Clarendon 24" Towel Bar, Oil-Rubbed Bronze

Clarendon 24 Towel Bar For Bath Use

Clarendon 24 Towel Bar identifies this Amerock Corporation bath hardware as a 24 inch bar sized for typical bath towel hanging, which helps installers and buyers match the bar length to the wall space and towel width in real rooms. The product name states that the bar length is 24 inches, so the working hanging span supports standard bath towel widths without crowding side walls when laid out correctly. The same name specifies that this bar is part of the Clarendon line, which allows projects that already use Clarendon bath hardware to keep a consistent style from one fixture to the next across a bathroom. The product category lists this bar as Builders Hardware and Bath Hardware, so it fits naturally into professional bathroom builds or remodels where coordinated bath components are ordered together.

Key Clarendon 24 Towel Bar Details

• The overall length of 25-3/4 inches means the installed footprint extends beyond the 24 inch center to center, which matters for locating studs or anchors against adjacent walls, trim, or other fixtures on a finished bath wall.
• The center to center dimension of 24 inches defines the mounting hole spacing, so installers can pre-lay anchor points, drill locations, or blocking layouts with confidence that the brackets will line up during final mounting.
• The projection of 3 inches sets how far the towel bar stands off the wall, which creates clearance behind hanging towels so they dry more effectively and do not rub continuously against painted or tiled surfaces.
• The overall width of 2-5/6 inches describes the vertical footprint of the bar and support brackets, which helps determine whether the hardware will visually balance within narrow wall sections or between elements like mirrors and switches.
• The oil-rubbed bronze description in the product name defines the visual finish of the bar, which supports matching this piece with other oil-rubbed bronze bath hardware on the same project for a unified appearance.

Amerock Clarendon Bar Mounting Dimensions

The stated center to center distance of 24 inches is the critical mounting dimension for the Amerock Corporation Clarendon bar, because it dictates the horizontal separation of the wall contact points that carry the load of wet or dry towels. With an overall length of 25-3/4 inches, the bar extends beyond those points by a small margin on each side, which impacts how close the hardware can be located to adjacent corners, doors, or vertical trim without visually crowding those elements. The projection of 3 inches defines how far the bar stands off from the finished wall surface, which affects both user reach and how towels hang without dragging against tile or paint during everyday use.

Using This Amerock Bath Hardware In Projects

Where The Clarendon 24 Towel Bar Fits

The category listing as Bath Hardware and Builders Hardware positions this Clarendon 24 inch towel bar for use in residential or light commercial bathrooms where coordinated fixtures are specified as part of a build package. The defined 24 inch center to center layout pairs well with standard stud spacing when conditions allow, which can be useful when integrating the bar into framed walls during earlier phases of construction. The overall length of 25-3/4 inches suits wall runs that offer at least that much clear horizontal space, helping installers visualize where this bar fits between common elements like vanities and tub surrounds. Because the product belongs to the Amerock Corporation Clarendon family by name, it can be selected when a project already calls for Clarendon bath hardware on other fixtures.

Dimensions That Support Consistent Installation

The stated center to center measurement of 24 inches gives a fixed reference for layout, so installers can mark, drill, and set anchors or backing with predictable results from one bathroom to the next. With an overall width of 2-5/6 inches, the bar and its supports occupy a modest vertical band on the wall, which helps keep alignment straightforward when matching heights with other bath hardware pieces in a room. The projection of 3 inches defines the stand-off distance, which allows towels to hang away from the wall plane, aiding airflow around the fabric during normal use. The overall length of 25-3/4 inches reinforces the need for at least that much usable wall width, so repeated installations in tract or multi-unit projects can follow the same spacing guidelines.

Buyer Questions About Clarendon 24 Towel Bar

Selecting This Clarendon Towel Bar For Your Job

The Clarendon 24 Towel Bar from Amerock Corporation combines a 24 inch center to center span with an overall length of 25-3/4 inches, giving installers defined wall space requirements for bathroom layouts. Its 3 inch projection and 2-5/6 inch overall width specify how far the bar stands off and how much vertical area it occupies, which supports consistent height and spacing decisions across multiple rooms. With its classification as Builders Hardware and Bath Hardware and its Clarendon name, this BH26504ORB model aligns well with projects that standardize on Amerock Clarendon bath components, so it can be ordered when those dimensions and that visual line match the planned bathroom design.