Berenson Transitional Advantage Three Series 3-3/4" (95 mm) Center to Center Polished Chrome Pull, - 0991-126-P

Berenson Transitional Advantage Three Pull For Cabinets

Berenson Transitional Advantage Three pull is a zinc die cast handle designed to give cabinets a defined gripping point, which helps doors and drawers operate consistently in everyday use. The pull is part of the Advantage Series, so it follows a coordinated design language across that collection, which matters when matching multiple handles in the same space. A polished chrome finish reflects light on the front of the pull, which keeps the hardware visually sharp against painted or stained cabinet faces. The center to center measurement of 3-3/4 inches, or 96 mm, sets the spacing for the mounting holes, which is important when laying out new drilling or aligning with existing holes. An overall length of 5 inches gives enough hand contact area, which supports a steady grip on larger drawer fronts. A projection of 1-3/16 inches stands the pull off the surface, providing finger clearance between the cabinet face and the hardware.

Key Details That Support Cabinet Hardware Layout

• The center to center dimension of 3-3/4 inches (96 mm) defines the exact hole spacing, which streamlines drilling templates and helps keep multiple pulls aligned across doors and drawers.
• The 5 inch overall length sets the visible width on the cabinet front, which helps plan proportions on narrow doors, wide drawers, and banks of aligned hardware.
• The polished chrome finish establishes a bright, reflective surface, which works well in designs that call for clean metal highlights on face frames or full overlay fronts.
• The zinc die cast material provides a solid metal body, which supports daily grabbing force on doors and drawers throughout typical residential or light commercial use.
• The base diameter of 1/2 inch defines the footprint where the pull meets the surface, which is useful when covering previous marks or coordinating with edge profiles.
• The 9/16 inch width across the grip determines the front profile, which affects how the pull feels in the hand and how far it reads visually on the cabinet face.

Mounting Details For 3-3/4 Inch Center Spacing

The center to center dimension of 3-3/4 inches on this Berenson Transitional Advantage Three pull dictates the distance between the two mounting points, which guides drilling before installation. The specified 96 mm metric reference lines up with common jig markings, which simplifies layout when working in either inch or metric systems. A projection of 1-3/16 inches locates the grip away from the cabinet surface, which gives fingers room behind the pull during everyday opening and closing. The 9/16 inch width defines the thickness of the handle as viewed from the front, which influences how tightly the pull can sit between adjacent doors without visual crowding. A base diameter of 1/2 inch sets the circular contact area at each end, which helps cover typical pilot hole breakout around the fastener locations on the front face.

Using This Polished Chrome Pull In Real Projects

Where This Advantage Series Pull Fits Best

The Advantage Series designation ties this Berenson pull to a larger family of decorative hardware, which is useful when the same style is needed across kitchens, baths, or built-ins. With an overall length of 5 inches, the pull sits comfortably on standard cabinet doors as well as medium-width drawer fronts, which helps keep proportions balanced on face frame or frameless constructions. The 3-3/4 inch (96 mm) center to center dimension matches a widely used mounting size, which supports projects that rely on common drilling patterns or existing hole layouts. A polished chrome finish gives a clear, metallic look, which pairs well with appliance trims and other chrome elements in a room. The 9/16 inch width across the handle provides a slim front profile, which works on narrow rail sections where larger pulls could visually dominate. A projection of 1-3/16 inches keeps the hand clear of door edges and profiles, which is useful on thicker fronts or applied moldings.

Details That Support Consistent Cabinet Results

The zinc die cast construction of this Berenson Transitional Advantage Three pull creates a unified metal body, which helps each pull feel the same across an entire bank of cabinets. The 3-3/4 inch center to center hole spacing keeps fasteners positioned near the ends of the 5 inch length, which distributes pulling force and supports long-term use on frequently opened drawers. A base diameter of 1/2 inch localizes the contact at each end, which defines a consistent landing point against the finish when multiple pulls are lined up in a row. The 9/16 inch width and 1-3/16 inch projection work together to shape the gripping area, which supports repeatable hand placement from cabinet to cabinet. The polished chrome finish covers the full exterior surface, which provides a uniform appearance when the same pull is repeated along an entire run of cabinetry. The specified Advantage Series identity also ties back to the manufacturer, which helps match this model to the 0991-126-P part number on drawings or cut lists.

Common Questions About The Berenson 0991-126-P Pull

Selecting This Pull For Your Next Cabinet Run

The Berenson Transitional Advantage Three pull combines a 3-3/4 inch (96 mm) center to center layout, 5 inch overall length, and 1-3/16 inch projection, which collectively define how it will sit and function on doors and drawers. Its zinc die cast construction and polished chrome finish establish both the feel and appearance of the hardware, which is important when repeating the pull across a full room of cabinets. With the 0991-126-P part number and defined base and width dimensions, this pull can be specified clearly on plans or order lists for consistent results from layout through final installation.