Clarendon 24" Towel Bar, Polished Chrome

Clarendon 24" Towel Bar For Bath Installations

Clarendon 24" Towel Bar defines the product as a 24 inch bar designed for bath use, so installers get a clear fit target when planning towel placement on residential or light commercial projects. The Amerock Corporation branding ties this bar to a recognized bath hardware manufacturer, which helps standardize product selection across a job when matching other Amerock bath pieces. The polished chrome description identifies the surface finish, giving designers and remodelers a straightforward way to coordinate this bar with chrome faucets and trim across the room. The product is classified as bath hardware under builders hardware, so it is intended for bathroom mounting and not for heavier-duty wall-hung loads elsewhere. The Clarendon 24" Towel Bar configuration focuses the bar on holding bath towels at a convenient reach distance, supporting typical bath layouts where a full-size towel needs space to hang and dry properly.

Key Clarendon 24" Towel Bar Details

• The overall length of 25-3/4 inches means the Clarendon 24" Towel Bar spans more wall space than the 24 inch hanging width, which helps cover minor layout imperfections while still fitting common stud spacing patterns.
• The 24 inch center to center dimension specifies the mounting point spread for the Clarendon 24" Towel Bar, allowing accurate hole layout before tile, panel, or wall finish work is completed.
• The overall width of 2-5/6 inches defines how far the Clarendon 24" Towel Bar projects vertically on the wall surface, which helps plan clearances near mirrors, trim, or other bath hardware pieces.
• The 3 inch projection from the wall sets how far towels hang out from the surface on the Clarendon 24" Towel Bar, giving towels space for airflow while limiting interference with doors or nearby fixtures.
• The BH2650426 manufacturer part number identifies this exact Clarendon 24" Towel Bar configuration, so purchasing and site crews can reference the same item across orders, schedules, and installation lists.

Mounting Dimensions For Clarendon 24" Towel Bar

The 24 inch center to center mounting measurement on the Clarendon 24" Towel Bar translates directly into bracket positioning on the wall, giving installers a fixed dimension to transfer from drawings to the jobsite. The 25-3/4 inch overall length confirms the footprint of the bar and decorative ends, which matters when locating the bar between trim, cabinets, or adjacent bath hardware pieces. The 3 inch projection value defines how far the towel bar extends into the room, helping layout work in narrow baths where clear walkway width is important. The 2-5/6 inch overall width helps position the bar vertically so it lines up cleanly with other components while maintaining enough room above and below for towels to drape without bunching.

Using This Amerock Bath Hardware On Projects

Where This Bath Hardware Bar Fits Best

The Clarendon 24" Towel Bar, identified as bath hardware from Amerock Corporation, is suited to standard bathroom walls where a full-size towel needs a 24 inch hanging span. The bar falls under builders hardware and bath hardware categories, so it matches typical residential and light commercial bathroom scopes where coordinated finishes are important. The polished chrome finish helps this bar integrate into projects that already specify chrome faucets, shower trim, and bath accessories, supporting a consistent visual line across the room. With an overall length of 25-3/4 inches, the bar fits well on medium-width wall sections beside vanities, between a shower enclosure and a door casing, or on tub walls that allow at least that clear span. The 3 inch projection keeps the bar functional in tighter bathrooms where extra clearance is valuable, while still leaving space so towels do not rest flat against the wall surface.

Why These Dimensions Support Repeatable Results

The 24 inch center to center mounting dimension on the Clarendon 24" Towel Bar provides a fixed reference that can be repeated across multiple baths in a project, keeping all towel bars aligned and simplifying layout templates for the field crew. The 25-3/4 inch overall length adds predictable end-cap extension beyond the mounting points, which helps installers align the bar visually with tiles, grout lines, or nearby fixtures without trial-and-error. The 2-5/6 inch overall width sets a consistent visual band on the wall, which matters when several Clarendon 24" Towel Bars or other Amerock bath hardware pieces are installed along the same elevation. The 3 inch projection creates a known stand-off from the wall, so designers can count on enough depth for rolled or folded towels while still respecting clearance guidelines near doors or passageways. The BH2650426 part number keeps purchasing, warehouse, and field teams aligned on the same towel bar, reducing mixups when reordering for add-on bathrooms or future refresh work.

Clarendon 24" Towel Bar Buyer Questions

Select Clarendon 24" Towel Bar For Defined Layouts

The Clarendon 24" Towel Bar from Amerock Corporation offers a 24 inch center to center mounting span with a 25-3/4 inch overall length, giving installers clear layout information for bath walls. The polished chrome finish coordinates with standard chrome bath hardware, helping maintain consistent appearance on multi-room projects. With a 3 inch projection and 2-5/6 inch overall width, the bar provides defined clearances around towels and nearby fixtures. Using the BH2650426 part number, project teams can align specifying, purchasing, and field installation on this specific Clarendon 24" Towel Bar when outfitting new or updated bathrooms.