Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Stanley pivot hinge 180 degree screw-on design provides a pivoting solution for overlay doors 1-3/8 inch to 1-3/4 inch thick, so it fits a common range of heavy doors on built-ins and architectural openings. The hinge is made from extra heavy gauge steel, which supports doors up to 150 lb and helps the hinge stand up to the stresses of repeated door movement in high-use areas. Bearings take both vertical and lateral loads, so the door weight and side forces are carried by the hinge rather than the frame edge, reducing wear on the surrounding construction. Doors can be installed floor to ceiling with this hinge, allowing tall door designs where continuous coverage or full-height access is required. The hinge offers a full 180 degree opening, so doors can swing completely clear of the opening for maximum access.
This Stanley Hardware semi-concealed hinge is a screw-on style, so it is fastened directly through the provided screw holes into the door and frame structure for a solid mount. Screw holes allow both vertical and horizontal adjustment, giving the installer the ability to shift the door position up, down, or sideways relative to the opening. That adjustment range helps align overlay doors evenly across a bank of openings and helps fine-tune reveals after the door weight is carried on the bearings. The hinge supports a full 180 degree swing, so clearances can be set knowing the door will open completely without binding at standard overlay positions.
This hinge is designed for overlay doors 1-3/8 inch to 1-3/4 inch thick, so it suits heavier overlay applications where a pivot action is desired rather than a traditional butt hinge. With a capacity of up to 150 lb, the hinge supports substantial doors such as tall overlay panels or solid-core styles that need dependable support. Because doors can be installed floor to ceiling with this hinge, it plays well in full-height closets, storage walls, or architectural room dividers that extend from floor level to ceiling line. The semi-concealed design keeps part of the hardware out of direct view when the door is closed, which supports cleaner faces on overlay installations while still giving access to the pivot geometry at the edge.
The use of extra heavy gauge steel in this Stanley Hardware pivot hinge contributes to stiffness under load, which helps doors up to 150 lb stay aligned through repeated swings. Bearings that take both vertical and lateral loads carry the door weight and side forces together, reducing stress on the mounting surfaces and supporting smoother motion over time. Screw holes that allow both vertical and horizontal adjustment give room to correct for small drilling variances or material movement, so reveals and overlays can be brought into line after hanging. The full 180 degree opening allows the hinge to swing the door completely clear of the opening, which is useful when planning clearances for adjacent cabinetry or nearby walls. The set is non-handed, meaning one hinge style serves both left- and right-hand swings, which simplifies stocking and reduces the chance of selecting the wrong orientation during door layout.
This Stanley Hardware pivot hinge is for overlay doors 1-3/8 inch to 1-3/4 inch thick, so it covers many standard interior and cabinet-style overlay door builds.
The hinge is rated for doors up to 150 lb, which supports heavy or tall overlay doors that need a strong pivot point.
The full 180 degree opening allows the door to swing completely clear of the opening, helping provide maximum access across the full width.
This hinge uses a screw-on installation through the screw holes into the structure, providing a direct mechanical connection for the pivot.
The set is non-handed, so the same hinge style works on both left-swing and right-swing doors in a layout.
Bearings that take both vertical and lateral loads support the door weight and side forces, promoting smooth motion and helping maintain alignment.
The Stanley Hardware semi-concealed pivot hinge, part number 711350043, combines extra heavy gauge steel with bearings that carry vertical and lateral loads, so heavy overlay doors are well supported. Its 1-3/8 inch to 1-3/4 inch overlay door range and up to 150 lb capacity make it suitable for tall or substantial doors that must open a full 180 degrees. With screw holes that allow vertical and horizontal adjustment and a non-handed set configuration, this hinge serves both left- and right-swing layouts while supporting precise alignment in finished installations.