Clarendon 18 Towel Bar describes a bath towel bar from the Clarendon Bath Hardware Collection that is designed for standard bathroom installations where an 18 inch hanging width is desired. The product is part of the Amerock Corporation bath hardware line, so it aligns visually with other Clarendon Bath Hardware Collection pieces during coordinated bath upgrades. The bar has an 18 inch center to center dimension, which sets bracket locations and guides drilling or blocking layout on the wall. Overall length is 19-3/4 inches, giving you a clear idea of space needed on the wall between adjacent fixtures. The bar has a projection of 3 inches, which sets how far towels stand off the wall and affects clearance in tighter bathrooms. Overall width is 2-5/6 inches, which defines the vertical footprint against the wall surface during layout.
The 18 inch center to center dimension on this Amerock Clarendon towel bar fixes the distance between mounting points, which streamlines layout on tile or drywall when transferring measurements from drawings. The 19-3/4 inch overall length tells you the actual edge-to-edge span, helping position the bar relative to corners or other hardware without crowding. With a 3 inch projection, the towel bar stands off the wall enough to hold folded towels while defining how close it sits to doors or adjacent fixtures. The 2-5/6 inch overall width defines the vertical area covered on the wall, so installers can align the bar consistently with other Clarendon Bath Hardware Collection pieces for a clean visual line.
This Amerock Corporation towel bar, identified as BH2650326, is part of the Clarendon Bath Hardware Collection and is intended for bath hardware applications where an 18 inch hang space is appropriate. Its 18 inch center to center layout works well on typical residential bathroom walls where space between a vanity and adjacent wall is limited, allowing a practical towel width without overpowering smaller rooms. The 19-3/4 inch overall length helps fit the bar between mirrors, outlets, or trim pieces while still leaving space for other bath hardware along the same wall. The 3 inch projection makes sense near walkways beside vanities, because it defines how far the bar enters the room and whether it stays clear of knees and hips. The polished chrome appearance described in the product name supports use in bathrooms that already feature polished chrome faucets and shower trim, keeping finishes consistent across the project.
The 18 inch center to center dimension on this Clarendon Bath Hardware Collection towel bar offers a predictable drill pattern, which speeds work when repeating the same layout across multiple bathrooms in a project. By knowing the 19-3/4 inch overall length, installers can center the bar precisely on a feature wall or align it with a sink, helping keep bath hardware lines straight from room to room. The 3 inch projection sets how far the bar stands off tile or finished drywall, which helps avoid interference with adjacent doors or shower glass when plans call for tight clearances. The 2-5/6 inch overall width defines how much vertical wall area the escutcheons occupy, making it easier to relate the bar to grout joints, chair rails, or wainscoting caps for a clean finished look. Using the Amerock Corporation manufacturer part number BH2650326 on drawings or pick lists keeps the towel bar specification clear, reducing mix-ups with other Clarendon Bath Hardware Collection sizes during ordering or installation.
The Amerock Clarendon 18 inch towel bar has an 18 inch center to center mounting span, which sets bracket spacing and guides drilling on the finished wall.
The BH2650326 towel bar has a 19-3/4 inch overall length, so it occupies just under 20 inches of horizontal wall space between adjacent surfaces or fixtures.
The Amerock Clarendon 18 inch towel bar has a 3 inch projection, setting the distance towels stand off the wall and affecting clearance in narrow areas.
This Clarendon Bath Hardware Collection towel bar has a 2-5/6 inch overall width, defining its vertical footprint when aligning with grout lines or trim.
The towel bar is from the Clarendon Bath Hardware Collection by Amerock Corporation, so it coordinates with other Amerock Clarendon bath hardware pieces.
This bath hardware towel bar is identified by manufacturer part number BH2650326, which simplifies matching to specifications, takeoffs, and future reorders.
This Amerock Corporation Clarendon Bath Hardware Collection 18 inch towel bar combines an 18 inch center to center span with a 19-3/4 inch overall length, giving installers clear dimensions for planning wall layouts. The 3 inch projection and 2-5/6 inch overall width define how the bar occupies space in front of and against the wall, supporting confident placement alongside vanities, mirrors, and other bath hardware. With the BH2650326 identifier and polished chrome appearance in the product name, this towel bar fits projects calling for coordinated Amerock Clarendon bath components in a polished chrome look. Use these verified measurements and identifiers to line up your bath hardware runs, match finish across the room, and keep ordering aligned with your drawings.
Sold In: 1 Each