Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
LYNX L100C compliant gun siphon identifies this C.A. Technologies general purpose conventional air spray gun as the L100C-18-2266 model, so installers get a defined setup for production coating work. It is described as a general purpose conventional air spray gun for spraying a wide range of coatings, which supports jobs that move between different materials without changing gun styles. The gun is designed for production use, so it is suited to repeat jobs and steady throughput on the shop floor. It is described as perfect for all coatings from thin to thick, giving flexibility when moving from light sealers to heavier build coats in the same workflow. The LYNX gun comes standard with all stainless steel fluid passages, which keeps the fluid path in one material for consistent flow characteristics over time.
The air inlet is specified as 1/4" NPS, which gives a defined thread for connecting air lines and supports straightforward hookup to typical shop air systems using that connection style. The fluid inlet is specified as 16mm x 1.5mm, giving a metric thread size that guides selection of a matching fluid source connection for secure attachment. The L100C-18-2266 configuration is described as an L100C gun with 1.8mm nozzle and 21-2266 siphon air cap, no case, which identifies it as a siphon setup, aligning it with siphon feed supply arrangements. The gun may also be used with internal mix nozzles as well as carbide tipped fluid nozzles for abrasives, so the interface is built to accept those nozzle types when matching to specific coating and abrasive spray needs.
This product is categorized as spray equipment and spray guns, and its description as a general purpose conventional air spray gun for spraying a wide range of coatings places it squarely in finishing booths and spray areas where multiple coating types move through the line. Being designed for production use means it fits continuous or repeated jobs, such as cabinet components, fixtures, or similar runs that demand regular throughput. Its description as perfect for all coatings from thin to thick means it can serve where both low-viscosity sealers and higher-build materials are sprayed on the same line. The L100C-18-2266 configuration, defined as an L100C gun with 1.8mm nozzle and 21-2266 siphon air cap, aligns it with siphon-feed setups, so it fits workflows that are already built around siphon delivery of fluid. The note that the gun may also be used with internal mix nozzles as well as carbide tipped fluid nozzles for abrasives extends its use to setups that need internal mixing behavior or to spray abrasive materials through carbide tipped fluid nozzles.
The LYNX gun comes standard with all stainless steel fluid passages, which keeps the coating movement inside stainless, supporting consistent wetted surfaces as coatings move through the gun during repeated cycles. Self-adjusting needle and air valve packing are specific design elements, and this self-adjusting behavior keeps sealing forces at those points without manual tweaking at each interval, supporting a more predictable trigger pull and reduced change in feel across shifts. An air adjusting valve is listed in the description, so fan and atomization air can be tuned directly on the gun body to suit different coatings in the wide range of materials this gun is intended to spray. The fact that the gun may also be used with internal mix nozzles gives flexibility in atomization style, which matters when fine-tuning pattern and mixing behavior inside the air stream. The ability to use carbide tipped fluid nozzles for abrasives means the gun body interfaces with nozzle options built for abrasive materials, supporting work that involves coatings or media with abrasive content while maintaining a compatible fluid end. Together, these details define a tool built for repeatable spray behavior, adaptable to different nozzles and coating demands in production environments.
The L100C-18-2266 is described as a general purpose conventional air spray gun, so it serves as a versatile tool for varied coating work in a spray environment.
This configuration is described as an L100C gun with 1.8mm nozzle and 21-2266 siphon air cap, no case, identifying it as a siphon-oriented setup with that specific nozzle and air cap.
The gun is described as perfect for all coatings from thin to thick, so it is intended for use across light-bodied materials and heavier coatings in the same tool.
The air inlet is specified as 1/4" NPS and the fluid inlet as 16mm x 1.5mm, giving clear connection sizes for air supply and fluid feed line matching.
The L100C description notes self-adjusting needle and air valve packing, which keep these seals dynamically set, supporting smoother operation during extended use.
The gun may also be used with internal mix nozzles and carbide tipped fluid nozzles for abrasives, so it adapts to different atomization and abrasive material needs.
The L100C-18-2266 brings together a general purpose conventional air spray gun design, a defined 1.8mm nozzle with 21-2266 siphon air cap, and all stainless steel fluid passages, creating a tool aligned with production use. Its ability to spray a wide range of coatings, from thin to thick, backed by self-adjusting needle and air valve packing and an air adjusting valve, supports consistent performance across changing jobs. For shops needing a siphon-oriented C.A. Technologies L100C configuration that can also work with internal mix nozzles and carbide tipped fluid nozzles for abrasives, this model offers a clearly specified option ready to match those requirements.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CX10-106 Mfr# 10-106 | Lynx 300C Repair Kit 10-106 C.A. Technologies |
