Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top angled hinge hangs full overlay doors on cabinets built at a positive 45-degree angle, such as bay cabinets and diagonal corner units, on both face-frame and frameless constructions. Self-close brings the door home on its own, and three-way adjustment keeps the reveal clean after the cabinet is set.
A standard 90-degree concealed hinge will not seat correctly on a cabinet box built at an outward angle. This hinge is engineered specifically for the +45-degree geometry: the arm and cup orientation account for the angled face so the door closes flush and swings clear without binding. It suits the diagonal corner units and bay-front cabinet runs common in kitchen design, as well as angled casework in bath vanities and entertainment centers. The 35mm cup bores into the back of the door at the standard depth, and the arm connects to a separate base plate mounted on the cabinet side or stile. That plate is sold separately and must match the Blum CLIP top series for this hinge.
The hinge is steel with a nickel finish, a finish that reads as neutral hardware on painted and natural wood cabinets alike and coordinates comfortably with a wide range of pulls, knobs, and hinges in nickel or chrome. The screw-on mount means the hinge fastens with wood screws wherever the installer needs it, whether the cabinet is a frameless box or a face-frame unit with a stile to catch. Three-way adjustment covers height, side, and depth so the door can be squared up after the cabinet is in place, not just at the bench.
Cabinet shops designing kitchen layouts with diagonal corner cabinets or angled bay fronts need a hinge that is built for the angle, not adapted from a straight-cabinet hinge. This one fits that job on either frameless or face-frame boxes. Remodelers matching existing Blum CLIP top hardware in a nickel finish will find it works directly with the plates already in the run. Because the mount is screw-on rather than pressing into pre-drilled system holes, it also works on site-built or custom cabinets that were not machined on the 32mm grid. For a quieter, damped close on the same 45-degree angle, the BLUMOTION version of this hinge is the upgrade path.
No. The +45-degree geometry is built for cabinet boxes whose face is angled outward at 45 degrees, such as bay and diagonal corner units. On a standard square cabinet, a straight 0-degree hinge is the correct choice.
No. The hinge arm connects to a separate base plate that mounts to the cabinet, and that plate is sold separately. Use a Blum CLIP top compatible plate matched to your cabinet construction and the overlay you need.
This hinge is self-close: a spring pulls the door shut over the last few degrees, but there is no cushioning. The BLUMOTION version adds an integrated damper so the door settles quietly rather than snapping shut. Both share the same +45-degree angled geometry and full overlay position.
No. Screw-on plates fasten with wood screws directly into the cabinet side or face-frame stile. System holes are only needed for INSERTA or EXPANDO plate mounting, which are different Blum plate options.
When the layout calls for a 45-degree bay or diagonal cabinet in nickel hardware, this Blum CLIP top hinge delivers the geometry, the finish, and the adjustability to get those doors hanging right.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP79T5580 Mfr# 79T5580 | Blum CLIP top 110° Full Overlay Angled Hinge 45° Self-Closing Nickel Dowel Mount 79T5580 |