Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top Mini concealed hinge hangs full overlay doors on frameless and face-frame cabinets, sized specifically for smaller cabinet doors where a standard 35mm cup would be too large to bore without breaking through the door face.
Standard concealed Euro hinges bore a 35mm hole into the door. When the door is narrow, the stile is thin, or the cabinet is a smaller decorative or specialty piece, that bore can cut dangerously close to the door face. The 26mm cup on this hinge solves that directly: it bores a shallower, narrower recess so the door retains its integrity. The 38mm bore pattern reflects this smaller geometry and is not interchangeable with 45mm-pattern hardware. If you are replacing an existing mini hinge, confirm your bore before ordering. This hinge mounts to a separate base plate on the cabinet, sold separately, and the plate must be a Blum plate matched to this CLIP top Mini series.
The hinge is plated steel finished in nickel. For kitchens, baths, and built-ins where hardware is occasionally visible during use, the nickel finish coordinates naturally with brushed and satin metal pulls, knobs, and other visible hardware. The screw-on mount means the hinge does not depend on a cabinet having pre-drilled 5mm system holes, which keeps it at home in custom and one-off work as much as in production runs.
This hinge is the right call on smaller cabinet doors in kitchens, bath vanities, hutches, entertainment units, and furniture-grade casework where door or stile dimensions put a standard cup out of range. It works on both frameless and face-frame cabinets, and the self-close spring is a practical choice wherever a quiet-close damper is not specified but doors still need to pull shut reliably on their own. For projects where a cushioned, damped close matters more than a spring pull, the soft-close version of this series is the alternative to consider.
Smaller doors and narrower stiles do not leave room for a 35mm bore without the hole approaching or breaking through the visible door face. The 26mm cup is shallower and narrower, which keeps the bore well clear of the face on compact doors.
No. The hinge arm clips to a base plate that mounts separately to the cabinet. The plate is sold separately and must be a Blum plate matched to the CLIP top Mini series. Plates from other brands will not connect to this hinge.
No. This hinge is self-close: a spring draws the door shut over the final few degrees. Soft-close uses a damper to slow the door so it settles quietly without impact. This hinge closes reliably on its own but does not cushion the close.
Yes. Screw-on mounting fastens the base plate with standard wood screws, so pre-drilled 5mm system holes are not required.
When the job calls for a full overlay concealed hinge on a compact door and a standard cup simply will not fit, this Blum CLIP top Mini in nickel keeps the install clean and the doors closing squarely every time.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP71T0650 Mfr# 71T0650 | Blum 94 ° CLIP top Half Overlay Mini Hinge Self-Closing Screw-On 71T0650 | ||||
Sold in: 1 Each |  BP71T0750 Mfr# 71T0750 | Blum 94 ° CLIP top Inset Mini Hinge Self-Closing Screw-On 71T0750 |