-extension slide. At full open, roughly the rear quarter of the drawer stays inside the cabinet. It does not bring the entire drawer out to the cabinet face — that is full extension, a different slide class.
When the cabinet is shallow and the interior is white, the Blum STANDARD 230 in 12 inch white is the direct answer — self-closing action, a finish that disappears, and a non-handed design that keeps ordering simple.
Sold In: 25 Set