Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Markham 24" towel bar from Amerock Corporation is a bath hardware bar designed for hanging towels in residential or commercial baths. The bar belongs to the Builders Hardware and Bath Hardware category, so it fits into standard bath layouts where coordinated hardware is specified. With an overall length of 26-1/3 inches, the bar spans a wider section of wall than the 24 inch hanging width, giving room for mounting posts on each side. The 24 inch center to center dimension sets the post spacing, which matters when laying out drilling points on finished walls or tile. An overall width of 2-1/3 inches defines the vertical footprint, helping plan around mirrors, trim, and adjacent fixtures. The 3 inch projection establishes how far towels stand off the wall during use, which helps airflow around hanging towels and keeps them clear of wall surfaces.
This Markham 24 inch towel bar uses a 24 inch center to center dimension between posts, so installers can transfer that spacing directly to wall marks before drilling. The 26-1/3 inch overall length then helps confirm that the bar will fit inside the available span without conflicting with corners or trim. With a 3 inch projection, the bar stands off the wall enough to hang folded or full-size towels without compressing them tightly against the surface, which supports everyday handling. The 2-1/3 inch overall width defines how the bar presents visually on the wall, which matters when aligning with other Amerock bath hardware in the same space.
This Amerock Markham 24 inch towel bar, identified by part number BH26514PN, is built for bath hardware applications where a full-size bar is needed for towels. The 24 inch center to center hanging width suits standard bath layouts that call for a single bar to hold bath or hand towels along a straight wall. With an overall length of 26-1/3 inches, the bar fits well on runs of wall that allow a bit more than two feet of clear space, making it practical near showers, tubs, or vanities. The 3 inch projection provides space for towels to hang away from painted drywall, tile, or other finished surfaces, which is useful in everyday bath use. Its categorization under Builders Hardware and Bath Hardware ties the bar directly to construction and remodeling projects where coordinated hardware is specified across multiple rooms.
The defined 24 inch center to center dimension on this Markham 24" towel bar gives installers a precise spacing standard, which helps repeat the same layout across multiple baths in a project. Knowing the overall 26-1/3 inch length ahead of time allows accurate planning when arranging several bars along a corridor or in a shared bath, reducing rework from tight clearances. The 2-1/3 inch overall width helps keep visual lines consistent when aligning this bar with other Amerock bath hardware pieces, such as matching fixtures specified from the same program. The 3 inch projection is equally important, since a consistent stand-off depth supports a uniform look and similar towel clearance from wall to wall. The Amerock Corporation branding and BH26514PN part number support ordering and documenting this exact bar when creating hardware schedules or replenishing stock for service work.
The Markham 24" towel bar has a 24 inch center to center dimension, which sets the usable hanging width for towels and establishes the post spacing on the wall.
The BH26514PN towel bar has an overall length of 26-1/3 inches, so it occupies just over two feet of horizontal wall space when installed.
This Amerock Markham towel bar has a 3 inch projection, creating space for towels to hang away from the wall surface during everyday bath use.
The towel bar has an overall width of 2-1/3 inches, which defines its vertical footprint and helps coordinate with nearby fixtures or trim.
This Amerock Markham bar is classified under Builders Hardware and Bath Hardware, aligning it with typical construction and remodeling specifications.
The BH26514PN part number uniquely identifies this Markham 24" towel bar, simplifying reorders, documentation, and matching in project hardware schedules.
The Markham 24" towel bar from Amerock Corporation offers a clearly defined 24 inch center to center mounting width, which supports consistent layouts across multiple baths. Its 26-1/3 inch overall length, 2-1/3 inch width, and 3 inch projection provide dependable dimensions for planning hardware positions around showers, tubs, and vanities. With its role as Builders Hardware and Bath Hardware, this BH26514PN bar fits directly into bath hardware schedules where precise sizes and repeatable installation details matter.
Sold In: 1 Each
