Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Clarendon Series zinc robe hook gives a defined spot for robes or towels using a compact 2-13/16 inch length body, so it mounts where wall space is tight but a solid hanging point is still needed in the bath area. The satin nickel finish presents a neutral, modern look that works with a wide range of bath hardware while helping the hook visually blend into both light and dark wall surfaces. The robe hook is part of the Amerock Corporation Clarendon collection, which allows the hook to follow the same visual line as other pieces from the same series in a bath layout. As bath hardware, this hook aligns with typical builders hardware expectations, giving a dedicated hanging point that helps keep robes and towels off the floor and organized around the bath.
The Clarendon Series zinc robe hook uses 8-32 x 1 inch screws for attachment, so installers work with a common machine screw size when fastening into appropriate anchors or backing in bath walls. With a 2-13/16 inch length, the hook body stays short, which allows it to sit cleanly on narrow sections of finished wall where a longer hook could conflict with trim or adjacent fixtures. The 2-15/16 inch projection defines the standoff from the wall, helping set a repeatable spacing that leaves room behind hanging robes or towels. At 3/4 inch width, the hook occupies only a slim vertical lane, so multiple hooks from the same Clarendon collection can be lined up along a wall while keeping an even visual rhythm.
This Clarendon Series zinc robe hook from Amerock Corporation is categorized as bath hardware, which directs it toward use in bathrooms, powder rooms, and similar wet-adjacent spaces. The satin nickel finish helps the hook coordinate with common satin nickel faucets, shower trim, and cabinet pulls, so it can sit on the same wall plane without clashing. Because the length is 2-13/16 inches and the width is 3/4 inch, the hook suits small wall returns next to shower doors, behind entry doors, or between mirrors and cabinets. The 2-15/16 inch projection provides predictable clearance from the wall, which helps builders and remodelers lay out multiple hooks at equal heights while keeping enough room for bulky robes. Being part of the Clarendon collection, this robe hook lets designers repeat the same visual language by pairing it with other Clarendon pieces in the bath space.
The defined 2-13/16 inch length and 3/4 inch width give installers exact outer dimensions to work with when planning stud locations, backing, or tile cuts, supporting cleaner alignment with adjacent trim. The 2-15/16 inch projection determines how far robes or towels will sit from the wall, which helps reduce bunching against surfaces and supports more even drying. Using specified 8-32 x 1 inch screws standardizes the mounting interface, so installers can select matching anchors or pre-tap metal blocking to suit that thread and length. The satin nickel finish on a zinc body ties appearance and material together, helping the hook visually link with other satin nickel bath hardware while the zinc construction supplies a defined structure for everyday hanging loads. As part of builders hardware and bath hardware categories, this Amerock Clarendon robe hook fits into planned hardware schedules where part number BH26502G10 identifies the exact style and finish needed for repeat orders.
The Clarendon Series zinc robe hook measures 2-13/16 inches in length, 2-15/16 inches in projection, and 3/4 inch in width, which helps plan spacing on bath walls.
The BH26502G10 robe hook projects 2-15/16 inches from the wall, setting consistent clearance so robes and towels hang away from the surface.
The Amerock Clarendon robe hook uses 8-32 x 1 inch screws, giving a standard machine screw thread and length for bath hardware mounting.
The Clarendon robe hook is made from zinc with a satin nickel finish, matching the SAP description as a satin nickel robe hook for bath use.
This zinc robe hook is categorized as bath hardware, positioning it for use on bathroom or powder room walls near showers, tubs, or doors.
The Clarendon series designation means this robe hook belongs to Amerock's Clarendon collection, supporting coordinated styling with other Clarendon bath pieces.
The Clarendon Series zinc robe hook in satin nickel from Amerock Corporation pairs defined dimensions with a known part number, BH26502G10, which supports consistent specification on bath projects. With its 2-13/16 inch length, 2-15/16 inch projection, and 3/4 inch width, the hook offers predictable sizing that fits typical bathroom layouts. The 8-32 x 1 inch screw callout, zinc material, and satin nickel finish align it with standard bath hardware practices, making this Clarendon robe hook a practical choice when a compact, satin nickel hanging point is needed.
Sold In: 1 Each