Nickel Finish and Precise Fit for 30-Degree Angled Cabinets

This Blum CLIP top III angled hinge is built for cabinet openings set at a +30-degree cabinet angle, hanging overlay doors on face-frame or frameless boxes with INSERTA tool-free mounting and a self-close spring.

Key Features

• +30-degree cabinet angle geometry fits the exact diagonal opening of bay cabinets and angled casework without shimming or workarounds.
• Self-close spring pulls the door shut over the last few degrees of travel automatically.
• 95-degree opening delivers the correct swing for an angled cabinet door, keeping the door clear of adjacent panels.
• INSERTA tool-free mounting presses the base plate into pre-drilled 5mm system holes for a fast, screw-free plate install.
• Three-way adjustment provides height, side, and depth tuning after the door is hung.
• Nickel finish on plated steel coordinates with brushed and satin hardware across the cabinet run.

Engineered for the Angled Opening

A standard hinge cannot square up a door on a cabinet face that sits at an angle to the run. This hinge is built specifically for a +30-degree cabinet angle, the geometry common in bay-style kitchen layouts, diagonal corner cabinets, and angled display cases. The arm and cup work together so the overlay door hangs true on the angled face without shimming. The 35mm cup bores into the back of the door at the standard 45mm hole spacing, and the arm connects to a separate base plate mounted on the cabinet. That base plate is sold separately and must be a Blum plate matched to this series.

The 95-degree opening is correct for this application. On an angled cabinet, a wider swing would drive the door into the adjacent panel or wall. The 95-degree arc is the engineering that keeps everything clear.

Nickel Steel Built for Daily Use

The hinge body is plated steel in a nickel finish. Nickel works well as a neutral tone that reads as satin or brushed silver alongside most pull and knob finishes, which makes it a practical choice when hardware across the kitchen or bath is already specified in a similar family. The self-close spring is integrated, so no separate closing mechanism is needed. Three-way adjustment handles the fine work after the door is hung: height and side bring the door to an even reveal, and depth tuning seats it flush against the face.

Where This Hinge Belongs

Reach for this hinge when a project includes a bay cabinet, angled corner unit, or any casework where the cabinet face is set at a 30-degree angle to the adjacent run. It suits both frameless and face-frame construction, so it covers the range of cabinet types a residential or light commercial project is likely to mix. INSERTA mounting speeds up production installs on cabinets with pre-bored 5mm system holes. For a cabinet without those holes, a screw-on plate version is the right swap. Cabinet shops and contractors specifying a full angled run will want to confirm hinge count against the manufacturer load table for each door's height and weight rather than using a fixed number.

Common Questions

The Right Hinge for the Angle, Ready to Hang

When the cabinet face breaks from the run at 30 degrees, this CLIP top III hinge keeps the door square, the reveal even, and the install moving with tool-free plate mounting.