
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune Tallman W-Type Pull Down Closet Rods provide a pull down closet rod solution that brings hanging space down to a reachable height while returning it to the upper zone when finished. The double-type model design anchors to two side walls of a cabinet or closet, so the load transfers directly into the case sides for a solid feel during use. The pull down has soft-close features that slow the return and prevent the rod from popping back up quickly, even if released before the rod is fully pulled down, which helps protect stored garments and the mechanism. The rod length adjusts in just one step, so the same unit adapts to different cabinet widths on a run or during layout changes. This pull down works in cabinets with width openings ranging from 31-1/2 inches to 46-7/16 inches, covering a wide span of standard closet sections. The Tallman closet rod lift mechanism delivers a 33 lb weight capacity, supporting typical clothing loads when installed in that size range.
The Tallman closet rod lift mechanism is built as a double-type model for installation to two side walls of a cabinet or closet, so layout starts by setting accurate side wall locations. Because the pull down can be used in cabinets with width openings ranging from 31-1/2 inches to 46-7/16 inches, installers can frame or size sections anywhere within that span and still use this unit. Adjusting the length of the rod is easily done in just one step, which streamlines fit-up compared to multi-part or cut-to-length approaches. The pull down has soft-close features that prevent the rod from popping back up quickly, even if released before the rod is fully pulled down, so the motion remains controlled while checking clearances around doors or trim. The 33 lb weight capacity defines the hanging load that the mechanism is designed to handle within that specified width range.
This Tallman W-type pull down closet rod is part of the pull down closet rods class, so it fits projects where upper hanging space needs to be brought down to reach. The double-type model is designed for installation to two side walls of a cabinet or closet, which works well in framed or frameless sections that provide solid side walls for mounting. Because this pull down can be used in cabinets with width openings ranging from 31-1/2 inches to 46-7/16 inches, it fits a variety of common closet bay widths in both custom and modular layouts. The adjustable rod length, set in just one step, means one TAW-1200/G unit can cover multiple opening sizes within that range across a walk-in or reach-in closet. With a 33 lb weight capacity, the mechanism supports typical daily clothing loads in that width band, so it suits standard hanging zones rather than unusually heavy-duty storage.
The soft-close feature is built into the pull down so the rod does not pop back up quickly, even if released before being fully pulled down, which keeps the return stroke controlled while working near doors, face frames, or adjacent hardware. That controlled motion reduces sudden shocks into the cabinet side walls, helping the installation maintain alignment under normal operation. The ability to adjust the length of the rod in just one step turns the pull down closet rods adjustable design into a time-saver, because installers can fine-tune the span after the unit is in place without cutting metal. The wide usable cabinet opening range from 31-1/2 inches to 46-7/16 inches lets the Sugatsune pull down closet rod serve as a standard solution across multiple closet sections, simplifying planning and ordering. With the Tallman closet rod lift mechanism rated at 33 lb weight capacity, loading expectations are clearly defined, so hanging plans can be built around that rating. The availability of gray and umber finishes gives flexibility to match the pull down with other closet organization components from the same project.
The Tallman closet rod lift mechanism can be used in cabinets with width openings ranging from 31-1/2 inches to 46-7/16 inches, so it covers a broad span of typical closet section widths.
The Sugatsune Tallman pull down closet rod is a double-type model designed for installation to two side walls of a cabinet or closet, so it mounts directly into the case sides.
The TAW-1200/G pull down rod has a 33 lb weight capacity, which defines the clothing load it is designed to support across its specified width range.
The pull down has soft-close features that prevent the rod from popping back up quickly, even if released early, keeping movement controlled during everyday use.
The length of the rod adjusts easily in just one step, allowing the same unit to be set to different cabinet openings within the 31-1/2 to 46-7/16 inch range.
The Sugatsune Tallman W-type pull down closet rod is available in gray and umber finishes, allowing selection that coordinates with the closet interior.
The Sugatsune Tallman W-Type Pull Down Closet Rods TAW-1200/G model combines a double-type design for installation to two side walls with a 31-1/2 to 46-7/16 inch usable cabinet opening range, so one unit fits many closet layouts. Its one-step adjustable rod length and 33 lb weight capacity support straightforward planning of hanging zones. The soft-close feature, which prevents the rod from popping back up quickly, adds controlled movement that suits residential and light commercial storage. With gray and umber finish options, this Tallman closet rod lift mechanism integrates cleanly into closet and cabinet projects that need reachable upper hanging space.
Sold In: 1 Each