Festool antistatic Y-connector is a Y-adapter that lets you connect two suction hoses at once to your dust extractor, so you can keep two tools plumbed into the same extractor and reduce hose swapping between tasks. The adapter uses antistatic components as part of an antistatic dust extraction system, helping control dust movement through the hoses which supports cleaner, more predictable dust collection performance around woodworking tools. The design includes a blanking plug that caps off an unused inlet, so the full suction from the extractor stays focused on the active line instead of bleeding off through an open branch. The product is identified by manufacturer part number 452898, which helps match this specific Y-piece when ordering or replacing parts in an existing Festool dust extraction setup.
This Y-piece is described as an antistatic Y-Adapter for dust extractor suction hoses, so it is intended to sit between the dust extractor and two connected hoses in a shop dust collection run. Connecting two hoses at once to the extractor lets the operator route one hose to each work position, then engage the desired branch by leaving that side open while the other side is sealed with the supplied blanking plug. Capping the idle branch with the blanking plug directs the extractor airflow through the active hose leg, which supports stronger pickup at the working tool and avoids wasting airflow into an unused line.
The Y-PIECE W/BLANKING PLUG with manufacturer part number 452898 sits in the dust collection circuit as a branch point between a Festool dust extractor and two suction hoses, giving a single extractor two hose connection options. Because it is an antistatic Y-Adapter, it is intended to work as part of a complete antistatic dust extraction system that includes extractors or vacuums, hoses, sleeves, and couplings, so it ties directly into the same hose network as other antistatic components. In day-to-day use this lets a shop assign one hose to one workstation and a second hose to another, while still running dust collection through the same extractor body to consolidate extraction equipment on the floor.
The antistatic Y-adapter construction is described as using antistatic components within a complete antistatic dust extraction system, which is important because that system approach manages dust and material movement through the hoses in a controlled way. When the blanking plug is placed on the unused inlet, the open path is limited to the active hose, which keeps the extractor suction focused instead of splitting airflow between branches. That focused airflow helps the connected tool draw more dust into the hose during cutting or sanding, which supports cleaner work surfaces and helps maintain extractor efficiency. Using a single Y-Adapter with blanking plug also simplifies the hose routing compared with separate improvised branches, which reduces connection changes during a shift and helps keep the dust collection layout repeatable in a busy woodworking environment.
The Festool antistatic Y-connector connects two suction hoses at once to a dust extractor, so one extractor can serve two hose runs while staying in a single location in the shop.
The blanking plug caps the unused inlet on the Y-piece, directing the full suction to the active hose branch and avoiding airflow loss through an open leg.
The Festool 452898 Y-piece is used between the dust extractor and two suction hoses as a branching connector in the dust extraction line.
The Y-adapter uses antistatic components that are designed to function as part of a complete antistatic dust extraction system with compatible extractors, hoses, sleeves, and couplings.
Connecting two suction hoses to one extractor lets tools at separate positions stay plumbed in, so switching workstations can be done without moving the extractor.
The manufacturer part number 452898 uniquely identifies this Festool Y-PIECE W/BLANKING PLUG, helping match the exact adapter when ordering or reordering.
The Festool antistatic Y-connector with blanking plug is designed for connecting two suction hoses at once to a dust extractor, so a single extractor can serve multiple hose runs. Its antistatic components are intended for use within a complete antistatic dust extraction system that includes extractors or vacuums, hoses, sleeves, and couplings, aligning with dedicated dust collection layouts. The blanking plug keeps suction focused on the active hose branch when only one line is open, which supports effective pickup at the tool. For shops building or refining a Festool-based dust extraction setup, this identified 452898 Y-piece gives a defined way to branch extractor suction between two hose locations.
Sold In: 1 Each